Nick: sunlight E-mail: dimka552687773@gmail.com Board: 945GZ7MC-KS2H Contents: 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.0.5-pf (root@Gentoo) (gcc version 4.6.1 (Gentoo 4.6.1-r1 p1.0, pie-0.4.5) ) #1 SMP Tue Oct 18 21:35:40 FET 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.0.5-pf root=/dev/sda1 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fedf800 (usable) [ 0.000000] BIOS-e820: 000000005fedf800 - 000000005fee0000 (reserved) [ 0.000000] BIOS-e820: 000000005fee0000 - 000000005fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fee3000 - 000000005fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000005fef0000 - 000000005ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: OEM OEM/945 7MC Series, BIOS 6.00 PG 01/19/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x5fedf max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 05FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f3710] f3710 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000005fedf000 [ 0.000000] 0000000000 - 005fe00000 page 2M [ 0.000000] 005fe00000 - 005fedf000 page 4k [ 0.000000] kernel direct mapping tables up to 5fedf000 @ 5fedb000-5fedf000 [ 0.000000] ACPI: RSDP 00000000000f7610 00014 (v00 IntelR) [ 0.000000] ACPI: RSDT 000000005fee3040 00034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000005fee30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000005fee3180 0477C (v01 INTELR AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000005fee0000 00040 [ 0.000000] ACPI: HPET 000000005fee7a40 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 000000005fee7ac0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000005fee7940 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00015fffff] PMD -> [ffff88005de00000-ffff88005f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005fedf [ 0.000000] On node 0 totalpages: 392814 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5317 pages used for memmap [ 0.000000] DMA32 zone: 383514 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 5ff00000 (gap: 5ff00000:80100000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88005fc00000 s68992 r8192 d21120 u1048576 [ 0.000000] pcpu-alloc: s68992 r8192 d21120 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387436 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.0.5-pf root=/dev/sda1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1535704k/1571708k available (5642k kernel code, 452k absent, 35552k reserved, 2840k data, 464k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3058.939 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.87 BogoMIPS (lpj=3058939) [ 0.002004] pid_max: default: 32768 minimum: 301 [ 0.002153] Security Framework initialized [ 0.002293] AppArmor: AppArmor initialized [ 0.002425] Mount-cache hash table entries: 256 [ 0.002713] Initializing cgroup subsys freezer [ 0.002875] CPU: Physical Processor ID: 0 [ 0.003002] CPU: Processor Core ID: 0 [ 0.003126] mce: CPU supports 4 MCE banks [ 0.003259] CPU0: Thermal monitoring enabled (TM1) [ 0.003386] using mwait in idle threads. [ 0.003533] ACPI: Core revision 20110413 [ 0.006378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.017033] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 [ 0.017998] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.017998] ... version: 0 [ 0.017998] ... bit width: 40 [ 0.017998] ... generic registers: 18 [ 0.017998] ... value mask: 000000ffffffffff [ 0.017998] ... max period: 0000007fffffffff [ 0.017998] ... fixed-purpose events: 0 [ 0.017998] ... event mask: 000000000003ffff [ 0.018659] Booting Node 0, Processors #1 Ok. [ 0.018836] smpboot cpu 1: start_ip = 9a000 [ 0.090007] Brought up 2 CPUs [ 0.090136] Total of 2 processors activated (12235.58 BogoMIPS). [ 0.091038] devtmpfs: initialized [ 0.091459] PM: Registering ACPI NVS region at 5fee0000 (12288 bytes) [ 0.091808] print_constraints: dummy: [ 0.091844] Time: 15:32:28 Date: 10/19/11 [ 0.092029] NET: Registered protocol family 16 [ 0.092763] ACPI: bus type pci registered [ 0.093048] dca service started, version 1.12.1 [ 0.093240] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.093440] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support [ 0.093643] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.136042] PCI: Using configuration type 1 for base access [ 0.147501] bio: create slab at 0 [ 0.148909] ACPI: EC: Look up EC in DSDT [ 0.153330] ACPI: Interpreter enabled [ 0.153459] ACPI: (supports S0 S3 S4 S5) [ 0.153800] ACPI: Using IOAPIC for interrupt routing [ 0.162626] ACPI: No dock devices found. [ 0.162757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.163086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.163275] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.163406] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.163534] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.163730] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.163929] pci_root PNP0A08:00: host bridge window [mem 0x5ff00000-0xfebfffff] [ 0.164029] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600 [ 0.164120] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.164140] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit] [ 0.164208] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.164213] pci 0000:00:1b.0: