Nick: gabu
E-mail: none
Board: unknown
Contents: 
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Using default programmer "internal" with arguments "".
coreboot table found at 0x7cc13000.
Found chipset "Intel Braswell".
Enabling flash write... Warning: Setting BIOS Control at 0x0 from 0x0b to 0x09 failed.
New value is 0x0b.
SPI Configuration is locked down.
FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only.
FREG2: Management Engine region (0x00001000-0x001fffff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see https://flashrom.org/ME for details.
At least some flash regions are read protected. You have to use a flash
layout and include only accessible regions. For write operations, you'll
additionally need the --noverify-all switch. See manpage for more details.
OK.
Found Winbond flash chip "W25Q64.W" (8192 kB, SPI) mapped at physical address 0x00000000ff800000.
WP: status: 0x0080
WP: status.srp0: 1
WP: status.srp1: 0
WP: write protect is enabled.
WP: write protect range: start=0x00000000, len=0x00000000
SUCCESS