Nick: PaulePanter E-mail: none Board: ASUS F2A85-M PRO Contents: $ git log --no-decorate --oneline -2 eb5af81a0d sb/amd/hudson: Skip setting up LPC decode for base < 0x20 42a4641010 [NEEDSTEST]cpu/amd/family15: Use parallel_mp $ build/cbfstool build/coreboot.rom add-payload -n fallback/payload -f bzImage -c none -C "earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8 root=/dev/sda3" [NOTE ] coreboot-4.17-92-geb5af81a0d Wed Jun 8 21:46:48 UTC 2022 bootblock starting (log level: 7)... [DEBUG] FMAP: Found "FLASH" version 1.1 at 0x10000. [DEBUG] FMAP: base = 0xff000000 size = 0x1000000 #areas = 4 [DEBUG] FMAP: area COREBOOT found @ 10200 (16711168 bytes) [INFO ] CBFS: mcache @0x00034e00 built for 13 files, used 0x2dc of 0x4000 bytes [INFO ] CBFS: Found 'fallback/romstage' @0x20e00 size 0x4d2c8 in mcache @0x00034f6c [DEBUG] BS: bootblock times (exec / console): total (unknown) / 24 ms [NOTE ] coreboot-4.17-92-geb5af81a0d Wed Jun 8 21:46:48 UTC 2022 romstage starting (log level: 7)... [DEBUG] APIC 00: CPU Family_Model = 00610f31 [DEBUG] APIC 00: ** Enter AmdInitReset [00020007] [DEBUG] Fch OEM config in INIT RESET [DEBUG] AmdInitReset() returned AGESA_SUCCESS [DEBUG] APIC 00: Heap in LocalCache (2) at 0x00400000 [DEBUG] APIC 00: ** Exit AmdInitReset [00020007] [DEBUG] APIC 00: ** Enter AmdInitEarly [00020002] [DEBUG] AmdInitEarly() returned AGESA_SUCCESS [DEBUG] APIC 00: Heap in LocalCache (2) at 0x00400000 [DEBUG] APIC 00: ** Exit AmdInitEarly [00020002] [DEBUG] APIC 00: ** Enter AmdInitPost [00020006] [ERROR] -------------SPD READ ERROR----------- [ERROR] -------------SPD READ ERROR----------- [DEBUG] AmdInitPost() returned AGESA_SUCCESS [DEBUG] APIC 00: Heap in TempMem (3) at 0x000b0000 [DEBUG] APIC 00: ** Exit AmdInitPost [00020006] [DEBUG] CBMEM: [DEBUG] IMD: root @ 0x5ffff000 254 entries. [DEBUG] IMD: root @ 0x5fffec00 62 entries. [DEBUG] FMAP: area COREBOOT found @ 10200 (16711168 bytes) [DEBUG] Normal boot [INFO ] CBFS: Found 'fallback/postcar' @0x2300 size 0x4f04 in mcache @0x00034ee8 [DEBUG] Loading module at 0x5ffd2000 with entry 0x5ffd2034. filesize: 0x4be0 memsize: 0xaec0 [DEBUG] Processing 185 relocs. Offset value of 0x5dfd2000 [DEBUG] BS: romstage times (exec / console): total (unknown) / 55 ms [NOTE ] coreboot-4.17-92-geb5af81a0d Wed Jun 8 21:46:48 UTC 2022 postcar starting (log level: 7)... [DEBUG] FMAP: area COREBOOT found @ 10200 (16711168 bytes) [INFO ] CBFS: Found 'fallback/ramstage' @0x6e180 size 0x22ad8 in mcache @0x5fffeb0c [DEBUG] Loading module at 0x5feb8000 with entry 0x5feb8000. filesize: 0x493f0 memsize: 0x1187a0 [DEBUG] Processing 4288 relocs. Offset value of 0x5beb8000 [DEBUG] BS: postcar times (exec / console): total (unknown) / 20 ms [NOTE ] coreboot-4.17-92-geb5af81a0d Wed Jun 8 21:46:48 UTC 2022 ramstage starting (log level: 7)... [DEBUG] Normal boot [DEBUG] APIC 00: ** Enter AmdInitEnv [00020003] [DEBUG] Wiped HEAP at [10000000 - 1002ffff] [DEBUG] Fch OEM config in INIT ENV [DEBUG] AmdInitEnv() returned AGESA_SUCCESS [DEBUG] APIC 00: Heap in SystemMem (4) at 0x10000014 [DEBUG] APIC 00: ** Exit AmdInitEnv [00020003] [DEBUG] BS: BS_PRE_DEVICE entry times (exec / console): 25 / 15 ms [INFO ] Enumerating buses... [DEBUG] Root Device scanning... [DEBUG] CPU_CLUSTER: 0 enabled [DEBUG] DOMAIN: 0000 enabled [DEBUG] DOMAIN: 0000 scanning... [DEBUG] PCI: pci_scan_bus for bus 00 [DEBUG] PCI: 00:00.0 [1022/1410] enabled [DEBUG] PCI: 00:00.2 [1022/1419] enabled [DEBUG] PCI: 00:01.0 [1002/9996] enabled [DEBUG] PCI: 00:01.1 [1002/9902] enabled [INFO ] PCI: Static device PCI: 00:02.0 not found, disabling it. [DEBUG] hudson_enable() [INFO ] PCI: Static device PCI: 00:10.0 not found, disabling it. [DEBUG] hudson_enable() [INFO ] PCI: Static device PCI: 00:10.1 not found, disabling it. [DEBUG] hudson_enable() [DEBUG] PCI: 00:11.0 [1022/7801] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:12.0 [1022/7807] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:12.2 [1022/7808] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:13.0 [1022/7807] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:13.2 [1022/7808] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:14.0 [1022/780b] enabled [DEBUG] hudson_enable() [DEBUG] hudson_enable() [DEBUG] PCI: 00:14.2 [1022/780d] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:14.3 [1022/780e] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:14.4 [1022/780f] enabled [DEBUG] PCI: 00:14.5 [1022/7809] enabled [DEBUG] hudson_enable() [DEBUG] hudson_enable() [DEBUG] PCI: 00:15.0 [1022/43a0] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:15.1 [1022/43a1] enabled [DEBUG] hudson_enable() [DEBUG] PCI: 00:15.2 [1022/43a2] disabled [DEBUG] PCI: 00:16.0 [1022/7807] enabled [DEBUG] PCI: 00:16.2 [1022/7808] enabled [DEBUG] PCI: 00:18.0 [1022/1400] enabled [DEBUG] PCI: 00:18.1 [1022/1401] enabled [DEBUG] PCI: 00:18.2 [1022/1402] enabled [DEBUG] PCI: 00:18.3 [1022/1403] enabled [DEBUG] PCI: 00:18.4 [1022/1404] enabled [DEBUG] PCI: 00:18.5 [1022/1405] enabled [WARN ] PCI: Leftover static devices: [WARN ] PCI: 00:02.0 [WARN ] PCI: 00:10.0 [WARN ] PCI: 00:10.1 [WARN ] PCI: 00:14.1 [WARN ] PCI: 00:14.7 [WARN ] PCI: Check your devicetree.cb. [DEBUG] PCI: 00:14.0 scanning... [DEBUG] scan_bus: bus PCI: 00:14.0 finished in 0 msecs [DEBUG] PCI: 00:14.3 scanning... [DEBUG] PNP: 002e.0 disabled [DEBUG] PNP: 002e.1 disabled [DEBUG] PNP: 002e.2 enabled [DEBUG] PNP: 002e.3 disabled [DEBUG] PNP: 002e.5 enabled [DEBUG] PNP: 002e.6 disabled [DEBUG] PNP: 002e.7 enabled [DEBUG] PNP: 002e.8 disabled [DEBUG] PNP: 002e.108 enabled [DEBUG] PNP: 002e.9 disabled [DEBUG] PNP: 002e.109 enabled [DEBUG] PNP: 002e.209 enabled [DEBUG] PNP: 002e.309 enabled [DEBUG] PNP: 002e.409 enabled [DEBUG] PNP: 002e.509 enabled [DEBUG] PNP: 002e.609 enabled [DEBUG] PNP: 002e.709 enabled [DEBUG] PNP: 002e.a enabled [DEBUG] PNP: 002e.b enabled [DEBUG] PNP: 002e.d disabled [DEBUG] PNP: 002e.e disabled [DEBUG] PNP: 002e.f enabled [DEBUG] PNP: 002e.14 enabled [DEBUG] PNP: 002e.16 disabled [DEBUG] scan_bus: bus PCI: 00:14.3 finished in 40 msecs [DEBUG] PCI: 00:14.4 scanning... [DEBUG] PCI: pci_scan_bus for bus 01 [DEBUG] scan_bus: bus PCI: 00:14.4 finished in 2 msecs [DEBUG] PCI: 00:15.0 scanning... [DEBUG] PCI: pci_scan_bus for bus 02 [DEBUG] scan_bus: bus PCI: 00:15.0 finished in 2 msecs [DEBUG] PCI: 00:15.1 scanning... [DEBUG] PCI: pci_scan_bus for bus 03 [DEBUG] PCI: 03:00.0 [1b21/1042] enabled [DEBUG] scan_bus: bus PCI: 00:15.1 finished in 4 msecs [DEBUG] scan_bus: bus DOMAIN: 0000 finished in 174 msecs [DEBUG] scan_bus: bus Root Device finished in 182 msecs [INFO ] done [DEBUG] BS: BS_DEV_ENUMERATE run times (exec / console): 0 / 190 ms [DEBUG] found VGA at PCI: 00:01.0 [DEBUG] Setting up VGA for PCI: 00:01.0 [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge Root Device [INFO ] Allocating resources... [INFO ] Reading resources... [DEBUG] fx_devs=0x1 [ERROR] PNP: 002e.7 missing read_resources [DEBUG] Adding PCIe enhanced config space BAR 0xf8000000-0xfc000000. [INFO ] Done reading resources. [ERROR] skipping PNP: 002e.7@f4 fixed resource, size=0! [ERROR] skipping PNP: 002e.7@e0 fixed resource, size=0! [ERROR] skipping PNP: 002e.7@e1 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@e0 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@e2 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@e4 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@f0 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@f4 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@f5 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@f6 fixed resource, size=0! [ERROR] skipping PNP: 002e.108@f7 fixed resource, size=0! [ERROR] skipping PNP: 002e.209@e0 fixed resource, size=0! [ERROR] skipping PNP: 002e.309@e4 fixed resource, size=0! [ERROR] skipping PNP: 002e.309@e5 fixed resource, size=0! [ERROR] skipping PNP: 002e.409@f0 fixed resource, size=0! [ERROR] skipping PNP: 002e.a@e6 fixed resource, size=0! [ERROR] skipping PNP: 002e.a@e7 fixed resource, size=0! [ERROR] skipping PNP: 002e.b@e2 fixed resource, size=0! [ERROR] skipping PNP: 002e.b@e4 fixed resource, size=0! [ERROR] skipping PNP: 002e.f@e6 fixed resource, size=0! [ERROR] skipping PNP: 002e.14@e0 fixed resource, size=0! [INFO ] Setting resources... [DEBUG] node 0: mmio_basek=00200000, basek=00400000, limitk=005fc000 [INFO ] add_uma_resource_below_tolm: uma size 0x20000000, memory start 0x60000000 [DEBUG] PCI: 00:00.2 44 <- [0x00f0100000 - 0x00f017ffff] size 0x00080000 gran 0x13 mem [DEBUG] PCI: 00:01.0 10 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x1c prefmem [DEBUG] PCI: 00:01.0 14 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io [DEBUG] PCI: 00:01.0 18 <- [0x00f0180000 - 0x00f01bffff] size 0x00040000 gran 0x12 mem [DEBUG] PCI: 00:01.1 10 <- [0x00f01c0000 - 0x00f01c3fff] size 0x00004000 gran 0x0e mem [DEBUG] PCI: 00:11.0 10 <- [0x0000001410 - 0x0000001417] size 0x00000008 gran 0x03 io [DEBUG] PCI: 00:11.0 14 <- [0x0000001420 - 0x0000001423] size 0x00000004 gran 0x02 io [DEBUG] PCI: 00:11.0 18 <- [0x0000001418 - 0x000000141f] size 0x00000008 gran 0x03 io [DEBUG] PCI: 00:11.0 1c <- [0x0000001424 - 0x0000001427] size 0x00000004 gran 0x02 io [DEBUG] PCI: 00:11.0 20 <- [0x0000001400 - 0x000000140f] size 0x00000010 gran 0x04 io [DEBUG] PCI: 00:11.0 24 <- [0x00f01cc000 - 0x00f01cc7ff] size 0x00000800 gran 0x0b mem [DEBUG] PCI: 00:12.0 10 <- [0x00f01c8000 - 0x00f01c8fff] size 0x00001000 gran 0x0c mem [DEBUG] PCI: 00:12.2 10 <- [0x00f01cd000 - 0x00f01cd0ff] size 0x00000100 gran 0x08 mem [DEBUG] PCI: 00:13.0 10 <- [0x00f01c9000 - 0x00f01c9fff] size 0x00001000 gran 0x0c mem [DEBUG] PCI: 00:13.2 10 <- [0x00f01ce000 - 0x00f01ce0ff] size 0x00000100 gran 0x08 mem [DEBUG] PCI: 00:14.2 10 <- [0x00f01c4000 - 0x00f01c7fff] size 0x00004000 gran 0x0e mem64 [DEBUG] PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io [DEBUG] PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq [DEBUG] PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io [DEBUG] PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io [DEBUG] PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq [DEBUG] PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq [ERROR] PNP: 002e.7 missing set_resources [DEBUG] PNP: 002e.108 e0 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 e2 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 e4 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 f0 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 f4 <- [0x0000000008 - 0x0000000007] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 f5 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 f6 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.108 f7 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.209 e0 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.309 e4 <- [0x000000007f - 0x000000007e] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.309 e5 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.409 f0 <- [0x00000000ff - 0x00000000fe] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.509 f4 <- [0x00000000ff - 0x00000000ff] size 0x00000001 gran 0x00 irq [WARN ] PNP: 002e.509 f5 irq size: 0x0000000001 not assigned in devicetree [WARN ] PNP: 002e.609 f4 irq size: 0x0000000001 not assigned in devicetree [WARN ] PNP: 002e.609 f5 irq size: 0x0000000001 not assigned in devicetree [DEBUG] PNP: 002e.a e6 <- [0x000000004c - 0x000000004b] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.a e7 <- [0x0000000011 - 0x0000000010] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.a f2 <- [0x000000005d - 0x000000005d] size 0x00000001 gran 0x00 irq [DEBUG] PNP: 002e.b 60 <- [0x0000000290 - 0x0000000291] size 0x00000002 gran 0x01 io [DEBUG] PNP: 002e.b 62 <- [0x0000000000 - 0x0000000001] size 0x00000002 gran 0x01 io [DEBUG] PNP: 002e.b 70 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 io [DEBUG] PNP: 002e.b e2 <- [0x000000007f - 0x000000007e] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.b e4 <- [0x00000000f1 - 0x00000000f0] size 0x00000000 gran 0x00 irq [WARN ] PNP: 002e.b f0 irq size: 0x0000000001 not assigned in devicetree [DEBUG] PNP: 002e.f e6 <- [0x0000000007 - 0x0000000006] size 0x00000000 gran 0x00 irq [DEBUG] PNP: 002e.14 e0 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00 irq [DEBUG] PCI: 00:14.4 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io [DEBUG] PCI: 00:14.4 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 01 prefmem [DEBUG] PCI: 00:14.4 20 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 01 mem [DEBUG] PCI: 00:14.5 10 <- [0x00f01ca000 - 0x00f01cafff] size 0x00001000 gran 0x0c mem [DEBUG] PCI: 00:15.