PME# disabled [ 0.164236] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.164304] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.164309] pci 0000:00:1c.0: PME# disabled [ 0.164338] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.164387] pci 0000:00:1d.0: reg 20: [io 0xff00-0xff1f] [ 0.164422] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.164470] pci 0000:00:1d.1: reg 20: [io 0xfe00-0xfe1f] [ 0.164505] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.164553] pci 0000:00:1d.2: reg 20: [io 0xfd00-0xfd1f] [ 0.164588] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.164637] pci 0000:00:1d.3: reg 20: [io 0xfc00-0xfc1f] [ 0.164679] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.164700] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff] [ 0.164780] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.164785] pci 0000:00:1d.7: PME# disabled [ 0.164805] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.165028] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 0.165123] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.165321] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f) [ 0.165518] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000f) [ 0.165747] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.165763] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.165774] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.165785] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.165796] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.165807] pci 0000:00:1f.1: reg 20: [io 0xfb00-0xfb0f] [ 0.165848] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 [ 0.165866] pci 0000:00:1f.2: reg 10: [io 0xfa00-0xfa07] [ 0.165876] pci 0000:00:1f.2: reg 14: [io 0xf900-0xf903] [ 0.165886] pci 0000:00:1f.2: reg 18: [io 0xf800-0xf807] [ 0.165896] pci 0000:00:1f.2: reg 1c: [io 0xf700-0xf703] [ 0.165906] pci 0000:00:1f.2: reg 20: [io 0xf600-0xf60f] [ 0.165916] pci 0000:00:1f.2: reg 24: [mem 0xfdffe000-0xfdffe3ff] [ 0.165944] pci 0000:00:1f.2: PME# supported from D3hot [ 0.165949] pci 0000:00:1f.2: PME# disabled [ 0.165965] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.166029] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.166137] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300 [ 0.166155] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.166173] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.166191] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.166203] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f] [ 0.166216] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.166292] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403 [ 0.166309] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.168005] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.168135] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.168140] pci 0000:00:1c.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.168148] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.168193] pci 0000:02:03.0: [10ec:8167] type 0 class 0x000200 [ 0.168214] pci 0000:02:03.0: reg 10: [io 0xee00-0xeeff] [ 0.168226] pci 0000:02:03.0: reg 14: [mem 0xfddff000-0xfddff0ff] [ 0.168275] pci 0000:02:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.168298] pci 0000:02:03.0: supports D1 D2 [ 0.168300] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.168306] pci 0000:02:03.0: PME# disabled [ 0.168355] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.168485] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.168490] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.168497] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.168501] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.168504] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.168507] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.168510] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.168513] pci 0000:00:1e.0: bridge window [mem 0x5ff00000-0xfebfffff] (subtractive decode) [ 0.168527] pci_bus 0000:00: on NUMA node 0 [ 0.168531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.168666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.168727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.168854] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.178271] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14) [ 0.178958] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14) *0, disabled. [ 0.179838] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14) [ 0.180610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14) [ 0.181314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14) *0, disabled. [ 0.182165] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14) *0, disabled. [ 0.183165] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14) *0, disabled. [ 0.184046] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14) [ 0.185100] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.185218] vgaarb: loaded [ 0.185340] vgaarb: bridge control possible 0000:01:00.0 [ 0.185792] SCSI subsystem initialized [ 0.186079] libata version 3.00 loaded. [ 0.186349] usbcore: registered new interface driver usbfs [ 0.186520] usbcore: registered new interface driver hub [ 0.186707] usbcore: registered new device driver usb [ 0.187176] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.187306] PCI: Using