Nick: Guest12
E-mail: none
Board: linux_spi
Contents: 
flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=128 -r rom3.bin -c "MX25L6406E/MX25L6408E" -VVV
flashrom v1.2 on Linux 5.15.84-v7+ (armv7l)
flashrom is free software, get the source code at https://flashrom.org

flashrom was built with libpci 3.6.4, GCC 9.2.1 20200123, little endian
Command line (7 args): flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=128 -r rom3.bin -c MX25L6406E/MX25L6408E -VVV
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing linux_spi programmer
Using device /dev/spidev0.0
Using 128kHz clock
linux_spi_init: Using value from /sys/module/spidev/parameters/bufsiz as max buffer size.
linux_spi_init: max_kernel_buf_size: 4096
The following protocols are supported: SPI.
Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: programmer_map_flash_region: mapping MX25L6406E/MX25L6408E from 0xff800000 to 0x00000000
RDID returned 0x85 0x00 0xa8. probe_spi_rdid_generic: id1 0x85, id2 0xa8
programmer_unmap_flash_region: unmapped 0x00000000
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.