Nick: anon13515135 E-mail: none Board: i945 ThinkPad x60s Contents: [root@x60s libreboot_r20160907_util]# ./flash i945lenovo_firstflash /root/bin/x60/seabios_x60_libgfxinit_corebootfb.rom Mode selected: i945lenovo_firstflash bucts utility version 'withoutgit' Using LPC bridge 8086:27b9 at 0000:1f.00 Current BUC.TS=1 - 64kb address ranges at 0xFFFE0000 and 0xFFFF0000 are swapped Not writing BUC register since TS is already correct. flashrom v0.9.9-unknown on Linux 5.10.191-gnu1-1-lts (i686) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH7M". Enabling flash write... WARNING: SPI Configuration Lockdown activated. OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. flashrom v0.9.9-unknown on Linux 5.10.191-gnu1-1-lts (i686) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH7M". Enabling flash write... WARNING: SPI Configuration Lockdown activated. OK. Found Macronix flash chip "MX25L1605D/MX25L1608D/MX25L1673E" (2048 kB, SPI) mapped at physical address 0xffe00000. Reading old flash chip contents... done. Erasing and writing flash chip... spi_block_erase_20 failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Transaction error! spi_block_erase_d8 failed during command execution at address 0x1f0000 Reading current flash chip contents... done. Looking for another erase function. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: "! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!