ACPI for IRQ routing [ 0.195452] PCI: pci_cache_line_size set to 64 bytes [ 0.195537] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.195541] reserve RAM buffer: 000000005fedf800 - 000000005fffffff [ 0.195801] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 0.195995] NetLabel: Initializing [ 0.196120] NetLabel: domain hash size = 128 [ 0.196246] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196386] NetLabel: unlabeled traffic allowed by default [ 0.196517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.196841] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.198997] Switching to clocksource hpet [ 0.201829] AppArmor: AppArmor Filesystem Enabled [ 0.202078] pnp: PnP ACPI init [ 0.202216] ACPI: bus type pnp registered [ 0.202471] pnp 00:00: [bus 00-ff] [ 0.202474] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.202478] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.202480] pnp 00:00: [io 0x0d00-0xffff window] [ 0.202483] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.202486] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.202488] pnp 00:00: [mem 0x5ff00000-0xfebfffff window] [ 0.202604] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.202701] pnp 00:01: [io 0x0010-0x001f] [ 0.202704] pnp 00:01: [io 0x0022-0x003f] [ 0.202707] pnp 00:01: [io 0x0044-0x005f] [ 0.202709] pnp 00:01: [io 0x0062-0x0063] [ 0.202712] pnp 00:01: [io 0x0065-0x006f] [ 0.202714] pnp 00:01: [io 0x0074-0x007f] [ 0.202716] pnp 00:01: [io 0x0091-0x0093] [ 0.202718] pnp 00:01: [io 0x00a2-0x00bf] [ 0.202721] pnp 00:01: [io 0x00e0-0x00ef] [ 0.202723] pnp 00:01: [io 0x04d0-0x04d1] [ 0.202725] pnp 00:01: [io 0x0290-0x029f] [ 0.202727] pnp 00:01: [io 0x0800-0x087f] [ 0.202730] pnp 00:01: [io 0x0290-0x0297] [ 0.202732] pnp 00:01: [io 0x0880-0x088f] [ 0.202840] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.202970] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.203112] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.203239] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.203366] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.203495] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203576] pnp 00:02: [dma 4] [ 0.203579] pnp 00:02: [io 0x0000-0x000f] [ 0.203581] pnp 00:02: [io 0x0080-0x0090] [ 0.203584] pnp 00:02: [io 0x0094-0x009f] [ 0.203586] pnp 00:02: [io 0x00c0-0x00df] [ 0.203654] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.203730] pnp 00:03: [irq 0 disabled] [ 0.203745] pnp 00:03: [irq 8] [ 0.203748] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.203820] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.203869] pnp 00:04: [io 0x0070-0x0073] [ 0.203936] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.203955] pnp 00:05: [io 0x0061] [ 0.204033] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.204050] pnp 00:06: [io 0x00f0-0x00ff] [ 0.204059] pnp 00:06: [irq 13] [ 0.204125] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.204323] pnp 00:07: [io 0x03f0-0x03f5] [ 0.204326] pnp 00:07: [io 0x03f7] [ 0.204333] pnp 00:07: [irq 6] [ 0.204336] pnp 00:07: [dma 2] [ 0.204426] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.204694] pnp 00:08: [io 0x03f8-0x03ff] [ 0.204702] pnp 00:08: [irq 4] [ 0.204815] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.205200] pnp 00:09: [io 0x02f8-0x02ff] [ 0.205208] pnp 00:09: [irq 3] [ 0.205308] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active) [ 0.205589] pnp 00:0a: [io 0x0378-0x037f] [ 0.205597] pnp 00:0a: [irq 7] [ 0.205693] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.205848] pnp 00:0b: [io 0x0060] [ 0.205851] pnp 00:0b: [io 0x0064] [ 0.205858] pnp 00:0b: [irq 1] [ 0.205930] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.205988] pnp 00:0c: [io 0x0400-0x04bf] [ 0.206100] system 00:0c: [io 0x0400-0x04bf] has been reserved [ 0.206231] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.206268] pnp 00:0d: [mem 0xffb80000-0xffbfffff] [ 0.206348] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active) [ 0.206636] pnp 00:0e: [mem 0xe0000000-0xefffffff] [ 0.206747] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved [ 0.206879] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.207114] pnp 00:0f: [mem 0x000ce200-0x000cffff] [ 0.207118] pnp 00:0f: [mem 0x000f0000-0x000f7fff] [ 0.207121] pnp 00:0f: [mem 0x000f8000-0x000fbfff] [ 0.207123] pnp 00:0f: [mem 0x000fc000-0x000fffff] [ 0.207126] pnp 00:0f: [mem 0x5fee0000-0x5fefffff] [ 0.207128] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.207131] pnp 00:0f: [mem 0x00100000-0x5fedffff] [ 0.207137] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.207139] pnp 00:0f: [mem 0xfec00000-0xfec00fff] [ 0.207142] pnp 00:0f: [mem 0xfed13000-0xfed1dfff] [ 0.207144] pnp 00:0f: [mem 0xfed20000-0xfed8ffff] [ 0.207146] pnp 00:0f: [mem 0xfee00000-0xfee00fff] [ 0.207149] pnp 00:0f: [mem 0xffb00000-0xffb7ffff] [ 0.207151] pnp 00:0f: [mem 0xfff00000-0xffffffff] [ 0.207154] pnp 00:0f: [mem 0x000e0000-0x000effff] [ 0.207271] system 00:0f: [mem 0x000ce200-0x000cffff] has been reserved [ 0.207402] system 00:0f: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.207531] system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.207660] system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.207788] system 00:0f: [mem 0x5fee0000-0x5fefffff] could not be reserved [ 0.207917] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.209491] system 00:0f: [mem 0x00100000-0x5fedffff] could not be reserved [ 0.209621] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.209749] system 00:0f: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.209877] system 00:0f: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.210017] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.210148] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.210275] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved [ 0.210403] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved [ 0.210532] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.210547] pnp: PnP ACPI: found 16 devices [ 0.210671] ACPI: ACPI bus type pnp unregistered [ 0.220192] PCI: max bus depth: 1 pci_try_num: 2 [ 0.220227] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref] [ 0.220429] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.220556] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.220687] pci 0000:00:1c.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.220817] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.221031] pci 0000:02:03.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 0.221228] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.221355] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.221485] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.221614] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.221839] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.221970] pci 0000:00:1c.0: setting latency timer to 64 [ 0.221980] pci 0000:00:1e.0: setting latency timer to 64 [ 0.221986] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.221989] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.221992] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.221995] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.221997] pci_bus 0000:00: resource 8 [mem 0x5ff00000-0xfebfffff] [ 0.222011] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.222014] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.222017] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.222020] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.222023] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.222025] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.222028] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.222031] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.222033] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.222036] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] [ 0.222038] pci_bus 0000:02: resource 8 [mem 0x5ff00000-0xfebfffff] [ 0.222085] NET: Registered protocol family 2 [ 0.222281] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.222931] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.225907] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.226763] TCP: Hash tables configured (established 262144 bind 65536) [ 0.226898] TCP reno registered [ 0.227046] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.227196] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.227483] NET: Registered protocol family 1 [ 0.227640] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x043a [ 0.227643] pci 0000:00:1d.0: Performing full reset [ 0.227662] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.227664] pci 0000:00:1d.1: Performing full reset [ 0.227682] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.227684] pci 0000:00:1d.2: Performing full reset [ 0.227702] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.227705] pci 0000:00:1d.3: Performing full reset [ 0.227766] pci 0000:01:00.0: Boot video device [ 0.227776] PCI: CLS 32 bytes, default 64 [ 0.228910] microcode: CPU0 sig=0xf49, pf=0x10, revision=0x3 [ 0.229064] microcode: CPU1 sig=0xf49, pf=0x10, revision=0x3 [ 0.229272] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.229778] audit: initializing netlink socket (disabled) [ 0.229917] type=2000 audit(1319038348.228:1): initialized [ 0.257069] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.261791] VFS: Disk quotas dquot_6.5.2 [ 0.262057] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.263272] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 0.263571] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.263856] fuse init (API version 7.16) [ 0.264931] Btrfs loaded [ 0.265083] msgmni has been set to 2999 [ 0.265690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.265889] io scheduler noop registered [ 0.266039] io scheduler deadline registered [ 0.266254] io scheduler cfq registered (default) [ 0.266507] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.266700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.267171] uvesafb: failed to execute /sbin/v86d [ 0.267298] uvesafb: make sure that the v86d helper is installed and executable [ 0.267494] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 0.267621] uvesafb: vbe_init() failed with -22 [ 0.267749] uvesafb: probe of uvesafb.0 failed with error -22 [ 0.267970] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.268220] ACPI: Power Button [PWRB] [ 0.268453] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.268652] ACPI: Power Button [PWRF] [ 0.268900] ACPI: Fan [FAN] (on) [ 0.269194] ACPI: acpi_idle registered with cpuidle [ 0.271759] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.271888] ACPI: Thermal Zone [THRM] (40 C) [ 0.272094] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.272443] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.537115] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.805115] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.835845] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.839552] Non-volatile memory driver v1.3 [ 0.839738] [drm] Initialized drm 1.1.0 20060810 [ 0.840255] ata_piix 0000:00:1f.1: version 2.13 [ 0.840286] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.840459] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.840988] scsi0 : ata_piix [ 0.841283] scsi1 : ata_piix [ 0.841994] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 0.842140] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 0.842311] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.842485] ata_piix 0000:00:1f.2: MAP [ [ 0.842515] ata2: port disabled. ignoring. [ 0.842665] P0 P2 P1 P3 ] [ 0.843030] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.843584] scsi2 : ata_piix [ 0.843828] scsi3 : ata_piix [ 0.844668] ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19 [ 0.844799] ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19 [ 0.845351] SSFDC read-only Flash Translation layer [ 0.845520] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.845669] r8169 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.845825] r8169 0000:02:03.0: (unregistered net_device): no PCI Express capability [ 0.846408] r8169 0000:02:03.0: eth0: RTL8169sc/8110sc at 0xffffc9000000e000, 00:15:58:5b:3b:63, XID 18000000 IRQ 16 [ 0.846675] console [netcon0] enabled [ 0.846799] netconsole: network logging started [ 0.847137] Generic UIO driver for PCI 2.3 devices version: 0.01.0 [ 0.847518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.847648] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.847685] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.847828] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.847832] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.847977] drivers/usb/core/inode.c: creating file 'devices' [ 0.847982] drivers/usb/core/inode.c: creating file '001' [ 0.848117] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.848324] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 0.848329] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.848352] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.848488] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.852378] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.852381] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.852403] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.852533] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.856404] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.862024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.862183] usb usb1: default language 0x0409 [ 0.862192] usb usb1: udev 1, busnum 1, minor = 0 [ 0.862195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.862323] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862519] usb usb1: Product: EHCI Host Controller [ 0.862643] usb usb1: Manufacturer: Linux 3.0.5-pf ehci_hcd [ 0.862769] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.863018] usb usb1: usb_probe_device [ 0.863023] usb usb1: configuration #1 chosen from 1 choice [ 0.863033] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.863096] hub 1-0:1.0: usb_probe_interface [ 0.863100] hub 1-0:1.0: usb_probe_interface - got id [ 0.863102] hub 1-0:1.0: USB hub found [ 0.863231] hub 1-0:1.0: 8 ports detected [ 0.863355] hub 1-0:1.0: standalone hub [ 0.863357] hub 1-0:1.0: no power switching (usb 1.0) [ 0.863360] hub 1-0:1.0: individual port over-current protection [ 0.863362] hub 1-0:1.0: power on to power good time: 20ms [ 0.863368] hub 1-0:1.0: local power source is good [ 0.863370] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.863409] drivers/usb/core/inode.c: creating file '001' [ 0.863496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.863625] ohci_hcd: block sizes: ed 80 td 96 [ 0.863684] uhci_hcd: USB Universal Host Controller Interface driver [ 0.863868] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.864016] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.864021] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.864151] drivers/usb/core/inode.c: creating file '002' [ 0.864236] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.864441] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.864569] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.864572] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.864586] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.864594] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 0.864763] usb usb2: default language 0x0409 [ 0.864773] usb usb2: udev 1, busnum 2, minor = 128 [ 0.864775] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.864903] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.865112] usb usb2: Product: UHCI Host Controller [ 0.865238] usb usb2: Manufacturer: Linux 3.0.5-pf uhci_hcd [ 0.865363] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.865599] usb usb2: usb_probe_device [ 0.865603] usb usb2: configuration #1 chosen from 1 choice [ 0.865612] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.865673] hub 