Nick: pork_soda E-mail: none Board: HP elitedesk 8200 sff Contents: root@mx:~/coreboot# flashrom -p internal -w build/coreboot.rom -c "W25Q64BV/W25Q64CV/W25Q64FV" -i bios -l ../rw-only8200.txt --noverify-all flashrom v1.2-962-g6f5c8fd on Linux 5.10.0-17-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Using region: "bios". Found chipset "Intel Q67". Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting BIOS Control at 0xdc from 0x22 to 0x01 failed. New value is 0x22. SPI Configuration is locked down. FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. FREG1: BIOS region (0x00510000-0x007fffff) is read-write. FREG2: Management Engine region (0x00003000-0x0050ffff) is locked. FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see https://flashrom.org/ME for details. At least some flash regions are read protected. You have to use a flash layout and include only accessible regions. For write operations, you'll additionally need the --noverify-all switch. See manpage for more details. OK. Found Winbond flash chip "W25Q64BV/W25Q64CV/W25Q64FV" (8192 kB, SPI) mapped at physical address 0x00000000ff800000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_write_cmd failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Transaction error! Can't read! Aborting. FAILED! Uh oh. Erase/write failed. Your flash chip is in an unknown state. Get help on IRC (see https://www.flashrom.org/Contact) or mail flashrom@flashrom.org with the subject "FAILED: "!------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!