Nick: timschumi
E-mail: none
Board: Lenovo M600
Contents: 
# flashrom -p internal --ifd -i bios --noverify-all -w m600-bios-allreplace.img
flashrom v1.3.0 on Linux 6.6.28 (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found chipset "Intel Braswell".
Enabling flash write... Warning: BIOS region SMM protection is enabled!
Warning: Setting BIOS Control at 0x0 from 0x2a to 0x09 failed.
New value is 0x2a.
SPI Configuration is locked down.
FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only.
FREG1: BIOS region (0x00300000-0x007fffff) is read-write.
FREG2: Management Engine region (0x00001000-0x002fffff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see https://flashrom.org/ME for details.
PR0: Warning: 0x0073b000-0x0079ffff is read-only.
PR1: Warning: 0x007a1000-0x007e0fff is read-only.
At least some flash regions are read protected. You have to use a flash
layout and include only accessible regions. For write operations, you'll
additionally need the --noverify-all switch. See manpage for more details.
Enabling hardware sequencing because some important opcode is locked.
OK.
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) on internal.
Reading ich descriptor... done.
Using region: "bios".
Reading old flash chip contents... done.
Erasing and writing flash chip... Transaction error between offset 0x0032f000 and 0x0032f000 (= 0x0032f000 + 0)!
Reading current flash chip contents... done. Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. 
Your flash chip is in an unknown state.
Get help on IRC (see https://www.flashrom.org/Contact) or mail
flashrom@flashrom.org with the subject "FAILED: <your board name>"!-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!