2-0:1.0: usb_probe_interface [ 0.865677] hub 2-0:1.0: usb_probe_interface - got id [ 0.865679] hub 2-0:1.0: USB hub found [ 0.865807] hub 2-0:1.0: 2 ports detected [ 0.865930] hub 2-0:1.0: standalone hub [ 0.865932] hub 2-0:1.0: no power switching (usb 1.0) [ 0.865935] hub 2-0:1.0: individual port over-current protection [ 0.865937] hub 2-0:1.0: power on to power good time: 2ms [ 0.865942] hub 2-0:1.0: local power source is good [ 0.865945] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.865963] drivers/usb/core/inode.c: creating file '001' [ 0.865996] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 0.866033] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.866168] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.866171] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.866301] drivers/usb/core/inode.c: creating file '003' [ 0.866378] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.866582] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.866709] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.866712] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.866726] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.866736] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 0.866903] usb usb3: default language 0x0409 [ 0.866912] usb usb3: udev 1, busnum 3, minor = 256 [ 0.866915] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.867056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.867253] usb usb3: Product: UHCI Host Controller [ 0.867377] usb usb3: Manufacturer: Linux 3.0.5-pf uhci_hcd [ 0.867503] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.867739] usb usb3: usb_probe_device [ 0.867743] usb usb3: configuration #1 chosen from 1 choice [ 0.867754] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.867816] hub 3-0:1.0: usb_probe_interface [ 0.867819] hub 3-0:1.0: usb_probe_interface - got id [ 0.867821] hub 3-0:1.0: USB hub found [ 0.867950] hub 3-0:1.0: 2 ports detected [ 0.868096] hub 3-0:1.0: standalone hub [ 0.868099] hub 3-0:1.0: no power switching (usb 1.0) [ 0.868101] hub 3-0:1.0: individual port over-current protection [ 0.868104] hub 3-0:1.0: power on to power good time: 2ms [ 0.868110] hub 3-0:1.0: local power source is good [ 0.868113] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.868133] drivers/usb/core/inode.c: creating file '001' [ 0.868165] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 0.868186] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.868320] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.868324] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.868453] drivers/usb/core/inode.c: creating file '004' [ 0.868525] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.868728] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.868855] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.868858] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.868872] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.868893] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 0.869087] usb usb4: default language 0x0409 [ 0.869096] usb usb4: udev 1, busnum 4, minor = 384 [ 0.869098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.869228] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869424] usb usb4: Product: UHCI Host Controller [ 0.869549] usb usb4: Manufacturer: Linux 3.0.5-pf uhci_hcd [ 0.869674] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.869901] usb usb4: usb_probe_device [ 0.869905] usb usb4: configuration #1 chosen from 1 choice [ 0.869913] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.869977] hub 4-0:1.0: usb_probe_interface [ 0.869981] hub 4-0:1.0: usb_probe_interface - got id [ 0.869984] hub 4-0:1.0: USB hub found [ 0.870125] hub 4-0:1.0: 2 ports detected [ 0.870249] hub 4-0:1.0: standalone hub [ 0.870251] hub 4-0:1.0: no power switching (usb 1.0) [ 0.870253] hub 4-0:1.0: individual port over-current protection [ 0.870255] hub 4-0:1.0: power on to power good time: 2ms [ 0.870260] hub 4-0:1.0: local power source is good [ 0.870263] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.870281] drivers/usb/core/inode.c: creating file '001' [ 0.870312] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 0.870333] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.870468] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.870471] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.870602] drivers/usb/core/inode.c: creating file '005' [ 0.870685] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.870889] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.871041] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.871044] uhci_hcd 0000:00:1d.3: Performing full reset [ 0.871059] uhci_hcd 0000:00:1d.3: supports USB remote wakeup [ 0.871077] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 0.871247] usb usb5: default language 0x0409 [ 0.871255] usb usb5: udev 1, busnum 5, minor = 512 [ 0.871257] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.871387] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.871582] usb usb5: Product: UHCI Host Controller [ 0.871707] usb usb5: Manufacturer: Linux 3.0.5-pf uhci_hcd [ 0.871832] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.872071] usb usb5: usb_probe_device [ 0.872075] usb usb5: configuration #1 chosen from 1 choice [ 