Nick: Elyes
E-mail: ehaouas@noos.fr
Board: ECS-945G
Contents: 
commit 92d6a861ce0e4727c911fd8d6aeba312b805f765 (HEAD, refs/bisect/bad)
flashrom# ./flashrom -p internal -VVV 
flashrom v0.9.7-unknown on Linux 5.4.0-4-amd64 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.6.4, GCC 9.3.0, little endian
Command line (3 args): ./flashrom -p internal -VVV
Calibrating delay loop... OS timer resolution is 2 usecs, 1266M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1006 us, 10000 myus = 11287 us, 8 myus = 10 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
page_size=1000
pre-rounding:  start=0x00000000000fc310, len=0x758, end=0x00000000000fca68
post-rounding: start=0x00000000000fc000, len=0x1000, end=0x00000000000fd000
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: "NEC COMPUTERS INTERNATIONAL"
DMI string system-product-name: "ECS-945G"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "NEC COMPUTERS INTERNATIONAL"
DMI string baseboard-product-name: "ECS-945G"
DMI string baseboard-version: "1.0"
Found Winbond Super I/O, id 0x88
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8. Enabling flash write... Root Complex Register Block address = 0xfed1c000
page_size=1000
pre-rounding:  start=0x00000000fed1c000, len=0x4000, end=0x00000000fed20000
post-rounding: start=0x00000000fed1c000, len=0x4000, end=0x00000000fed20000
GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (LPC)
Top Swap : not enabled

0x7fffffff/0x7fffffff FWH IDSEL: 0x0
0x7fffffff/0x7fffffff FWH IDSEL: 0x0
0x7fffffff/0x7fffffff FWH IDSEL: 0x1
0x7fffffff/0x7fffffff FWH IDSEL: 0x1
0x7fffffff/0x7fffffff FWH IDSEL: 0x2
0x7fffffff/0x7fffffff FWH IDSEL: 0x2
0x7fffffff/0x7fffffff FWH IDSEL: 0x3
0x7fffffff/0x7fffffff FWH IDSEL: 0x3
0x7fffffff/0x7fffffff FWH IDSEL: 0x4
0x7fffffff/0x7fffffff FWH IDSEL: 0x5
0x7fffffff/0x7fffffff FWH IDSEL: 0x6
0x7fffffff/0x7fffffff FWH IDSEL: 0x7
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
Maximum FWH chip size: 0x80000 bytesSPI Read Configuration: prefetching disabled, caching enabled, 
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
SPIBAR = 0x00007fddb851a000 + 0x3020
0x00: 0x0001     (SPIS)
0x02: 0x4260     (SPIC)
0x04: 0x00000000 (SPIA)
0x50: 0x00000000 (BBAR)
0x54: 0x5006     (PREOP)
0x56: 0x460b     (OPTYPE)
0x58: 0x05150302 (OPMENU)
0x5c: 0xc79f0190 (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
Programming OPCODES... 
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
        OP        Type      Pre-OP
op[0]: 0x02, write w/  addr, none
op[1]: 0x03, read  w/  addr, none
op[2]: 0xd8, write w/  addr, none
op[3]: 0x05, read  w/o addr, none
op[4]: 0x90, read  w/  addr, none
op[5]: 0x01, write w/o addr, none
op[6]: 0x9f, read  w/o addr, none
op[7]: 0xc7, write w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x50
OK.
The following protocols are supported: FWH, SPI.
Probing for AMIC A25L05PT, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L05PU, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L10PT, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L10PU, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L20PT, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L20PU, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L40PT, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L40PU, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L80P, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L16PT, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L16PU, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L512, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L010, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L020, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L040, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L080, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L016, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L032, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25LQ16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25LQ64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF021, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF041A, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF081, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF081A, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF161, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF321, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF321A, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF641(A), 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DQ161, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25F512, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000

program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190
on-the-fly OPCODE (0x15) re-programmed, op-pos=2
Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F512A, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F512B, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25F1024(A), 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F2048, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F4096, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25FS010, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25FS040, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF041, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF081A, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF161, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF161A, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26F004, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45CS1282, 16896 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fef80000 to 0x00007fddb7124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB011D, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB021D, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB041D, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB081D, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB161D, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB321C, 4224 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffbe0000 to 0x00007fddb7d84000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB321D, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB321E, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45DB642D, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for ESMT F25L008A, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B05, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B05T, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B10T, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B20T, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B40T, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B80T, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B16T, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B32T, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25B64T, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F05, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25F64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25Q40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25Q80(A), 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25Q16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25Q32(A/B), 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25Q64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25Q128, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25QH16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25QH32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25QH64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25QH128, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Eon EN25S64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25LQ32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q512, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q20(B), 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q40(B), 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q80(B), 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q16(B), 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q32(B), 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q64(B), 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25Q128B, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for GigaDevice GD25T80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Intel 25F160S33B8, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Intel 25F160S33T8, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Intel 25F320S33B8, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Intel 25F320S33T8, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Intel 25F640S33B8, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Intel 25F640S33T8, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L2005(C), 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L4005(A/C), 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L8005/MX25V8005, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L1605, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L1635D, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L1635E, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L3205(A), 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L3206E, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L3235D, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L6405(D), 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L6445E, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25L12805(D), 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25U1635E, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25U3235E/F, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Macronix MX25U6435E/F, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P05-A, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P05, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).

