Nick: andrei_
E-mail: andrei.tolstov@gmail.com
Board: jetway 865gdmp
Contents: 
flashrom v0.9.4-r1394 on Linux 2.6.38-10-generic-pae (i686), built with libpci 3.1.7, GCC 4.5.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1788M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 988 us, 10000 myus = 10326 us, 4 myus = 9 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "865-Series"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write... 
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
This chipset supports the following protocols: FWH.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x53, id2 0x39, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x34
Found Winbond flash chip "W39V040FA" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is active.
Hardware remaining chip locking (#WP) is active..
Software 64 kB bootblock locking is not active.
Software 16 kB bootblock locking is not active.
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xda, id2 0x34
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x34
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0x4e