Nick: Guest65 E-mail: juanmafont@gmail.com Board: #flashrom Contents: Full log flashrom: flashrom dc8caac9-dirty on Linux 6.1.11-1-MANJARO (x86_64) flashrom was built with unknown PCI library, GCC 11.3.0, little endian Command line (10 args): /tmp/flashrom -p internal --ifd -i bios -N -w coreboot_t iano-auron_yuna-mrchromebox_20230129.rom -o /tmp/flashrom.log Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "intel-spi", is_writeable: 1, numeraseregions: 0, tot al_size: 8388608, erasesize: 4096 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Added layout entry 00000000 - 00 7fffff named complete flash Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) m apped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific). Reading ich descriptor... done. Assuming chipset '8 series Lynx Point'. Added layout entry 00000000 - 00000fff named fd Added layout entry 00200000 - 007fffff named bios Added layout entry 00001000 - 001fffff named me restore_power_management: Re-enabling power management. Using region: "bios". Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. disable_power_management: Disabling power management. disable_power_management: Failed to open /run/lock/power_override/flashrom.lock for writing: No such file or directory Reading old flash chip contents... 0x200000-0x7fffff:R done. fix_erasers_if_needed: kept all erasers fill_sorted_erasers: found 1 valid erasers 200000..3ebfff 1000 x 492 eraser 0 3f0000..3f0fff 1000 x 1 eraser 0 3f4000..3f5fff 1000 x 2 eraser 0 3f8000..3f8fff 1000 x 1 eraser 0 400000..41cfff 1000 x 29 eraser 0 5ff000..5fffff 1000 x 1 eraser 0 604000..76efff 1000 x 363 eraser 0 79f000..7d6fff 1000 x 56 eraser 0 7fd000..7fffff 1000 x 3 eraser 0 Erasing and writing flash chip... 0x200000-0x200fff: Elinux_mtd_erase: MEMERASE ioctl call returned -1, error: Unknown error 524 ERASE_FAILED FAILED! Uh oh. Erase/write failed. Your flash chip is in an unknown state. Get help on IRC (see https://www.flashrom.org/Contact) or mail flashrom@flashrom.org with the subject "FAILED: "!------------- ------------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! restore_power_management: Re-enabling power management. FAILED restore_power_management: Re-enabling power management.