program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190
on-the-fly OPCODE (0xAB) re-programmed, op-pos=2
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 1).
Probing for Micron/Numonyx/ST M25P10-A, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 1).
Probing for Micron/Numonyx/ST M25P20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P20-old, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 1).
Probing for Micron/Numonyx/ST M25P40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P40-old, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 1).
Probing for Micron/Numonyx/ST M25P80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25P128, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PE10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PE20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PE40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PE80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PE16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PX80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PX16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PX32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M25PX64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M45PE10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M45PE20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M45PE40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M45PE80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST M45PE16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q016, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Nantronics N25S10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Nantronics N25S20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Nantronics N25S40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Nantronics N25S80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Nantronics N25S16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LD256C, 32 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff8000 to 0x00007fddb8512000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LD512(C), 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LD010(C), 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LD020(C), 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LD040(C), 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LV512(A), 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 3).
Probing for PMC Pm25LV010, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 3).
Probing for PMC Pm25LV010A, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LV020, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LV040, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LV080B, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for PMC Pm25LV016B, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Sanyo LE25FW203A, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Sanyo LE25FW403A, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Sanyo LE25FW418A, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 2).
Probing for Sanyo LE25FW806, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 2).
Probing for Sanyo LE25FW808, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 2).
Probing for Spansion S25FL004A, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL008A, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL016A, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL032A/P, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL064A/P, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL204K, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL208K, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL116K/S25FL216K, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Spansion S25FL128S......0, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25LF040A, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 2).
Probing for SST SST25LF080(A), 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0xab failed at address 0x000000 (payload length was 2).
Probing for SST SST25VF512A, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Probing for SST SST25VF010, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Probing for SST SST25VF020, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Probing for SST SST25VF020B, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25VF040, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Probing for SST SST25VF040B, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25VF040B.REMS, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Probing for SST SST25VF080B, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25VF016B, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25VF032B, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25VF064C, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25WF512, 64 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffff0000 to 0x00007fddb850a000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25WF010, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25WF020, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for SST SST25WF040, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q80.V, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q16.V, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q32.V, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q64.V, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q128.V, 16384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff000000 to 0x00007fddb71a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q20.W, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q40.W, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q80.W, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q16.W, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q32.W, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25Q64.W, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X10, 128 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffe0000 to 0x00007fddb8184000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X20, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X40, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X80, 1024 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X16, 2048 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7fa4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X32, 4096 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ffc00000 to 0x00007fddb7da4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Winbond W25X64, 8192 kB: programmer_map_flash_region: mapping flash chip from 0x00000000ff800000 to 0x00007fddb79a4000
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Unknown SFDP-capable chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
spi_sfdp_read_sfdp_chunk: addr=0x0, len=2, data:

program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190
on-the-fly OPCODE (0x5A) re-programmed, op-pos=2
Error: SCIP never cleared!
Running OPCODE 0x5a failed at address 0x000000 (payload length was 3).
Receiving SFDP signature failed.
Not unmapping zero size at 0xffffffffffffffff
Probing for AMIC unknown AMIC SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Not unmapping zero size at 0xffffffffffffffff
Probing for Atmel unknown Atmel SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for Eon unknown Eon SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for Macronix unknown Macronix SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for PMC unknown PMC SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for SST unknown SST SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for ST unknown ST SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for Generic unknown SPI chip (RDID), 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Not unmapping zero size at 0xffffffffffffffff
Probing for Generic unknown SPI chip (REMS), 0 kB: Not mapping flash chip, zero size at 0x0000000000000000.
programmer_map_flash_region: mapping flash chip from 0x0000000000000000 to 0xffffffffffffffff
Error: SCIP never cleared!
Running OPCODE 0x90 failed at address 0x000000 (payload length was 2).
Not unmapping zero size at 0xffffffffffffffff
Probing for Atmel AT49LH002, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
probe_82802ab: id1 0x56, id2 0xde, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for PMC Pm49FL004, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for Sharp LHF00L04, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb80a4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8164000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF003A/B, 384 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffa0000 to 0x00007fddb8144000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF004A/B, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8124000
probe_jedec_common: id1 0xbf, id2 0x60
programmer_map_flash_region: mapping flash chip registers from 0x00000000ffb80000 to 0x00007fddb80a4000
Found SST flash chip "SST49LF004A/B" (512 kB, FWH) at physical address 0xfff80000.
Lock status for 0x000000 (size 0x010000) is 00, full access
Lock status for 0x010000 (size 0x010000) is 00, full access
Lock status for 0x020000 (size 0x010000) is 00, full access
Lock status for 0x030000 (size 0x010000) is 00, full access
Lock status for 0x040000 (size 0x010000) is 00, full access
Lock status for 0x050000 (size 0x010000) is 00, full access
Lock status for 0x060000 (size 0x010000) is 00, full access
Lock status for 0x070000 (size 0x010000) is 00, full access
Probing for SST SST49LF004C, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb7fa4000
probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb7fa4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7ea4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb7fa4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb7fa4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8064000
probe_82802ab: id1 0x56, id2 0xde, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000ffe00000 to 0x00007fddb7ea4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb7fa4000
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V040FB, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V040FC, 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W49V002FA, 256 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fffc0000 to 0x00007fddb8064000
probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V080FA, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. programmer_map_flash_region: mapping flash chip from 0x00000000fff00000 to 0x00007fddb7fa4000
probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: programmer_map_flash_region: mapping flash chip from 0x00000000fff80000 to 0x00007fddb8024000
probe_jedec_common: id1 0xbf, id2 0x60
Found SST flash chip "SST49LF004A/B" (512 kB, FWH).
No operations were specified.
Restoring MMIO space at 0x7fddb851d070
Restoring MMIO space at 0x7fddb851d07c
Restoring MMIO space at 0x7fddb851d078
Restoring MMIO space at 0x7fddb851d076
Restoring MMIO space at 0x7fddb851d074