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io [DEBUG] PCI: 00:15.0 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 02 prefmem [DEBUG] PCI: 00:15.0 20 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 02 mem [DEBUG] PCI: 00:15.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io [DEBUG] PCI: 00:15.1 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 03 prefmem [DEBUG] PCI: 00:15.1 20 <- [0x00f0000000 - 0x00f00fffff] size 0x00100000 gran 0x14 bus 03 mem [DEBUG] PCI: 03:00.0 10 <- [0x00f0000000 - 0x00f0007fff] size 0x00008000 gran 0x0f mem64 [DEBUG] PCI: 00:16.0 10 <- [0x00f01cb000 - 0x00f01cbfff] size 0x00001000 gran 0x0c mem [DEBUG] PCI: 00:16.2 10 <- [0x00f01cf000 - 0x00f01cf0ff] size 0x00000100 gran 0x08 mem [INFO ] Done setting resources. [INFO ] Done allocating resources. [DEBUG] BS: BS_DEV_RESOURCES run times (exec / console): 2 / 360 ms [DEBUG] APIC 00: ** Enter AmdInitMid [00020005] [DEBUG] AmdInitMid() returned AGESA_SUCCESS [DEBUG] APIC 00: Heap in SystemMem (4) at 0x10000014 [DEBUG] APIC 00: ** Exit AmdInitMid [00020005] [DEBUG] PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing: [DEBUG] PCI_INTR_INDEX PCI_INTR_DATA [DEBUG] 0x00 INTA# : 0x1F [DEBUG] 0x01 INTB# : 0x1F [DEBUG] 0x02 INTC# : 0x1F [DEBUG] 0x03 INTD# : 0x1F [DEBUG] 0x04 INTE# : 0x1F [DEBUG] 0x05 INTF# : 0x1F [DEBUG] 0x06 INTG# : 0x1F [DEBUG] 0x07 INTH# : 0x1F [DEBUG] 0x08 Misc : 0x0A [DEBUG] 0x09 Misc0 : 0xF1 [DEBUG] 0x0A Misc1 : 0x00 [DEBUG] 0x0B Misc2 : 0x00 [DEBUG] 0x0C Ser IRQ INTA : 0x1F [DEBUG] 0x0D Ser IRQ INTB : 0x1F [DEBUG] 0x0E Ser IRQ INTC : 0x1F [DEBUG] 0x0F Ser IRQ INTD : 0x1F [DEBUG] 0x10 SCI : 0x09 [DEBUG] 0x11 SMBUS0 : 0x1F [DEBUG] 0x12 ASF : 0x1F [DEBUG] 0x13 HDA : 0x1F [DEBUG] 0x14 SD : 0x1F [DEBUG] 0x15 GEC : 0x1F [DEBUG] 0x16 PerMon : 0x1F [DEBUG] 0x20 IMC INT0 : 0x1F [DEBUG] 0x21 IMC INT1 : 0x1F [DEBUG] 0x22 IMC INT2 : 0x1F [DEBUG] 0x23 IMC INT3 : 0x1F [DEBUG] 0x24 IMC INT4 : 0x1F [DEBUG] 0x25 IMC INT5 : 0x1F [DEBUG] 0x30 Dev18.0 INTA : 0x1F [DEBUG] 0x31 Dev18.2 INTB : 0x1F [DEBUG] 0x32 Dev19.0 INTA : 0x1F [DEBUG] 0x33 Dev19.2 INTB : 0x1F [DEBUG] 0x34 Dev22.0 INTA : 0x1F [DEBUG] 0x35 Dev22.2 INTB : 0x1F [DEBUG] 0x36 Dev20.5 INTC : 0x1F [DEBUG] 0x40 IDE : 0x1F [DEBUG] 0x41 SATA : 0x1F [DEBUG] 0x50 GPPInt0 : 0x1F [DEBUG] 0x51 GPPInt1 : 0x1F [DEBUG] 0x52 GPPInt2 : 0x1F [DEBUG] 0x53 GPPInt3 : 0x1F [DEBUG] PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing: [DEBUG] PCI_INTR_INDEX PCI_INTR_DATA [DEBUG] 0x00 INTA# : 0x10 [DEBUG] 0x01 INTB# : 0x11 [DEBUG] 0x02 INTC# : 0x12 [DEBUG] 0x03 INTD# : 0x13 [DEBUG] 0x04 INTE# : 0x14 [DEBUG] 0x05 INTF# : 0x15 [DEBUG] 0x06 INTG# : 0x16 [DEBUG] 0x07 INTH# : 0x17 [DEBUG] 0x08 Misc : 0x00 [DEBUG] 0x09 Misc0 : 0x00 [DEBUG] 0x0A Misc1 : 0x00 [DEBUG] 0x0B Misc2 : 0x00 [DEBUG] 0x0C Ser IRQ INTA : 0x1F [DEBUG] 0x0D Ser IRQ INTB : 0x1F [DEBUG] 0x0E Ser IRQ INTC : 0x1F [DEBUG] 0x0F Ser IRQ INTD : 0x1F [DEBUG] 0x10 SCI : 0x09 [DEBUG] 0x11 SMBUS0 : 0x1F [DEBUG] 0x12 ASF : 0x1F [DEBUG] 0x13 HDA : 0x10 [DEBUG] 0x14 SD : 0x1F [DEBUG] 0x15 GEC : 0x10 [DEBUG] 0x16 PerMon : 0x1F [DEBUG] 0x20 IMC INT0 : 0x05 [DEBUG] 0x21 IMC INT1 : 0x1F [DEBUG] 0x22 IMC INT2 : 0x1F [DEBUG] 0x23 IMC INT3 : 0x1F [DEBUG] 0x24 IMC INT4 : 0x1F [DEBUG] 0x25 IMC INT5 : 0x1F [DEBUG] 0x30 Dev18.0 INTA : 0x12 [DEBUG] 0x31 Dev18.2 INTB : 0x11 [DEBUG] 0x32 Dev19.0 INTA : 0x12 [DEBUG] 0x33 Dev19.2 INTB : 0x11 [DEBUG] 0x34 Dev22.0 INTA : 0x12 [DEBUG] 0x35 Dev22.2 INTB : 0x11 [DEBUG] 0x36 Dev20.5 INTC : 0x12 [DEBUG] 0x40 IDE : 0x11 [DEBUG] 0x41 SATA : 0x13 [DEBUG] 0x50 GPPInt0 : 0x10 [DEBUG] 0x51 GPPInt1 : 0x11 [DEBUG] 0x52 GPPInt2 : 0x12 [DEBUG] 0x53 GPPInt3 : 0x13 [WARN ] Can't write PCI IRQ assignments because 'mainboard_pirq_data' structure does not exist [DEBUG] BS: BS_DEV_ENABLE entry times (exec / console): 5 / 172 ms [INFO ] Enabling resources... [DEBUG] PCI: 00:00.0 subsystem <- 1022/1410 [DEBUG] PCI: 00:00.0 cmd <- 06 [DEBUG] PCI: 00:00.2 cmd <- 06 [DEBUG] PCI: 00:01.0 cmd <- 07 [DEBUG] PCI: 00:01.1 cmd <- 02 [DEBUG] PCI: 00:11.0 cmd <- 03 [DEBUG] PCI: 00:12.0 subsystem <- 1022/1410 [DEBUG] PCI: 00:12.0 cmd <- 02 [DEBUG] PCI: 00:12.2 subsystem <- 1022/1410 [DEBUG] PCI: 00:12.2 cmd <- 02 [DEBUG] PCI: 00:13.0 subsystem <- 1022/1410 [DEBUG] PCI: 00:13.0 cmd <- 02 [DEBUG] PCI: 00:13.2 subsystem <- 1022/1410 [DEBUG] PCI: 00:13.2 cmd <- 02 [DEBUG] PCI: 00:14.0 subsystem <- 1022/1410 [DEBUG] PCI: 00:14.0 cmd <- 403 [DEBUG] PCI: 00:14.2 subsystem <- 1022/1410 [DEBUG] PCI: 00:14.2 cmd <- 02 [DEBUG] PCI: 00:14.3 subsystem <- 1022/1410 [DEBUG] PCI: 00:14.3 cmd <- 0f [DEBUG] hudson lpc decode:PNP: 002e.2, base=0x000003f8, end=0x000003ff [DEBUG] hudson lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060 [DEBUG] hudson lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064 [DEBUG] hudson lpc decode:PNP: 002e.b, base=0x00000290, end=0x00000291 [DEBUG] PCI: 00:14.4 bridge ctrl <- 0013 [DEBUG] PCI: 00:14.4 cmd <- 00 [DEBUG] PCI: 00:14.5 cmd <- 02 [DEBUG] PCI: 00:15.0 bridge ctrl <- 0013 [DEBUG] PCI: 00:15.0 cmd <- 00 [DEBUG] PCI: 00:15.1 bridge ctrl <- 0013 [DEBUG] PCI: 00:15.1 cmd <- 06 [DEBUG] PCI: 00:16.0 cmd <- 02 [DEBUG] PCI: 00:16.2 cmd <- 02 [DEBUG] PCI: 00:18.0 cmd <- 00 [DEBUG] PCI: 00:18.1 subsystem <- 1022/1410 [DEBUG] PCI: 00:18.1 cmd <- 00 [DEBUG] PCI: 00:18.2 subsystem <- 1022/1410 [DEBUG] PCI: 00:18.2 cmd <- 00 [DEBUG] PCI: 00:18.3 subsystem <- 1022/1410 [DEBUG] PCI: 00:18.3 cmd <- 00 [DEBUG] PCI: 00:18.4 subsystem <- 1022/1410 [DEBUG] PCI: 00:18.4 cmd <- 00 [DEBUG] PCI: 00:18.5 subsystem <- 1022/1410 [DEBUG] PCI: 00:18.5 cmd <- 00 [DEBUG] PCI: 03:00.0 cmd <- 02 [INFO ] done. [DEBUG] BS: BS_DEV_ENABLE run times (exec / console): 0 / 98 ms [INFO ] Initializing devices... [DEBUG] CPU_CLUSTER: 0 init [INFO ] CPU: AMD A6-6400K APU with Radeon(tm) HD Graphics . [INFO ] LAPIC 0x10 in XAPIC mode. [DEBUG] Loading module at 0x00030000 with entry 0x00030000. filesize: 0x1b8 memsize: 0x1b8 [DEBUG] Processing 18 relocs. Offset value of 0x00030000 [DEBUG] Attempting to start 1 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [INFO ] LAPIC 0x11 in XAPIC mode. [DEBUG] done. [INFO ] AP: slot 1 apic_id 11 [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [INFO ] Initializing CPU #0 [DEBUG] CPU: vendor AMD device 610f31 [DEBUG] CPU: family 15, model 13, stepping 01 [DEBUG] Model 15 Init. [DEBUG] siblings = 01, CPU #0 initialized [INFO ] Initializing CPU #1 [DEBUG] CPU: vendor AMD device 610f31 [DEBUG] CPU: family 15, model 13, stepping 01 [DEBUG] Model 15 Init. [DEBUG] siblings = 01, CPU #1 initialized [INFO ] bsp_do_flight_plan done after 19 msecs. [DEBUG] CPU_CLUSTER: 0 init finished in 58 msecs [DEBUG] PCI: 00:00.0 init [DEBUG] PCI: 00:00.0 init finished in 0 msecs [DEBUG] PCI: 00:01.0 init [DEBUG] PCI: 00:01.0 init finished in 0 msecs [DEBUG] PCI: 00:01.1 init [DEBUG] PCI: 00:01.1 init finished in 0 msecs [DEBUG] PCI: 00:11.0 init [DEBUG] PCI: 00:11.0 init finished in 0 msecs [DEBUG] PCI: 00:12.0 init [DEBUG] PCI: 00:12.0 init finished in 0 msecs [DEBUG] PCI: 00:12.2 init [DEBUG] PCI: 00:12.2 init finished in 0 msecs [DEBUG] PCI: 00:13.0 init [DEBUG] PCI: 00:13.0 init finished in 0 msecs [DEBUG] PCI: 00:13.2 init [DEBUG] PCI: 00:13.2 init finished in 0 msecs [DEBUG] PCI: 00:14.0 init [DEBUG] IOAPIC: Initializing IOAPIC at 0xfec00000 [DEBUG] IOAPIC: ID = 0x04 [DEBUG] IOAPIC: 24 interrupts [DEBUG] IOAPIC: Clearing IOAPIC at 0xfec00000 [DEBUG] IOAPIC: Bootstrap Processor Local APIC = 0x10 [DEBUG] PCI: 00:14.0 init finished in 11 msecs [DEBUG] PCI: 00:14.2 init [DEBUG] PCI: 00:14.2 init finished in 0 msecs [DEBUG] PCI: 00:14.3 init [DEBUG] RTC Init [DEBUG] PCI: 00:14.3 init finished in 1 msecs [DEBUG] PCI: 00:14.5 init [DEBUG] PCI: 00:14.5 init finished in 0 msecs [DEBUG] PCI: 00:15.0 init [DEBUG] PCI: 00:15.0 init finished in 0 msecs [DEBUG] PCI: 00:15.1 init [DEBUG] PCI: 00:15.1 init finished in 0 msecs [DEBUG] PCI: 00:16.0 init [DEBUG] PCI: 00:16.0 init finished in 0 msecs [DEBUG] PCI: 00:16.2 init [DEBUG] PCI: 00:16.2 init finished in 0 msecs [DEBUG] PCI: 00:18.1 init [DEBUG] PCI: 00:18.1 init finished in 0 msecs [DEBUG] PCI: 00:18.2 init [DEBUG] PCI: 00:18.2 init finished in 0 msecs [DEBUG] PCI: 00:18.3 init [DEBUG] PCI: 00:18.3 init finished in 0 msecs [DEBUG] PCI: 00:18.4 init [DEBUG] PCI: 00:18.4 init finished in 0 msecs [DEBUG] PCI: 00:18.5 init [DEBUG] PCI: 00:18.5 init finished in 0 msecs [DEBUG] PNP: 002e.2 init [DEBUG] PNP: 002e.2 init finished in 0 msecs [DEBUG] PNP: 002e.5 init [DEBUG] PNP: 002e.5 init finished in 0 msecs [DEBUG] PNP: 002e.108 init [DEBUG] PNP: 002e.108 init finished in 0 msecs [DEBUG] PNP: 002e.109 init [DEBUG] PNP: 002e.109 init finished in 0 msecs [DEBUG] PNP: 002e.209 init [DEBUG] PNP: 002e.209 init finished in 0 msecs [DEBUG] PNP: 002e.309 init [DEBUG] PNP: 002e.309 init finished in 0 msecs [DEBUG] PNP: 002e.409 init [DEBUG] PNP: 002e.409 init finished in 0 msecs [DEBUG] PNP: 002e.509 init [DEBUG] PNP: 002e.509 init finished in 0 msecs [DEBUG] PNP: 002e.609 init [DEBUG] PNP: 002e.609 init finished in 0 msecs [DEBUG] PNP: 002e.709 init [DEBUG] PNP: 002e.709 init finished in 0 msecs [DEBUG] PNP: 002e.a init [DEBUG] PNP: 002e.a init finished in 0 msecs [DEBUG] PNP: 002e.b init [DEBUG] PNP: 002e.b init finished in 0 msecs [DEBUG] PNP: 002e.f init [DEBUG] PNP: 002e.f init finished in 0 msecs [DEBUG] PNP: 002e.14 init [DEBUG] PNP: 002e.14 init finished in 0 msecs [DEBUG] PCI: 03:00.0 init [DEBUG] PCI: 03:00.0 init finished in 0 msecs [INFO ] Devices initialized [DEBUG] BS: BS_DEV_INIT run times (exec / console): 24 / 199 ms [INFO ] Finalize devices... [DEBUG] PCI: 00:14.3 final [INFO ] Devices finalized [DEBUG] BS: BS_POST_DEVICE run times (exec / console): 0 / 5 ms [DEBUG] APIC 00: ** Enter AmdInitLate [00020004] [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/Common/CommonReturns.c', line 187 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuGeneralServices.c', line 776 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/Common/CommonReturns.c', line 187 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuGeneralServices.c', line 776 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/Common/CommonReturns.c', line 187 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuGeneralServices.c', line 