0.872083] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.872147] hub 5-0:1.0: usb_probe_interface [ 0.872151] hub 5-0:1.0: usb_probe_interface - got id [ 0.872153] hub 5-0:1.0: USB hub found [ 0.872281] hub 5-0:1.0: 2 ports detected [ 0.872406] hub 5-0:1.0: standalone hub [ 0.872408] hub 5-0:1.0: no power switching (usb 1.0) [ 0.872410] hub 5-0:1.0: individual port over-current protection [ 0.872412] hub 5-0:1.0: power on to power good time: 2ms [ 0.872417] hub 5-0:1.0: local power source is good [ 0.872419] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.872437] drivers/usb/core/inode.c: creating file '001' [ 0.872472] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 [ 0.872588] usbcore: registered new interface driver uas [ 0.872715] Initializing USB Mass Storage driver... [ 0.872912] usbcore: registered new interface driver usb-storage [ 0.873063] USB Mass Storage support registered. [ 0.873255] usbcore: registered new interface driver libusual [ 0.873615] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.873745] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.875552] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.875823] mousedev: PS/2 mouse device common for all mice [ 0.876161] I2O subsystem v1.325 [ 0.876286] i2o: max drivers = 8 [ 0.876602] rtc_cmos 00:04: RTC can wake from S4 [ 0.876869] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.877051] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.877224] i2c /dev entries driver [ 0.877424] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.877816] Linux media interface: v0.10 [ 0.877986] Linux video capture interface: v2.00 [ 0.878223] usbcore: registered new interface driver uvcvideo [ 0.878350] USB Video Class driver (v1.1.0) [ 0.878849] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 0.879168] cpuidle: using governor ladder [ 0.880049] usbcore: registered new interface driver usbhid [ 0.880176] usbhid: USB HID core driver [ 0.880732] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.880959] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 0.891013] hda_codec: ALC861: BIOS auto-probing. [ 0.893879] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.895295] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.895495] hda_intel: Disabling MSI [ 0.895642] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 0.963042] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.963047] hub 1-0:1.0: port 4: status 0501 change 0001 [ 0.965045] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.968039] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 [ 0.970035] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.972035] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.027343] ata4.01: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133 [ 1.027474] ata4.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.033338] ata4.01: configured for UDMA/133 [ 1.045260] ata3.01: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 [ 1.045388] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.063026] hub 1-0:1.0: state 7 ports 8 chg 0010 evt 0000 [ 1.063034] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 1.086260] ata3.01: configured for UDMA/133 [ 1.086540] scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 1.086991] sd 2:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.087150] sd 2:0:1:0: Attached scsi generic sg0 type 0 [ 1.087441] scsi 3:0:1:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5 [ 1.087449] sd 2:0:1:0: [sda] Write Protect is off [ 1.087470] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.087501] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.088243] sd 3:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.088376] sd 3:0:1:0: Attached scsi generic sg1 type 0 [ 1.088651] sd 3:0:1:0: [sdb] Write Protect is off [ 1.088779] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.088811] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.114316] ehci_hcd 0000:00:1d.7: port 4 full speed --> companion [ 1.114323] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 1.114329] hub 1-0:1.0: port 4 not reset yet, waiting 50ms [ 1.117020] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.127047] sdb: sdb1 sdb2 sdb4 < > [ 1.127638] sd 3:0:1:0: [sdb] Attached SCSI disk [ 1.135827] sda: sda1 sda3 < sda5 sda6 > [ 1.136470] sd 2:0:1:0: [sda] Attached SCSI disk [ 1.147020] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.165029] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.165053] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.165056] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010 [ 1.177020] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.204048] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 1.204057] uhci_hcd 0000:00:1d.1: port 2 portsc 0093,00 [ 1.204065] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 1.207020] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.228025] Refined TSC clocksource calibration: 3058.999 MHz. [ 1.228175] Switching to clocksource tsc [ 1.252497] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input3 [ 1.252835] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input4 [ 1.253179] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input5 [ 1.253509] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input6 [ 