776 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/Common/CommonReturns.c', line 187 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuGeneralServices.c', line 776 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/Common/CommonReturns.c', line 187 [EMERG] ASSERTION ERROR: file 'src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuGeneralServices.c', line 776 [DEBUG] AmdInitLate() returned AGESA_SUCCESS [DEBUG] APIC 00: Heap in SystemMem (4) at 0x10000014 [DEBUG] APIC 00: ** Exit AmdInitLate [00020004] [DEBUG] APIC 00: ** Enter AmdS3Save [0002000b] [DEBUG] FMAP: area COREBOOT found @ 10200 (16711168 bytes) [INFO ] CBFS: Found 'pci1002,9996.rom' @0x90cc0 size 0xf200 in mcache @0x5fffeb60 [DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (65536 bytes) [DEBUG] MRC: Checking cached data update for 'RW_MRC_CACHE'. [INFO ] Manufacturer: ef [INFO ] SF: Detected ef 4018 with sector size 0x1000, total 0x1000000 [NOTE ] MRC: no data in 'RW_MRC_CACHE' [DEBUG] MRC: cache data 'RW_MRC_CACHE' needs update. [DEBUG] MRC: updated 'RW_MRC_CACHE'. [DEBUG] AmdS3Save() returned AGESA_SUCCESS [EMERG] ASSERTION ERROR: file 'src/drivers/amd/agesa/state_machine.c', line 278 [DEBUG] APIC 00: Heap in SystemMem (4) at 0x10000014 [DEBUG] APIC 00: ** Exit AmdS3Save [0002000b] [DEBUG] BS: BS_POST_DEVICE exit times (exec / console): 14 / 101 ms [INFO ] Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done. [INFO ] Writing IRQ routing tables to 0x5fe6e000...write_pirq_routing_table done. [DEBUG] PIRQ table: 48 bytes. [INFO ] CBFS: Found 'fallback/dsdt.aml' @0x6c0 size 0x193a in mcache @0x5fffe9b4 [WARN ] CBFS: 'fallback/slic' not found. [INFO ] ACPI: Writing ACPI tables at 5fe4a000. [DEBUG] ACPI: * FACS [DEBUG] ACPI: * DSDT [DEBUG] ACPI: * FADT [DEBUG] pm_base: 0x0800 [DEBUG] ACPI: added table 1/32, length now 40 [DEBUG] ACPI: * SSDT [INFO ] CBFS: Found 'pci1002,9996.rom' @0x90cc0 size 0xf200 in mcache @0x5fffeb60 [DEBUG] In CBFS, ROM address for PCI: 00:01.0 = 0xff0a0eec [ERROR] PCI: 00:01.0: Missing ACPI scope [DEBUG] ACPI: added table 2/32, length now 44 [DEBUG] ACPI: * MCFG [DEBUG] ACPI: added table 3/32, length now 48 [DEBUG] ACPI: * MADT [DEBUG] ACPI: added table 4/32, length now 52 [DEBUG] current = 5fe4be20 [DEBUG] ACPI: * HPET [DEBUG] ACPI: added table 5/32, length now 56 [DEBUG] ACPI: added table 6/32, length now 60 [DEBUG] ACPI: * IVRS at 5fe4c030 [DEBUG] ACPI: added table 7/32, length now 64 [DEBUG] ACPI: * SRAT at 5fe4c0a0 [DEBUG] AGESA SRAT table NULL. Skipping. [DEBUG] ACPI: * SLIT at 5fe4c0a0 [DEBUG] AGESA SLIT table NULL. Skipping. [DEBUG] ACPI: * AGESA ALIB SSDT at 5fe4c0a0 [DEBUG] ACPI: added table 8/32, length now 68 [DEBUG] ACPI: * SSDT at 5fe4c5c0 [DEBUG] ACPI: added table 9/32, length now 72 [DEBUG] ACPI: * SSDT for PState at 5fe4cc72 [INFO ] CBFS: Found 'pci1002,9996.rom' @0x90cc0 size 0xf200 in mcache @0x5fffeb60 [DEBUG] In CBFS, ROM address for PCI: 00:01.0 = 0xff0a0eec [DEBUG] Copying VBIOS image from 0xff0a0eec [DEBUG] ACPI: * VFCT at 5fe4cc80 [DEBUG] ACPI: added table 10/32, length now 76 [INFO ] ACPI: done. [DEBUG] ACPI tables: 73456 bytes. [DEBUG] smbios_write_tables: 5fe42000 [DEBUG] SMBIOS firmware version is set to coreboot_version: '4.17-92-geb5af81a0d' [DEBUG] SMBIOS tables: 531 bytes. [DEBUG] Writing table forward entry at 0x00000500 [DEBUG] Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum aff7 [DEBUG] Writing coreboot table at 0x5fe6f000 [DEBUG] 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES [DEBUG] 1. 0000000000001000-000000000009ffff: RAM [DEBUG] 2. 00000000000c0000-000000005fe41fff: RAM [DEBUG] 3. 000000005fe42000-000000005feb7fff: CONFIGURATION TABLES [DEBUG] 4. 000000005feb8000-000000005ffd0fff: RAMSTAGE [DEBUG] 5. 000000005ffd1000-000000005fffffff: CONFIGURATION TABLES [DEBUG] 6. 0000000060000000-000000007fffffff: RESERVED [DEBUG] 7. 00000000f8000000-00000000fbffffff: RESERVED [DEBUG] 8. 0000000100000000-000000017effffff: RAM [DEBUG] Wrote coreboot table at: 0x5fe6f000, 0x36c bytes, checksum 940d [DEBUG] coreboot table: 900 bytes. [DEBUG] IMD ROOT 0. 0x5ffff000 0x00001000 [DEBUG] IMD SMALL 1. 0x5fffe000 0x00001000 [DEBUG] CONSOLE 2. 0x5ffde000 0x00020000 [DEBUG] TIME STAMP 3. 0x5ffdd000 0x00000910 [DEBUG] AFTER CAR 4. 0x5ffd1000 0x0000c000 [DEBUG] RAMSTAGE 5. 0x5feb7000 0x0011a000 [DEBUG] SMM BACKUP 6. 0x5fea7000 0x00010000 [DEBUG] ACPISCRATCH 7. 0x5fe77000 0x00030000 [DEBUG] COREBOOT 8. 0x5fe6f000 0x00008000 [DEBUG] IRQ TABLE 9. 0x5fe6e000 0x00001000 [DEBUG] ACPI 10. 0x5fe4a000 0x00024000 [DEBUG] SMBIOS 11. 0x5fe42000 0x00008000 [DEBUG] IMD small region: [DEBUG] IMD ROOT 0. 0x5fffec00 0x00000400 [DEBUG] RO MCACHE 1. 0x5fffe920 0x000002dc [DEBUG] FMAP 2. 0x5fffe840 0x000000e0 [DEBUG] ROMSTAGE 3. 0x5fffe820 0x00000004 [DEBUG] ROMSTG STCK 4. 0x5fffe780 0x00000088 [DEBUG] AGESA MTRR 5. 0x5fffe680 0x000000f0 [DEBUG] BS: BS_WRITE_TABLES run times (exec / console): 9 / 191 ms [INFO ] CBFS: Found 'fallback/payload' @0x9ff00 size 0xbeb2bf in mcache @0x5fffeb8c [DEBUG] Checking segment from ROM address 0xff0b012c [DEBUG] Checking segment from ROM address 0xff0b0148 [DEBUG] Checking segment from ROM address 0xff0b0164 [DEBUG] Checking segment from ROM address 0xff0b0180 [DEBUG] Checking segment from ROM address 0xff0b019c [DEBUG] Loading segment from ROM address 0xff0b012c [DEBUG] data (compression=0) [DEBUG] New segment dstaddr 0x00090000 memsize 0x1080 srcaddr 0xff0b01b8 filesize 0x1080 [DEBUG] Loading Segment: addr: 0x00090000 memsz: 0x0000000000001080 filesz: 0x0000000000001080 [DEBUG] it's not compressed! [DEBUG] Loading segment from ROM address 0xff0b0148 [DEBUG] code (compression=0) [DEBUG] New segment dstaddr 0x01000000 memsize 0xbea080 srcaddr 0xff0b1238 filesize 0xbea080 [DEBUG] Loading Segment: addr: 0x01000000 memsz: 0x0000000000bea080 filesz: 0x0000000000bea080 [DEBUG] it's not compressed! [DEBUG] Loading segment from ROM address 0xff0b0164 [DEBUG] code (compression=0) [DEBUG] New segment dstaddr 0x00040000 memsize 0xef srcaddr 0xffc9b2b8 filesize 0xef [DEBUG] Loading Segment: addr: 0x00040000 memsz: 0x00000000000000ef filesz: 0x00000000000000ef [DEBUG] it's not compressed! [DEBUG] Loading segment from ROM address 0xff0b0180 [DEBUG] data (compression=0) [DEBUG] New segment dstaddr 0x00091000 memsize 0x44 srcaddr 0xffc9b3a7 filesize 0x44 [DEBUG] Loading Segment: addr: 0x00091000 memsz: 0x0000000000000044 filesz: 0x0000000000000044 [DEBUG] it's not compressed! [DEBUG] Loading segment from ROM address 0xff0b019c [DEBUG] Entry Point 0x00040000 [DEBUG] BS: BS_PAYLOAD_LOAD run times (exec / console): 1699 / 82 ms [DEBUG] Jumping to boot code at 0x00040000(0x5fe6f000) [ 0.000000] Linux version 5.19.0-rc1 (root@4beb429beb4a) (gcc (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #371 SMP PREEMPT_DYNAMIC Fri Jun 10 06:59:32 UTC 2022 [ 0.000000] Command line: earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8 root=/dev/sda3 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000005fe41fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005fe42000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable [ 0.000000] printk: console [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.17-92-geb5af81a0d 06/08/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Initial usec timer 7890635 [ 0.000000] tsc: Detected 3900.431 MHz processor [ 0.000106] last_pfn = 0x17f000 max_arch_pfn = 0x400000000 [ 0.005593] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Memory KASLR using RDTSC... [ 0.015053] last_pfn = 0x5fe42 max_arch_pfn = 0x400000000 [ 0.024547] Using GB pages for direct mapping [ 0.028878] ACPI: Early table checksum verification disabled [ 0.034364] ACPI: RSDP 0x000000005FE4A000 000024 (v02 COREv4) [ 0.040082] ACPI: XSDT 0x000000005FE4A0E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.048577] ACPI: FACP 0x000000005FE4BBC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.057069] ACPI: DSDT 0x000000005FE4A280 00193A (v02 COREv4 COREBOOT 00010001 INTL 20200925) [ 0.065560] ACPI: FACS 0x000000005FE4A240 000040 [ 0.070154] ACPI: FACS 0x000000005FE4A240 000040 [ 0.074747] ACPI: SSDT 0x000000005FE4BCE0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20200925) [ 0.083240] ACPI: MCFG 0x000000005FE4BD70 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.091733] ACPI: APIC 0x000000005FE4BDB0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.100226] ACPI: HPET 0x000000005FE4BE20 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.108719] ACPI: HEST 0x000000005FE4BE60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.117212] ACPI: IVRS 0x000000005FE4C030 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) [ 0.125704] ACPI: SSDT 0x000000005FE4C0A0 00051F (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.134198] ACPI: SSDT 0x000000005FE4C5C0 0006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.142690] ACPI: VFCT 0x000000005FE4CC80 00F269 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.151183] ACPI: Reserving FACP table memory at [mem 0x5fe4bbc0-0x5fe4bcd3] [ 0.158203] ACPI: Reserving DSDT table memory at [mem 0x5fe4a280-0x5fe4bbb9] [ 0.165222] ACPI: Reserving FACS table memory at [mem 0x5fe4a240-0x5fe4a27f] [ 0.172242] ACPI: Reserving FACS table memory at [mem 0x5fe4a240-0x5fe4a27f] [ 0.179262] ACPI: Reserving SSDT table memory at [mem 0x5fe4bce0-0x5fe4bd69] [ 0.186281] ACPI: Reserving MCFG table memory at [mem 0x5fe4bd70-0x5fe4bdab] [ 0.193301] ACPI: Reserving APIC table memory at [mem 0x5fe4bdb0-0x5fe4be11] [ 0.200321] ACPI: Reserving HPET table memory at [mem 0x5fe4be20-0x5fe4be57] [ 0.207341] ACPI: Reserving HEST table memory at [mem 0x5fe4be60-0x5fe4c02f] [ 0.214360] ACPI: Reserving IVRS table memory at [mem 0x5fe4c030-0x5fe4c09f] [ 0.221380] ACPI: Reserving SSDT table memory at [mem 0x5fe4c0a0-0x5fe4c5be] [ 0.228400] ACPI: Reserving SSDT table memory at [mem 0x5fe4c5c0-0x5fe4cc71] [ 0.235419] ACPI: Reserving VFCT table memory at [mem 0x5fe4cc80-0x5fe5bee8] [ 0.242496] No NUMA configuration found [ 0.246252] Faking a node at [mem 0x0000000000000000-0x000000017effffff] [ 0.252930] NODE_DATA(0) allocated [mem 0x17efe7000-0x17effdfff] [ 0.270911] Zone ranges: [ 0.273274] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.279426] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.285579] Normal [mem 0x0000000100000000-0x000000017effffff] [ 0.291733] Device empty [ 0.294593] Movable zone start for each node [ 0.298841] Early memory node ranges [ 0.302392] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.308633] node 0: [mem 0x0000000000100000-0x000000005fe41fff] [ 0.314872] node 0: [mem 0x0000000100000000-0x000000017effffff] [ 0.321113] Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff] [ 0.328137] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.328193] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.346489] On node 0, zone Normal: 446 pages in unavailable ranges [ 0.352297] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.358593] ACPI: PM-Timer IO Port: 0x818 [ 0.368791] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.374685] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.381526] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.387852] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.394354] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.400764] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.405881] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.410817] smpboot: smpboot: XXX end of prefill_possible_map [ 0.416536] After prefill_possible_map [ 0.420263] After init_cpu_to_node [ 0.423643] After init_gi_nodes [ 0.426764] After io_apic_init_mappings [ 0.430576] After x86_init.hyper.guest_late_init [ 0.435178] [mem 0x80000000-0xf7ffffff] available for PCI devices [ 0.441235] After e820 [ 0.443577] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.457964] After unwind_init [ 0.460761] After setup_arch [ 0.463631] After setup_command_line [ 0.467174] After setup_nr_cpu_ids [ 0.470554] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.478551] percpu: Embedded 54 pages/cpu s183656 r8192 d29336 u1048576 [ 0.485027] After setup_per_cpu_areas [ 0.488623] After smp_perpare_boot_cpu [ 0.492350] After boot_cpu_hotplug_init [ 0.496165] Fallback order for Node 0: 0 [ 0.500150] Built 1 zonelists, mobility grouping on. Total pages: 898440 [ 0.506909] Policy zone: Normal [ 0.510030] Kernel command line: earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8 root=/dev/sda3 [ 0.519950] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.528076] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.535665] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.582249] Memory: 3483276K/3651460K available (14343K kernel code, 2321K rwdata, 4376K rodata, 1728K init, 6252K bss, 167924K reserved, 0K cma-reserved) [ 0.596458] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.602847] After mm_init [ 0.605401] ftrace: allocating 35607 entries in 140 pages [ 0.617979] ftrace: allocated 140 pages with 3 groups [ 0.622989] Dynamic Preempt: full [ 0.626149] After sched_init [ 0.629092] rcu: Preemptible hierarchical RCU implementation. [ 0.634729] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. [ 0.641315] Trampoline variant of Tasks RCU enabled. [ 0.646341] Rude variant of Tasks RCU enabled. [ 0.650848] Tracing variant of Tasks RCU enabled. [ 0.655614] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.663154] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.669841] After rcu_init [ 0.682654] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16 [ 0.688569] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.695284] After random_init(command_line) [ 0.699424] After boot_init_stack_canary [ 0.703583] Console: colour VGA+ 80x25 [ 0.000000] Linux version 5.19.0-rc1 (root@4beb429beb4a) (gcc (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #371 SMP PREEMPT_DYNAMIC Fri Jun 10 06:59:32 UTC 2022 [ 0.000000] Command line: earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8 root=/dev/sda3 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000005fe41fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005fe42000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable [ 0.000000] printk: console [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.17-92-geb5af81a0d 06/08/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Initial usec timer 7890635 [ 0.000000] tsc: Detected 3900.431 MHz processor [ 0.000106] last_pfn = 0x17f000 max_arch_pfn = 0x400000000 [ 0.005593] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.015053] last_pfn = 0x5fe42 max_arch_pfn = 0x400000000 [ 0.024547] Using GB pages for direct mapping [ 0.028878] ACPI: Early table checksum verification disabled [ 0.034364] ACPI: RSDP 0x000000005FE4A000 000024 (v02 COREv4) [ 0.040082] ACPI: XSDT 0x000000005FE4A0E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.048577] ACPI: FACP 0x000000005FE4BBC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.057069] ACPI: DSDT 0x000000005FE4A280 00193A (v02 COREv4 COREBOOT 00010001 INTL 20200925) [ 0.065560] ACPI: FACS 0x000000005FE4A240 000040 [ 0.070154] ACPI: FACS 0x000000005FE4A240 000040 [ 0.074747] ACPI: SSDT 0x000000005FE4BCE0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20200925) [ 0.083240] ACPI: MCFG 0x000000005FE4BD70 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.091733] ACPI: APIC 0x000000005FE4BDB0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.100226] ACPI: HPET 0x000000005FE4BE20 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.108719] ACPI: HEST 0x000000005FE4BE60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.117212] ACPI: IVRS 0x000000005FE4C030 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) [ 0.125704] ACPI: SSDT 0x000000005FE4C0A0 00051F (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.134198] ACPI: SSDT 0x000000005FE4C5C0 0006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.142690] ACPI: VFCT 0x000000005FE4CC80 00F269 (v01 COREv4 COREBOOT 00000000 CORE 20200925) [ 0.151183] ACPI: Reserving FACP table memory at [mem 0x5fe4bbc0-0x5fe4bcd3] [ 0.158203] ACPI: Reserving DSDT table memory at [mem 0x5fe4a280-0x5fe4bbb9] [ 0.165222] ACPI: Reserving FACS table memory at [mem 0x5fe4a240-0x5fe4a27f] [ 0.172242] ACPI: Reserving FACS table memory at [mem 0x5fe4a240-0x5fe4a27f] [ 0.179262] ACPI: Reserving SSDT table memory at [mem 0x5fe4bce0-0x5fe4bd69] [ 0.186281] ACPI: Reserving MCFG table memory at [mem 0x5fe4bd70-0x5fe4bdab] [ 0.193301] ACPI: Reserving APIC table memory at [mem 0x5fe4bdb0-0x5fe4be11] [ 0.200321] ACPI: Reserving HPET table memory at [mem 0x5fe4be20-0x5fe4be57] [ 0.207341] ACPI: Reserving HEST table memory at [mem 0x5fe4be60-0x5fe4c02f] [ 0.214360] ACPI: Reserving IVRS table memory at [mem 0x5fe4c030-0x5fe4c09f] [ 0.221380] ACPI: Reserving SSDT table memory at [mem 0x5fe4c0a0-0x5fe4c5be] [ 0.228400] ACPI: Reserving SSDT table memory at [mem 0x5fe4c5c0-0x5fe4cc71] [ 0.235419] ACPI: Reserving VFCT table memory at [mem 0x5fe4cc80-0x5fe5bee8] [ 0.242496] No NUMA configuration found [ 0.246252] Faking a node at [mem 0x0000000000000000-0x000000017effffff] [ 0.252930] NODE_DATA(0) allocated [mem 0x17efe7000-0x17effdfff] [ 0.270911] Zone ranges: [ 0.273274] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.279426] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.285579] Normal [mem 0x0000000100000000-0x000000017effffff] [ 0.291733] Device empty [ 0.294593] Movable zone start for each node [ 0.298841] Early memory node ranges [ 0.302392] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.308633] node 0: [mem 0x0000000000100000-0x000000005fe41fff] [ 0.314872] node 0: [mem 0x0000000100000000-0x000000017effffff] [ 0.321113] Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff] [ 0.328137] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.328193] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.346489] On node 0, zone Normal: 446 pages in unavailable ranges [ 0.352297] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.358593] ACPI: PM-Timer IO Port: 0x818 [ 0.368791] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.374685] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.381526] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.387852] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.394354] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.400764] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.405881] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.410817] smpboot: smpboot: XXX end of prefill_possible_map [ 0.416536] After prefill_possible_map [ 0.420263] After init_cpu_to_node [ 0.423643] After init_gi_nodes [ 0.426764] After io_apic_init_mappings [ 0.430576] After x86_init.hyper.guest_late_init [ 0.435178] [mem 0x80000000-0xf7ffffff] available for PCI devices [ 0.441235] After e820 [ 0.443577] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.457964] After unwind_init [ 0.460761] After setup_arch [ 0.463631] After setup_command_line [ 0.467174] After setup_nr_cpu_ids [ 0.470554] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.478551] percpu: Embedded 54 pages/cpu s183656 r8192 d29336 u1048576 [ 0.485027] After setup_per_cpu_areas [ 0.488623] After smp_perpare_boot_cpu [ 0.492350] After boot_cpu_hotplug_init [ 0.496165] Fallback order for Node 0: 0 [ 0.500150] Built 1 zonelists, mobility grouping on. Total pages: 898440 [ 0.506909] Policy zone: Normal [ 0.510030] Kernel command line: earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8 root=/dev/sda3 [ 0.519950] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.528076] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.535665] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.582249] Memory: 3483276K/3651460K available (14343K kernel code, 2321K rwdata, 4376K rodata, 1728K init, 6252K bss, 167924K reserved, 0K cma-reserved) [ 0.596458] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.602847] After mm_init [ 0.605401] ftrace: allocating 35607 entries in 140 pages [ 0.617979] ftrace: allocated 140 pages with 3 groups [ 0.622989] Dynamic Preempt: full [ 0.626149] After sched_init [ 0.629092] rcu: Preemptible hierarchical RCU implementation. [ 0.634729] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. [ 0.641315] Trampoline variant of Tasks RCU enabled. [ 0.646341] Rude variant of Tasks RCU enabled. [ 0.650848] Tracing variant of Tasks RCU enabled. [ 0.655614] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.663154] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.669841] After rcu_init [ 0.682654] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16 [ 0.688569] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.695284] After random_init(command_line) [ 0.699424] After boot_init_stack_canary [ 0.703583] Console: colour VGA+ 80x25 [ 1.465540] printk: console [ttyS0] enabled [ 1.465540] printk: console [ttyS0] enabled [ 1.473771] ACPI: Core revision 20220331 [ 1.473771] ACPI: Core revision 20220331 [ 1.481780] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 1.481780] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 1.499856] APIC: Switch to symmetric I/O mode setup [ 1.499856] APIC: Switch to symmetric I/O mode setup [ 1.544231] APIC: Done [ 1.544231] APIC: Done [ 1.548788] Before apic_bsb_setup [ 1.548788] Before apic_bsb_setup [ 1.555770] check_timer begin [ 1.555770] check_timer begin [ 1.561530] check_timer after local_irq_disable [ 1.561530] check_timer after local_irq_disable [ 1.570684] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.570684] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.599849] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x7071e57de24, max_idle_ns: 881590877275 ns [ 1.599849] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x7071e57de24, max_idle_ns: 881590877275 ns [ 1.620696] Calibrating delay loop (skipped), value calculated using timer frequency.. 7800.86 BogoMIPS (lpj=15601724) [ 1.620696] Calibrating delay loop (skipped), value calculated using timer frequency.. 7800.86 BogoMIPS (lpj=15601724) [ 1.628691] pid_max: default: 32768 minimum: 301 [ 1.628691] pid_max: default: 32768 minimum: 301 [ 1.636839] LSM: Security Framework initializing [ 1.636839] LSM: Security Framework initializing [ 1.644728] SELinux: Initializing. [ 1.644728] SELinux: Initializing. [ 1.652003] SELinux: CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is non-zero. This is deprecated and will be rejected in a future kernel release. [ 1.652003] SELinux: CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is non-zero. This is deprecated and will be rejected in a future kernel release. [ 1.656691] SELinux: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-checkreqprot [ 1.656691] SELinux: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-checkreqprot [ 1.664912] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.664912] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.672706] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.672706] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) Poking KASLR using RDTSC... [ 1.685400] Bit 30 in CPUID ECX not set. [ 1.685400] Bit 30 in CPUID ECX not set. [ 1.685432] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 1.685432] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 1.700691] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 1.700691] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 1.708698] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.708698] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.716692] Spectre V2 : Mitigation: Retpolines [ 1.716692] Spectre V2 : Mitigation: Retpolines [ 1.724691] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.724691] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.732692] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.732692] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.740691] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.740691] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.749695] Freeing SMP alternatives memory: 40K [ 1.749695] Freeing SMP alternatives memory: 40K [ 1.756692] After check_bugs [ 1.756692] After check_bugs [ 1.764692] After acpi_subsystem_init [ 1.764692] After acpi_subsystem_init [ 1.772691] After arch_post_acpi_subsys_init [ 1.772691] After arch_post_acpi_subsys_init [ 1.780692] After rcu_scheduler_starting [ 1.780692] After rcu_scheduler_starting [ 1.788791] After find_task_by_pid_ns and PF_NO_SETAFFINITY [ 1.788791] After find_task_by_pid_ns and PF_NO_SETAFFINITY [ 1.796697] After numa_default_policy [ 1.796697] After numa_default_policy [ 1.804210] After rcu_read_lock [ 1.804210] After rcu_read_lock [ 1.808691] After rcu_read_unlock [ 1.808691] After rcu_read_unlock [ 1.816691] After kthreadd_done [ 1.816691] After kthreadd_done [ 1.820702] smpboot: Start of smp_prepare_cpus_common [ 1.820702] smpboot: Start of smp_prepare_cpus_common [ 1.828692] smpboot: smpboot: zalloc 0 [ 1.828692] smpboot: smpboot: zalloc 0 [ 1.836691] smpboot: smpboot: zalloc 1 [ 1.836691] smpboot: smpboot: zalloc 1 [ 1.844264] smpboot: smpboot: After set_sched_topology() [ 1.844264] smpboot: smpboot: After set_sched_topology() [ 1.848692] smpboot: smpboot: After smp_sanity_check() [ 1.848692] smpboot: smpboot: After smp_sanity_check() [ 1.856691] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev() [ 1.856691] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev() [ 1.975270] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev() [ 1.975270] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev() [ 1.980691] smpboot: smp_get_logical_apicid() [ 1.980691] smpboot: smp_get_logical_apicid() [ 1.988691] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1) [ 1.988691] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1) [ 1.997054] cblist_init_generic: Setting adjustable number of callback queues. [ 1.997054] cblist_init_generic: Setting adjustable number of callback queues. [ 2.000695] cblist_init_generic: Setting shift to 1 and lim to 1. [ 2.000695] cblist_init_generic: Setting shift to 1 and lim to 1. [ 2.008733] cblist_init_generic: Setting shift to 1 and lim to 1. [ 2.008733] cblist_init_generic: Setting shift to 1 and lim to 1. [ 2.016731] cblist_init_generic: Setting shift to 1 and lim to 1. [ 2.016731] cblist_init_generic: Setting shift to 1 and lim to 1. [ 2.024735] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 2.024735] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 2.032694] ... version: 0 [ 2.032694] ... version: 0 [ 2.040691] ... bit width: 48 [ 2.040691] ... bit width: 48 [ 2.048691] ... generic registers: 6 [ 2.048691] ... generic registers: 6 [ 2.056691] ... value mask: 0000ffffffffffff [ 2.056691] ... value mask: 0000ffffffffffff [ 2.064691] ... max period: 00007fffffffffff [ 2.064691] ... max period: 00007fffffffffff [ 2.072691] ... fixed-purpose events: 0 [ 2.072691] ... fixed-purpose events: 0 [ 2.080523] ... event mask: 000000000000003f [ 2.080523] ... event mask: 000000000000003f [ 2.084886] [ 2.084886] printk: console [ttyS0] printing thread started [ 2.084892] rcu: Hierarchical SRCU implementation. [ 2.084929] printk: console [earlyser0] printing thread started printk: console [ttyS0] printin[ 2.104725] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. g thread st[ 2.104834] smp: Bringing up secondary CPUs ... arted [ 2.084892] rcu: Hierarchical SRCU implementa[ 2.120786] x86: Booting SMP configuration: [ 2.120787] .... node #0, CPUs: #1 tion. [ 2.084929] printk: console [earlyser0] printing thread start[ 0.8d8 [ 4 12.10]72B] NMI 3atchdon: EnabUeD. Permanen ln ootsumes tn. hw- MU counter. [ 2.104834] smp: Bringing up secondary CPUs ... [ 2.120786] x86: Booting SMP configuration: [ 2.120787] .... node #0, CPUs: #1 [ 0.881412] Bit 30 in CPUID ECX not set. [ 2.124049] smp: Brought up 1 node, 2 CPUs [ 2.124051] smpboot: Max logical packages: 1 [ 2.124052] smpboot: Total of 2 processors activated (15601.72 BogoMIPS) [ 2.124650] devtmpfs: initialized [ 2.124650] x86/mm: Memory block size: 128MB [ 2.127593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns syr o u.1g7h9t] pinctrl 1o en iniei,l z2d pinctrl su 3, 30769 byt s, lpnear) tem [ 2.128136] PM: RTC time: 09:46:34, date: 2022-06-10 [ 2.131957] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.135416] audit: initializing netlink subsys (disabled) [ 2.137153] thermal_sys: Registered thermal governor 'fair_share' [ 2.137158] thermal_sys: Registered thermal governor 'bang_bang' [ 2.137159] thermal_sys: Registered thermal governor 'step_wise' [ 2.137161] thermal_sys: Registered thermal governor 'user_space' [ 2.139008] audit: type=2000 audit(1654854392.564:1): state=initialized audit_enabled=0 res=1 [ 2.124051] smpboot: Max lo[ c2a1l4 0p]acpuidle:gueisg:g vernor ladder [ 2.124052] smpboot: Total of 2 processors[ a2c1t8i0v] cpuidl :(u1i5g governor7m2n ogoMIPS) [ 2.124650] devtmpfs: initialized [ 2.124650] x86/mm: Memory block size: 128MB [i 2.1_3n94] C7:6M4C5N0IG for d8m5in 0000 0b0s00 -nfs agfTfB can oxt_mczy 4095 vm:m ap pagfsfffrfhfgepages-,0 8m7akx mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.153302] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.153356] PCI: Using configuration type 1 for base access [ 2.127609] futex hash table entries: 512 (order: 3, 32768 bytes, linear) e 2.[1 2 7.16885]] kprobes:tkrrlb cuop-opti iiatiot is enabled.dA lpkirnbcstare opsiuibes yfspoesmb [ 2.128136] PM: RTC time: 09:46:34, date: 2022-06-10 [ 2.131957] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.135416] audit: initializing netlink subsys (disabled) [ 2.137153] thermal_sys: Regist e r2.1847t7h euremLB: can gpoivieer7nvoermap pagesafirrh_gepages-r0e8'B 2.184707] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 2.184707] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.137158] thermal_sys: Registered thermal gov[ 2.1o2r3 ] cryptdg _ab_apn_gl'n set to 1000 [ 2.137159] thermal_sys: Registered thermal governor 'step_wise' [ 2.137161] thermal_sys: Registered thermal governor 'user_space' [ 2.2006 5] 2f.e1 3c9e0ul0_pre matuddsibled [t y p.200692]0A0P0: Added _OS((6o5u4e8D5v4ce) 2 . 526240:92] ACPI: sdtea tOSI(Prncistoi Devicz)e sions) d a2u2d0692] eCnI: Addlde_dSI(3.0r_eCs =x1e [ 2.200692] ACPI: Added _OSI(Processor Aggregator Device) [ 2.200692] ACPI: Added _OSI(Linux-Dell-Video) [ 2.200692] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 2.200692] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 2.144704] cpuidle: using governor ladder [ 2.148707] cpuidle: using governor menu [ 2.152831] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB 00) 2.203030]0CI: MMCONFIG for domain 0000 [bus 00-3f] at [mem[ 0 x2f283020] ACPI: DS0Txsfcbefsfully afqfi]e and loasee [ 2.153302] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 s 2.153356] PCI: Using[ o2n2f8687] ACrIa t iCPI AM taylpses ccessfully abqaisee nd loades [ 2.168857] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. d 2.184707] HugeTLB: can optimize 7 vmemmap pages f[ 2.23g855]pACPIg Ist-rprete4 enaBl [ 2.238925] ACPI: PM: (supports S0 S1 S3 S5) [ 2.238928] ACPI: Using IOAPIC for interrupt routing [ 2.239109] HEST: Table parsing has been initialized. [ 2.239182] GHES: Failed to enable APEI firmware first mode. [ 2.239184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.239187] PCI: Using E820 reservations for host bridge windows [ 2.240214] ACPI: Enabled 8 GPEs in block 00 to 1F [ 2.184707] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 2.184707] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.192539] cryptd: max_cpu_qlen set to 1000 [ 2.200695] After schedule_preempt_disabled B 2.200692] ACPI: Added _OSI([M 2d2564l6] ACPIe PiIcRoot idge [PCI0] (domain 0000 [bus 00-ff]) [ 2.256475] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] T 2.20[ 2.]6 6A0C Pcpi PNA0d0d:e0d OSC: OI (oP concrels [PME rE DCIeCapabclet) ] [ 2.260690] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 2.260690] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored [ 2.260690] acpi PNP0A03:00: clipped [mem 0x80000000-0xffffffff] to [mem 0x80000000-0xf7ffffff] for e820 entry [mem 0xf8000000-0xfbffffff] [ 2.200692] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.200692] ACPI: Added _OSI(Processor Aggregator Device) [ 2.264690] PCI host brid[ 2.200692] ACPI: Added _OSI(Linux-Dell-Video) [ 2.200692] ACPI: ge td due d0 0:00 [I ( L.264690]xp-iLbesn0000:00: NoVt-bHsDrMsourceA[uod ixo000-0x0cf7 window] [ 2.264690] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.264690] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff] [ 2.264690] pci_bus 0000:00: root bus resource [mem 0x80000000-0xf7ffffff] [ 2.264690] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.264690] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 [ 2.264690] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 [ 2.264690] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000 [ 2.264690] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 2.26469 0 pci 020.:20001.0: reg ]x 4A [ioI :x 0A0d0xe0ff] f01bffff]4690]npuix0-0H:P0:01.0: yeb rxi8- Gmrma0pf0180000)0 [ 2.264690] pci 0000:00:01.0: enabling Extended Tags [ 2.264690] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.264690] pci 0000:00:01.0: supports D1 D2 [ 2.264690] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 [ 2.264690] pci 0000:00:01.1: reg 0x10: [mem 0xf01c0000-0xf01c3fff] [ 2.264690] pci 0000:00:01.1: enabling Extended Tags [ 2.264690] pci 0000:00:01.1: supports D1 D2 [ 2.264690] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 2.264690] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417] [ 2.264690] pci[00 0 0 :21.0223323] ACPI: DSDT successfully acqu reg exd4 [iod xl4o0-0x1423] 2.264690] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f] [ 2.264690] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427] [ 2.264690] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f] [ 2.264690] pci 0000:00:11.0: reg 0x24: [mem 0xf01cc000-0xf01cc7ff] [ 2.264811] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 2.264837] pci 0000:00:12.0: reg 0x10: [mem 0xf01c8000-0xf01c8fff] [ 2.265449] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 2.265475] pci 0000:00:12.2: reg 0x10: [mem 0xf01cd000-0xf01cd0ff] [ 2.265598] pci 