1.254536] usbcore: registered new interface driver snd-usb-audio [ 1.254666] ALSA device list: [ 1.254789] #0: HDA Intel at 0xfdff8000 irq 16 [ 1.254912] #1: HDA NVidia at 0xfcffc000 irq 16 [ 1.255046] oprofile: using NMI interrupt. [ 1.255178] Netfilter messages via NETLINK v0.30. [ 1.255322] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.255808] ctnetlink v0.93: registering with nfnetlink. [ 1.256251] IPv4 over IPv4 tunneling driver [ 1.257104] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.257278] TCP cubic registered [ 1.257402] NET: Registered protocol family 17 [ 1.257529] Registering the dns_resolver key type [ 1.257918] TuxOnIce 3.2 (http://tuxonice.net) [ 1.258136] Scanning swap devices for TuxOnIce signature... [ 1.293404] - Trying 8:17. [ 1.298362] TuxOnIce scan: No image found. [ 1.298366] Scanning swap devices for TuxOnIce signature... [ 1.302253] - Trying 8:17. [ 1.302996] TuxOnIce scan: No image found. [ 1.303126] TuxOnIce: No image found. [ 1.303556] PM: Checking hibernation image partition 8:17 [ 1.303560] PM: Hibernation image partition 8:17 present [ 1.303562] PM: Looking for hibernation image. [ 1.303674] PM: Image not found (code -22) [ 1.303677] PM: Hibernation image not present or could not be loaded. [ 1.303696] registered taskstats version 1 [ 1.304107] Magic number: 15:520:538 [ 1.304428] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 1.304885] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.308030] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 1.309184] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 1.313774] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.313904] EXT4-fs (sda1): write access will be enabled during recovery [ 1.410022] usb 3-2: new full speed USB device number 2 using uhci_hcd [ 1.530017] usb 3-2: ep0 maxpacket = 8 [ 1.548936] usb 3-2: skipped 1 descriptor after interface [ 1.553934] usb 3-2: default language 0x0409 [ 1.566944] usb 3-2: udev 2, busnum 3, minor = 257 [ 1.566948] usb 3-2: New USB device found, idVendor=09da, idProduct=0080 [ 1.567087] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.567218] usb 3-2: Product: USB Mouse [ 1.567341] usb 3-2: Manufacturer: A4Tech [ 1.567643] usb 3-2: usb_probe_device [ 1.567650] usb 3-2: configuration #1 chosen from 1 choice [ 1.572941] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 1.573063] usbhid 3-2:1.0: usb_probe_interface [ 1.573068] usbhid 3-2:1.0: usb_probe_interface - got id [ 1.576259] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7 [ 1.576822] generic-usb 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-2/input0 [ 1.577103] drivers/usb/core/inode.c: creating file '002' [ 1.577136] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 1.954055] usb usb5: suspend_rh (auto-stop) [ 1.954061] usb usb2: suspend_rh (auto-stop) [ 1.954102] usb usb4: suspend_rh (auto-stop) [ 3.371074] EXT4-fs (sda1): recovery complete [ 3.371596] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.371811] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 3.423586] devtmpfs: mounted [ 3.424717] Freeing unused kernel memory: 464k freed [ 3.425141] BFS CPU scheduler v0.406 by Con Kolivas. [ 6.611554] udevd[1147]: starting version 171 [ 7.844025] nvidia: module license 'NVIDIA' taints kernel. [ 7.844031] Disabling lock debugging due to kernel taint [ 8.994711] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.994725] nvidia 0000:01:00.0: setting latency timer to 64 [ 8.994733] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.994954] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 285.05.09 Fri Sep 23 17:31:57 PDT 2011 [ 19.187685] EXT4-fs (sda1): re-mounted. Opts: (null) [ 19.297686] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 19.352271] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 19.364815] device fsid 586df097-9b9c-4994-a380-3b4334c0f176 devid 1 transid 7882 /dev/sda6 [ 22.116149] Adding 204796k swap on /dev/sdb1. Priority:-1 extents:1 across:204796k [ 23.096331] r8169 0000:02:03.0: eth0: link down [ 24.721729] r8169 0000:02:03.0: eth0: link up [ 26.805095] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 2, phase 1, 17 us [ 43.386402] EXT4-fs (sda1): re-mounted. Opts: commit=0 [ 43.542079] EXT4-fs (sdb2): re-mounted. Opts: commit=0 [ 43.551049] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 55.968450] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 55.968467] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [ 55.970197] CPU1: Core temperature/speed normal [ 55.970202] CPU0: Core temperature/speed normal [ 300.701023] [Hardware Error]: Machine check events logged [ 363.863258] CPU0: Core temperature above threshold, cpu clock throttled (total events = 2226) [ 363.863276] CPU1: Core temperature above threshold, cpu clock throttled (total events = 2226) [ 363.866811] CPU0: Core temperature/speed normal [ 363.866816] CPU1: Core temperature/speed normal [ 450.702034] [Hardware Error]: Machine check events logged [ 817.782956] CPU0: Core temperature above threshold, cpu clock throttled (total events = 2374) [ 817.782976] CPU1: Core temperature above threshold, cpu clock throttled (total events = 2374) [ 817.786494] CPU1: Core temperature/speed normal [ 817.786500] CPU0: Core temperature/speed normal [ 900.704015] [Hardware Error]: Machine check events logged