0000:00:12.2: supports D1 D2 [ 2.265601] pc 0 02:00:22.2: 3M3#1s]p orted from D0 D1 D2 D3hot [ 2.266140] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 2.266167] pci 0000:00:13.0: reg 0x10: [mem 0xf01c9000-0xf01c9fff] [ 2.268697] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 2.268697] pci 0000:00:13.2: reg 0x10: [mem 0xf01ce000-0xf01ce0ff] [ 2.268697] pci 0000:00:13.2: supports D1 D2 [ 2.268697] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 2.268697] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 2.268697] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 2.268697] pci 0000:00:14.2: reg 0x10: [mem [x 0 c 000-0xf02c2f8f687] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 2.2 64b8t] [5 2.2C8P97] pci n0t0e00:14.e:tPeEr ueported floe d0 D3 ot D3cold [ 2.268821] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 2.269450] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 2.270031] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 [ 2.270054] pci 0000:00:14.5: reg 0x10: [mem 0xf01ca000-0xf01cafff] [ 2.270671] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 [ 2.270725] pci 0000:00:15.0: enabling Extended Tags [ 2.270808] pci 0000:00:15.0: supports D1 D2 [ 2.271466] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400 [ 2.271526] pci 0000:00:15.1: enabling Extended Tags [ 2.271615] pci 0 0 : 021..1: supp9r2s D1 D2 lass 0x0604003(82] ucip0000r00:1s. : 01 22143a2S t pe 01 [ 2.273278] pci 0000:00:15.2: enabling Extended Tags [ 2.273619] pci 0000:00:15.2: supports D1 D2 [ 2.274523] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 [ 2.274550] pci 0000:00:16.0: reg 0x10: [mem 0xf01cb000-0xf01cbfff] [ 2.275164] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 [ 2.275190] pci 0000:00:16.2: reg 0x10: [mem 0xf01cf000-0xf01cf0ff] [ 2.275320] pci 0000:00:16.2: supports D1 D2 [ 2.275325] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 2.275882] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 [ 2.276106] p[ 2.2389ci 000]: 0A1C.P: [1022:U401]itnpg 0IcOass 0x06C0 0f [o 2.27n33e] pcir0u0p:t0 1r.2: [1t2i:n4g2 ype 00 class 0x060000 [ 2.276559] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 [ 2.277140] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 [ 2.277346] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 [ 2.277584] pci_bus 0000:01: extended config space not accessible [ 2.277765] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 2.277784] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 2.277793] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.277800] pci 0000:00:14.4: r d e2w.ndow [1e0 9x]0 a0000-0xT0:d fff] (sultea tpveadrcode) 2.27s8 5b eci 0000:00n1i.t:i abridzeewdn.o mem 0x80000000-0xf7ffffff] (subtractive decode) [ 2.277957] pci 0000:00:15.0: PCI bridge to [bus 02] [ 2.278153] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 2.278214] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0007fff 64bit] [ 2.278528] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 2.278606] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 2.288746] pci 0000:00:15.1: PCI bridge to [bus 03] [ 2.288760] pci 0000:00:15.1: bridge window [mem 0xf000[ 2.239182] GHES: Failed to enable APEI firmware first mode. [ 2.239184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug rnfiguration invalid ([bus 00-00][ 2.240214] ACPI: Enabled 8 GPEs in block 00), oeco1fFg ng [ 2.288999] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ [ 2.256456] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) t[e 2d2890C1] pni 00i0:04 00S0: M ClockPM Segments MSI HPX-Type3]00t-0x0[ff] ] 2.260690] acpi PNP0A03:00: _OSC: OS now controls [PMrEg 0xA8E [meP 0x0e0C00p0-0xb0000ift 64bLt pr] [ 2.289097] pci 0000:04:00.0: reg 0x20:[ 2.260690] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 2.260690] acp[ie PxN000000A-0x30:00fff 64 ih orsft [ r 2.28d286] p i i0n0:04w00.0: pupporte D1 D2o [ [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored [ 2.260690] acpi PNP0A03:0 0 2.289l8i]pppie0d00:04:00.0m M0#xs8p0orted 0r0m0D0 D1 x2fDfhftfDfcold [ 2.300 50] ecim 0x80000000-0xf7ffffff] for e820 entry [mem 0xf8000000-0xfbffffff] 2.300762] pci 0000:00:15.2: bridge window [[ 2.264690] pci_bus 0000:00: root bus resouir 0x 000-ix0ff ] 0 2.300707- 0ci 000f:70:15.2n d oridge indow [mem 0x00000000-0x000ff[ 2.264690] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.264690]fffp [ _ b2.30 770] pc0 :000::0:15r2: btidge biudsw [mem 0s0o0u0000-0e0 0[fmfe 64bit pxe000a0000-0x000dffff] [ 2.264690] pci_bus 0000:00: root bus resource [mem 0x80000000-0xf7f] f f f2]300784] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 2.302418][ 2.264690] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.264690] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 [ 2 2C6I4 6C9:0Interrupc ii k0I0TA con0i0u:e0 0or I:Q 0[ [ 0 2.20:795]1AC]I PCI: pneerru0t lclass 0x080600 [ 2.264690] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000 [ 2.264690] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xeink fNfBfcfnfiguredpfrreIRQ 0 2.303171] ACPI: PCI: Interrupt link INTC configu[ 2.264690] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff] [ 2.264690] pci 0000:00:01.0: reg 0x18: [mem 0xf0180000-0xf01bffff] [ 2.264690] ep coi IRQ 0 [ 0.00:502] ACPI: PCI: ennearbpl iink IN DEcxntieured fdr ITQags [ 2.264690] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0 22.323918] 6C9I0 PCI: Inie r0p0 0i0k:I0TE confi.u0e: os uRQ 0 [r t s.3041 D2 [ 2.264690] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 [ 2.264690] pci 0000:00:01.1: reg 0x10: [mem 0xf01c0000-0xf01c3fff] 299] ACPI: PCI: Interrupt link INTF configured for IRQ 0 [ 2.304673] ACPI: PCI: [ 2.264690] pci 0000:00:01.1: enabling Extended Tags Interrupt link INTG con i u e2 for I6Q406 9 .304689] ACPI0 PCI: :n0erru0t .ink :NTH uonfigured for IDQ10 2 D 2 304689] iommu: Default domain type: Translated [ 2.304689] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.304689] SCSI subsystem initialized [ 2.312838] ACPI: bus type USB registered [ 2.312838] usbcore: registered new interface driver usbfs [ 2.312838] usbcore: registered new interface driver hub [ 2.312838] usbcore: registered new device driver usb [ 2.320827] PCI: Using ACPI for IRQ routing [ 2.322215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.322225] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 2.324450] clocksource: Switched to clocksource t[sc- arly2 :[ 10.211637]8VFS:1Dq ot-cyche ha h 0ablecentrses 012 (1rder60,14096 bytes)VpS: D sk q0otas0dquo1_6.6.0 [ 2.512043] pnp: PnP ACPI init [ 2.513114] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved [ 2.514304] pnp: PnP ACPI: found 2 devices [ 2.537472] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.537922] NET: Registered PF_INET protocol family [ 2.545123] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.547435] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.547454] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) :[ [2i54 563]0TCP bi4d bhas- 0abl1s ha7h]ta0r0es: 32:680(:rder. 6, 26 144 eyge , linear0 le entries: 32768 (order: 7, 786432 bytes, linear) [ 2.547691] TCP: Hash tables configured (established 32768 bind 32768) [ 2.547849] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 2.547880] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 2.548174] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.548234] pci 0000:00:15.2: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref] [ 2.548244] pci 0000:00:15.2: BAR 13: assigned [io 0x2000-0x2fff] [ 2.548253] pci 0000:00:14.4: PCI bridge to [bus 01] 6[ 0 ]2pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423]] [ 2.264690] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f] .548287[] c 000:00:12.6:4P6I bridge tp cbus 003] 0 : 2.5412.30 :c r000:00 10.x:1 cb:idge winoow [mem xx10402040-0xf0xf1f4f2 ] .548323] pci 0000:04:00.0: BAR 4: assigned [mem 0x80000000-0x80003fff 64bit pref] [ 2.548347] pci 0000:04:00.0: BAR 2: assigned [mem 0x80004000-0x80004fff 64bit pref] [ 2.548368] pci 0000:04:00.0: BAR 0: assigned [io 0x2000-0x20ff] [ 2.548378] pci 0000:00:15.2: PCI bridge to [bus 04] [ 2.548383] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff] [ 2.548393] pci 0000:00:15.2: bridge window [mem 0x80000000-0x800fffff 64bit pref] [ 2.548401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.548406] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.5[ 48408 2ci_bus 0609:00] resource 0m0m 0x000a00:01010.00ffff] 0 2.x42403: c[_bus 0000:00x 1esource - 0mxm 04800000]0 f7ffffff] [ 2.548419] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 2.548423] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 2.548427] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff] [ 2.548430] pci_bus 0000:01: resource 7 [mem 0x80000000-0xf7ffffff] [ 2.548435] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff] [ 2.548439] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.548441] pci_bus 0000:04: resource 2 [mem 0x80000000-0x800fffff 64bit pref] [ 2.548759] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 2.549789] pci 0000[: 0 1 .2:.A2D USB 9e]i ep c i 20509030] :c0 00:0:00:12.0::A DrUSB ohci0hxn2off [ m2e551176] xcf 0000:00c10.0:0A-D USB devicec 1 [ 7 2.55]2 pci 0000:00:12.2: AMD USB ehci handoff [ 2.551838] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 2.552537] pci 0000:00:13.0: AMD USB device [ 2.552564] pci 0000:00:13.0: AMD USB ohci handoff [ 2.561006] pci 0000:00:13.2: AMD USB device [ 2.561038] pci 0000:00:13.2: AMD USB ehci handoff [ 2.561663] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 2.562396] pci 0000:00:14.5: AMD USB device [ 2.562427] pci 0000:00:14.5: AMD USB ohci handoff [ 2.563758] pci 0000:00:16.0: AMD USB device [ 2.264811] pci 0000:00:16.0: AMD USB ohci handoff [ 0205:5116] pc: [000002:26.2: A8D0U7B]d vice e 0205 5c5l] pci 00 000x:06.2: AMD1U0B ci handoff [ 2.565785] pci 0000:00:16.2: PME# does not work under D3, disabling it [ 2.566733] pci 0000:03:00.0: AMD USB xhci handoff [ 2.566918] PCI: CLS 64 bytes, default 64 [ 2.567204] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround [ 2.568172] pci 0000:00:01.0: Adding to iommu group 0 [ 2.568228] pci 0000:00:01.1: Adding to iommu group 0 [ 2.568318] pci 0000:00:11.0: Adding to iommu group 1 [ 2.568421] pci 0000:00:12.0: Adding to iommu group 2 [ 2.568477] pci 0000:00:12.2: Adding to iommu group 2 [ 2.568567] pci 0000:00:13.0: Adding to iommu gr[ 2.264837] pci 0000:00:12.0: reg 0x10: [mem 0xf01c8000-0xf01c8fff] [ 2.265449] pci 0oup 3 [: 0 0.:68620].p2i:0000:00:2322: 7d8ing to iomyupgeoup 3 2.a6s7s3 0cx 0000:00320 [ 2.265475] pci 0000:00:12.2: reg 0x10: [mem 0xf01cd000-0xf01cd0ff] [ 2.265598] pci4 00 Adding 0o0i:m1u2g.oup 4 : Adding to iommu group 4 [s u 2.56879t] sci 0000: 0D12. [ [ 2.265601] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 2.266140] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 2. 6 822. 2ci 0006:70]1 .3: Addi g0t0 iommu0g0o:p143 . 2.5689e1g c0 0000::0 1[.4: Add 0xf01c9000-0xf01c9fff] [ 2.268697] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 ing[t o m 2roup 58 [ 9 72]5 9024] ic 00000:00:14.50 :d1ing to:i mrueggoup 6 1 0 :2.56mem 0xf01ce000-0xf01ce0ff] [ 2.268697] pci 0000:00:13.2: supports D1 D2 [ 2.268697] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot 0[1 4 ..069192] p1i00202::0715.1: Ad]i g to iem0u0g ocpl7a s s 2.569209c 0c5 0000:0 :15.2: Adding to iommu group 7 [ 2.5693[ 2.240] 6ci70000 00:1c.0 0dding :o0iomm1 4roup28 [ 2.509292]:p7i 0000d0 :t6y2p edding 0o icmluagsosp 8 0 2.569505 ci 0000:00:18.0: Adding to iommu group 9 [ 2.569594] pci 0000:00:18.1: Adding to iommu group 9 [ 2.569652] pci 0000:00:18.2: Adding to iommu group 9 [ 2.569712] pci 0000:00:18.3: Adding to iommu group 9 [ 2.569771] pci 0000:00:18.4: Adding to iommu group 9 [ 2.569822] pci 0000:00:18.5: Adding to iommu group 9 [ 2.569865] pci 0000:03:00.0: Adding to iommu group 7 [ 2.569905] pci 0000:04:00.0: Adding to iommu group 7 [ 2.586440] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 2.586459] AMD-Vi: Extended features (0x800000853): PreF PPR GT IA 2[0 x f.649244]0s0f0w-re IO 0L1:cm7pfed [fe 6x40b000005be0r:I (SWIOTLB) 00-0x000000005fe42000] (64MB) [ 2.649340] LVT offset 0 assigned for vector 0x400 [ 2.712682] perf: AMD IBS detected (0x000000ff) [ 2.712704] amd_uncore: 4 amd_nb counters detected [ 3.044762] workingset: timestamp_bits=37 max_order=20 bucket_order=0 [ 3.066888] zbud: loaded x509' registeredAhyomtt ic key porled giste efol f0m:l0 [ 2.268821] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 2.269450] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 2.270031] pci 0000:00:14.5: [10[ : 7.870198] lt: self-tes0s0f r CTR-sKDF0(xm0ccs0a351)) passed [ 3.272256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.272386] io scheduler mq-deadline registered [ 3.272388] io scheduler kyber registered [ 2.270054] pci 0000:00:14.5: reg 0x10: [mem 0xf01ca000-0xf01cafff] [ 2.270671] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 [ 2.270725] pci 0000:00:15.0: enabling Extended Tags [ 2.270808] pci 0000:00:15.0: supports D1 D2 [ 2.271466] pci 0000:00:15.1: [1022:43a1] type 1 3.3c8l49] sciep0rt 0000:00:10.0: PME: Signaling with IRQ 25 [ 3.318588] pcieport 0000:00:15.1: PME: Signaling with IRQ 26 [ 3.318818] pcieport 0000:00:15.2: enabling device (0000 -> 0003) [ 3.319774] pcieport 0000:00:15.2: PME: Signaling with IRQ 27 [ 3.320655] input: Power Button as /devices/LNXSYSTM[ 2.271526] pci 0000:00:15.1: enabling Extended Tags [ 2:.02L7XPWR6N:005i]pup/inpit [0 0 0.:48756]1A5P.:1button: uopep ourton [PDRF] D 3.348942] ACPI: \_SB_.P000: Found 2 idle states [ 3.349404] ACPI: \_SB_.P001: Found 2 idle states [ 2.273082] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400 [ 2.273278] pci [ 0 0.073868]:t1e5m.l LNX enabling Extended Tags [ 2.27THERM109:]r gistered a0 0h0r0a:_zone0: [ 1 53.323:7 ] ACPIp thetmal: Ther1alDZ2ne [TZ00] (14 C) s 3.3[ 2.274523] pci 0000:00:16.0: [1022:74470]7Serialt 825p/165 0 drivcr, 32 sorts, 0RQ s0ar1ng d bled [ 3.376848] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.395992] Non-volatile memory driver v1.3 [ 2.274550] pci 0000:00:16.0: reg 0x10: [mem 0xf01cb000-0xf01cbfff] [ 2. 7.413611] ]MD-Vp: iMD I0MMUv2 0o:de0 and1i6itia:iz[d [ 2 2.4754240 ahc] 000t:00:p1. : A0C0 0c1.0300 3 0lxts 8 por3s260Gbps 0x40 impl SATA mode [ 3.415431] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio [ 2.275190] pci 0000:00:16.2: reg 0x10: [mem 0x[0 1 3.440020]0s-si host0: 1hcif [ 0 f3f4415 0] scsi host1: ahci [ 3.442275] scsi host2: ahci [ 3.442965] scsi host3: ahci [ 3.443669] scsi host4: ahci [ 3.444379] scsi host5: ahci [ 2.275320] pci 0000:00:16.2: supports D1 D2 [ 3.462197] scsi host6: ahci [ 3.462913] scsi host7: ahci [ 3.463304] ata port1: DUMMY [ 3.463306] ata p[ 2.275325] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot ort2: DUMMY [ 3.463309] ata port3: DUMMY [ 3.463312] ata port[ 2.275882] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 4: DUMMY [ 3.463314] ata port5: DUMMY [ 3.463316] ata port6: DUMMY [ 3.463324] ata port7: SATA max UDMA[ 2.276106] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 /133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19 [ 3.463328] ata port8: DUMMY [ 3.466536] ACPI: bus type d[ 2.276333] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 rm_connector registered [ 3.471071] i8042: PNP: No PS/2 controller found. [ 3.471083] i8042: Probing ports d[ 2.276559] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 [ 2.277140] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 irectly. [ 2.277346] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 [ 2.277584] pci_bus 0000:01: extended config space not accessible [ 2.277765] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 2.277784] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 2.277793] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.277800] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff] (subtractive decode) [ 2.277805] pci 0000:00:14.4: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode) [ 2.277957] pci 0000:00:15.0: PCI bridge to [bus 02] [ 2.278153] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 2.278214] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0007fff 64bit] [ 2.278528] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 2.278606] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 2.288746] pci 0000:00:15.1: PCI bridge to [bus 03] [ 2.288760] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff] [ 2.288773] pci 0000:00:15.2: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.288999] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 2.289034] pci 0000:04:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.289071] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.289097] pci 0000:04:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.289286] pci 0000:04:00.0: supports D1 D2 [ 2.289288] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.300750] pci 0000:00:15.2: PCI bridge to [bus 04-ff] [ 2.300762] pci 0000:00:15.2: bridge window [io 0x0000-0x0fff] [ 2.300767] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff] [ 2.300777] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2.300784] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 2.302418] ACPI: PCI: Interrupt link INTA configured for IRQ 0 [ 2.302795] ACPI: PCI: Interrupt link INTB configured for IRQ 0 [ 2.303171] ACPI: PCI: Interrupt link INTC configured for IRQ 0 [ 2.303542] ACPI: PCI: Interrupt link INTD configured for IRQ 0 [ 2.303918] ACPI: PCI: Interrupt link INTE configured for IRQ 0 [ 2.304299] ACPI: PCI: Interrupt link INTF configured for IRQ 0 [ 2.304673] ACPI: PCI: Interrupt link INTG configured for IRQ 0 [ 2.304689] ACPI: PCI: Interrupt link INTH configured for IRQ 0 [ 2.304689] iommu: Default domain type: Translated [ 2.304689] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.304689] SCSI subsystem initialized [ 2.312838] ACPI: bus type USB registered [ 2.312838] usbcore: registered new interface driver usbfs [ 2.312838] usbcore: registered new interface driver hub [ 2.312838] usbcore: registered new device driver usb [ 2.320827] PCI: Using ACPI for IRQ routing 0[0 0 00,816517Q ss : Refine8 ,S clocksource calibration: 3900.223 MHz3e0d [ 3.816521] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705a6472c, max_idle_ns: 881590586812 ns [ 3.989487] clocksource: Switched to clocksource tsc [ 3.989505] i8042: Can't read CTR while initializing i8042 [ 3.989507] i8042: probe of i8042 failed with error -5 [ 2.322225] hpet0[ 4.0 7c18m ataadev7t0: AsA-9: S2nDbsktSDSS1P0.43, 2.1.0, 0a UDMA/ 33o [ n 4.02782 ] ata dev7.0: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) [ 4.027962] mousedev: PS/2 mouse device common for all mice [ 4.028175] rtc_cmos 00:01: RTC can wake from S4 [ 4.028942] rtc_cmos 00:01: registered as rtc0 [ 4.028977] rtc_cmos 00:01: setting system clock to 2022-06-10T09:46:36 UTC (1654854396) [ 4.029074] rtc_cmos 00:01: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 4.029294] device-mapper: uevent: version 1.0.3 2.324450] clocksource: Switched [ o 4c0l7o1c] deviceumrpper: iostc:-4e46.0-ilyt 2022-02-22) initialised: dm-devel@redhat.com [ 4.078148] hid: raw HID events driver (C) Jiri Kosina [ 4.078293] usbcore: registered new interface driver usbhid [ 4.078297] usbhid: USB HID core driver [ 4.078499] Initializing XFRM netlink socket [ 4.078529] NET: Registered PF_PACKET protocol family [ 4.078541] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.511536] VFS: Disk quotas dquot_6.6.0 : Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.512043] pnp: PnP ACPI init [ 2.513114] system 00:0 0 .[2930m micxofode:1CPU0: 0at-h0levee=0x0100110f [ as been reserved [ 2.514304] pnp 4P1n8P25] miCrPcId:: CPU1: uancd_level=0d0e0v1i1f [s :[ m a4s1k4:53]0IxI shorthand bro dmaat: enablcdlDaicer: v2.2. e s :4 104482] fVf fersion ofagxm_eicddlc enganes.: : Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 2 04.1376870 1cs2 :n:s: [ 4.138993] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 4.139023] sd 6:0:0:0: [sda] Write Protect is off [ 4.139080] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.139143] sd 6:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 4.146404] AES CTR mode by8 optimization enabled [ 4.152625] sda: sda1 sda2 sda3 [ 4.153337] sd 6:0:0:0: [sda] Attached SCSI disk [ 2.537922] NET: Registered PF_INET protocol family [ 2.545123] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 4 2257315 sched_c3o5k: Marticgps_alli s3t352818_5p o7r4t2a7d)d>r51963219s6h 9h362s463) table entri :.236230] 8egis(eoed tasestats ersi,n 1 32768 bytes, linear) [ 2.547454] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.547479] TCP established[ h4.2412h3] ztwap:blladedeusinr pool szo/zbu3 : 3 247263846] derud_emrpgtabl, :7[d6bug_3m_pgbable s l i: eaaid)ting ava arc[ i2e.t5re page 9a1l] helpersP [ 4.a6s7h6] kmemlelke sutomaticnmfmirg scannend h(eed startbdl ished 32768 bind 32768) es: 2048 (order: 4, 65536 bytes, linear)rypted regnstered [ 2.547880] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 2.548174] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.548234] pci 0000:00:15.2: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref] [ 2.548244] pci 0000:00:15.2: BAR 13: assigned [io 0x2000-0x2fff] [ 2.548253] pci 0000:00:14.4: PCI bridge to [bus 01] [ 2.548273] pci 0000:00:15.0: PCI bridge to [bus 02] [ 2.548287] pci 0000:00:15.1: PCI bridge to [bus 03] [ 2.548293] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff] [ 2.548323] pci 0000:04:00.0: BAR 4: assigned [mem 0x80000000-0x80003fff 64bit pref] [ 2.548347] pci 0000:04:00.0: BAR 2: assigned [mem 0x80004000-0x80004fff 64bit pref] [ 2.548368] pci 0000:04:00.0: BAR 0: assigned [io 0x2000-0x20ff] [ 2.548378] pci 0000:00:15.2: PCI bridge to [bus 04] [ 2.548383] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff] [ 2.548393] pci 0000:00:15.2: bridge window [mem 0x80000000-0x800fffff 64bit pref] [ 2.548401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.548406] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.548408] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff] [ 2.548413] pci_bus 0000:00: resource 7 [mem 0x80000000-0xf7ffffff] [ 2.548419] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 2.548423] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 2.548427] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff] [ 2.548430] pci_bus 0000:01: resource 7 [mem 0x80000000-0xf7ffffff] [ 2.548435] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff] [ 2.548439] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.548441] pci_bus 0000:04: resource 2 [mem 0x80000000-0x800fffff 64bit pref] [ 2.548759] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 2.549789] pci 0000:00:12.0: AMD USB device [ 2.549834] pci 0000:00:12.0: AMD USB ohci handoff [ 2.551176] pci 0000:00:12.2: AMD USB device [ 2.551211] pci 0000:00:12.2: AMD USB ehci handoff [ 2.551838] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 2.552537] pci 0000:00:13.0: AMD USB device [ 2.552564] pci 0000:00:13.0: AMD USB ohci handoff [ 2.561006] pci 0000:00:13.2: AMD USB device [ 2.561038] pci 0000:00:13.2: AMD USB ehci handoff [ 2.561663] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 2.562396] pci 0000:00:14.5: AMD USB device [ 2.562427] pci 0000:00:14.5: AMD USB ohci handoff [ 2.563758] pci 0000:00:16.0: AMD USB device [ 2.563785] pci 0000:00:16.0: AMD USB ohci handoff [ 2.565116] pci 0000:00:16.2: AMD USB device [ 2.565151] pci 0000:00:16.2: AMD USB ehci handoff [ 2.565785] pci 0000:00:16.2: PME# does not work under D3, disabling it [ 2.566733] pci 0000:03:00.0: AMD USB xhci handoff [ 2.566918] PCI: CLS 64 bytes, default 64 [ 2.567204] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround [ 2.568172] pci 0000:00:01.0: Adding to iommu group 0 [ 2.568228] pci 0000:00:01.1: Adding to iommu group 0 [ 2.568318] pci 0000:00:11.0: Adding to iommu group 1 [ 2.568421] pci 0000:00:12.0: Adding to iommu group 2 [ 2.568477] pci 0000:00:12.2: Adding to iommu group 2 [ 2.568567] pci 0000:00:13.0: Adding to iommu group 3 [ 2.568620] pci 0000:00:13.2: Adding to iommu group 3 [ 2.568743] pci 0000:00:14.0: Adding to iommu group 4 [ 2.568790] pci 0000:00:14.2: Adding to iommu group 4 [ 2.568852] pci 0000:00:14.3: Adding to iommu group 4 [ 2.568951] pci 0000:00:14.4: Adding to iommu group 5 [ 2.569024] pci 0000:00:14.5: Adding to iommu group 6 [ 2.569129] pci 0000:00:15.0: Adding to iommu group 7 [ 2.569192] pci 0000:00:15.1: Adding to iommu group 7 [ 2.569249] pci 0000:00:15.2: Adding to iommu group 7 [ 2.569340] pci 0000:00:16.0: Adding to iommu group 8 [ 2.569398] pci 0000:00:16.2: Adding to iommu group 8 [ 2.569535] pci 0000:00:18.0: Adding to iommu group 9 [ 2.569594] pci 0000:00:18.1: Adding to iommu group 9 [ 2.569652] pci 0000:00:18.2: Adding to iommu group 9 [ 2.569712] pci 0000:00:18.3: Adding to iommu group 9 [ 2.569771] pci 0000:00:18.4: Adding to iommu group 9 [ 2.569822] pci 0000:00:18.5: Adding to iommu group 9 [ 2.569865] pci 0000:03:00.0: Adding to iommu group 7 [ 2.569905] pci 0000:04:00.0: Adding to iommu group 7 [ 2.586440] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 2.586459] AMD-Vi: Extended features (0x800000853): PreF PPR GT IA [ 2.586526] AMD-Vi: Interrupt remapping enabled [ 2.649235] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.649249] software IO TLB: mapped [mem 0x000000005be42000-0x000000005fe42000] (64MB) [ 2.649340] LVT offset 0 assigned for vector 0x400 [ 2.712682] perf: AMD IBS detected (0x000000ff) re: 4 amd_nb counters detectedmaem:d1_:938:777 [ 3.044762] workingset: timestamp_bits=37 max_order=20 bucket_order=0 [ 3.066888] zbud: loaded [ 3.141329] NET: Registered PF_ALG protocol family [ 3.141346] Key type asymmetric registered [ 3.141351] Asymmetric key parser 'x509' registered [ 3.272138] alg: self-tests f[ or CTR-KDF (hmac (sha256)) passe 4 .753311] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. [ [ 3.272256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) 4.753382] VFS: Mounted root (ext4 filesystem) read[o 3.272386] ino scheduler mq-lyeadline register ed on device 8:3. [ 4.755766] devtmpfs: mounted [ 4.755797] After kernel_init_freeable [ 4.780189] Freeing unused kernel image (initmem) memory: 1728K [ 3.272388] io scheduler kyber registered [ 3.318049] pcieport 0000:00:15.0: PME: Signaling with IRQ 25 [ 3.318588] p[ cieport 0000:00: 15.1: PME: Sign ling with IRQ 2 4.799836] Wri[ 3.318818] pcieport 0000:00:t1e5.2: enabling d pevice (0000 -> 0rot003) ecting the kernel read-only data: 22528k [ [ 3.319774] pcieport 0000:00:15.2: PME: Signaling with IRQ 27 [ 3.320655] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut0 4.817366] Freeing unused kernel image (text/rodata gap) memory: 2040K [ [ 3.348756] ACPI: button: Power Button [PWRF] 4 .817886] Freeing unused kernel image (rodata/data gap) memory: 1768K [ 3.348942] ACPI: \_SB_.P000: Found 2 idle states [ 3.349404] ACPI: \_SB_.P001: Found 2 idle states [ 3.373868] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.373873] ACPI: thermal: Thermal Zone [TZ00] (14 C) [ 3.374473] Serial: 8250/16550 driver, 32 ports, IRQ sharing [d isabled 4.882142] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.882149] rodata_test: all tests were successful [ 4.882150] After mark_readonly [ 4.882152] After pti_finalize [ 4.882164] rcu_end_inkernel_boot [ 4.882174] Run /sbin/init as init process [ 3.376848] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.395992] Non-volatile memory driver v1.3 [ 3.413711] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 3.415424] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode [ 3.415431] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio [ 3.440722] scsi host0: ahci [ 3.441570] scsi host1: ahci [ 3.442275] scsi host2: ahci [ 3.442965] scsi host3: ahci [ 3.443669] scsi host4: ahci [ 3.444379] scsi host5: ahci [ 3.462197] scsi host6: ahci [ 3.462913] scsi host7: ahci [ 3.463304] ata port1: DUMMY [ 3.463306] ata port2: DUMMY [ 3.463309] ata port3: DUMMY [ 3.463312] ata port4: DUMMY [ 3.463314] ata port5: DUMMY [ 3.463316] ata port6: DUMMY [ 3.463324] ata port7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19 [ 3.463328] ata port8: DUMMY [ 3.466536] ACPI: bus type drm_connector registered [ 3.471071] i8042: PNP: No PS/2 controller found. [ 3.471083] i8042: Probing ports directly. [ 3.816492] ata link7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.816517] tsc: Refined TSC clocksource calibration: 3900.223 MHz [ 3.816521] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705a6472c, max_idle_ns: 881590586812 ns [ 3.989487] clocksource: Switched to clocksource tsc [ 3.989505] i8042: Can't read CTR while initializing i8042 [ 3.989507] i8042: probe of i8042 failed with error -5 [ 4.027818] ata dev7.0: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 [ 4.027823] ata dev7.0: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) [ 4.027962] mousedev: PS/2 mouse device common for all mice [ 4.028175] rtc_cmos 00:01: RTC can wake from S4 [ 4.028942] rtc_cmos 00:01: registered as rtc0 [ 4.028977] rtc_cmos 00:01: setting system clock to 2022-06-10T09:46:36 UTC (1654854396) [ 4.029074] rtc_cmos 00:01: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 4.029294] device-mapper: uevent: version 1.0.3 [ 4.077511] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com SELinux: Could [ 4.078148] hid: raw HID events driver (C) Jiri Kosina not open policy [ 4.078293] usbcore: registered new interface driver usbhid file <= /etc/sel[ 4.078297] usbhid: USB HID core driver inux/targeted/po[ 4.078499] Initializing XFRM netlink socket licy/policy.33: [ 4.078529] NET: Registered PF_PACKET protocol family No such file or[ 4.078541] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. directory [ 4.120997] ata dev7.0: configured for UDMA/133 [ 4.129302] microcode: CPU0: patch_level=0x0600111f [ 4.128725] microcode: CPU1: patch_level=0x0600111f [ 4.134450] microcode: Microcode Update Driver: v2.2. [ 4.134453] IPI shorthand broadcast: enabled [ 4.134482] AVX version of gcm_enc/dec engaged. [ 4.137687] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 [ 4.138993] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 4.139023] sd 6:0:0:0: [sda] Write Protect is off [ 4.139080] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.139143] sd 6:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 4.146404] AES CTR mode by8 optimization enabled [ 4.152625] sda: sda1 sda2 sda3 [ 4.153337] s[d 6:0:0:0: [sda Attached SCSI di sk 5.215527] systemd[1]: Inserted module 'autofs4' [ 4.215731] sched_clock: Marking stable (3335281845, 877412678)->(5196321986, -983627463) [ 4.236630] registered taskstats version 1 [ 4.241213] zswap: loaded using pool lzo/zbud [ 4.243041] kmemleak: Kernel memory leak detector initialized (mem pool available: 15687) [ 4.243046] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 4.264706] kmemleak: Automatic memory scanning thread started [ 4.286634] Key type encrypted registered [ 4.718532] PM: Magic number: 10:938:777 [ 4.753311] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. [ 4.753382] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 4.755766] devtmpfs: mounted [ 4.755797] After kernel_init_freeable [ 4.780189] Freeing unused kernel image (initmem) memory: 1728K [ 4.799836] Write protecting the kernel read-only data: 22528k [ 4.817366] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.817886] Freeing unused kernel image (rodata/data gap) memory: 1768K [ 4.882142] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.882149] rodata_test: all tests were successful [ 4.882150] After mark_readonly [ 4.882152] After pti_finalize [ 4.882164] rcu_end_inkernel_boot [ 4.882174] Run /sbin/init as init process [ 5.215527] systemd[1]: Inserted module 'autofs4' [ [ 5.349586] N ET: Registered F _INET6 protocol5 .family 349586] NET: Registered PF_IN[ 5.350417] Segment Routing with IPv6 [ 5.350438] In-situ OAM (IOAM) with IPv6 ET6 protocol family [ 5.350417] Segment Routing with IPv6 [ 5.350438] In-situ OAM (IOAM) with IPv6 [ 5.3914[6 5.391464] s4y]stemd[1]: syste symd 251.2-2 runninsg in system motee (+PAM +AUDIT +mSdELINUX +APPARMO[R +IMA +SMACK +E1CCOMP +GCRYPT G]NUTLS +OPENSSL+:ACL +BLKID +CUL +ELFUTILS +FIOs2 +IDN2 -IDN +yPsTC +KMOD +LIBCRtYPTSETUP +LIBFDeSmK +PCRE2 -PWQUAdLITY -P11KIT -Q 2ENCODE +TPM2 +BZ5IP2 +LZ4 +XZ +ZI1B +ZSTD -BPF_F.AMEWORK -XKBCOM2-ON +UTMP +SYSVIN2I T default-hierarruchy=unified) nning in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.391474] systemd[1]: Detected architecture x86-64. Welcome to 5.391474] systemd[1]: Detected architecture x86-64. mDebian GNU/Linux bookworm/sid! [[ 5.481612] s ystemd[1]: Hosta me set to . .481612] systemd[1]: Hostname set to . [ OK [ 5.688870] sy stemd[1]: Queu d5 start job for d.efault target 688raphical Interfa8c7e. 0] systemd[1]: Queued start job for default target Graphical Interface. [ 5.691277] systemd[1]: Created slice Slice /system/getty. 0m] Created slic[ 5.691277] systemd[1]: Created slice Slice /system/getty. e Slice /system/getty. [ OK ] Created slice Slice[ 5.733847] systemd[1]: Created slice Slice /system/modprobe. /system/modprob[ 5.733847] systemd[1]: Created slice Slice /system/modprobe. e. [ OK ] Created slice Slice[[ 5.761856] s y stemd[1]: Creat 5e.d slice Slice /7system/serial-g618tty. 56] systemd[1]: Created slice Slice /system/serial-getty. /system/serial-getty. 9 OK ] Created slice User [[ 5.789726] s ystemd[1]: Create5d slice User a.d7 Session Slice.8 726] systemd[1]: Created slice User and Session Slice. and Session Slice. [ OK ] Started Dispatch Pa[[ 5.817102] ystemd[1]: Stare d Dispatch Pas word Requests t Console Directr5y Watch. .817102] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. ssword …ts to Console Directory Watch. [ OK ] Started Forward Pas[[ 5.849068] ystemd[1]: Star ed Forward Pass ord Requests toW all Directory a5tch. .849068] systemd[1]: Started Forward Password Requests to Wall Directory Watch. sword R…uests to Wall Directory Watch. [ OK ] Set up automount Ar[[ 5.881433] ystemd[1]: Set p automount Arb 5trary Executable. File Formats Fl8e System Autom8unt Point. 1433] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. bitrary…s File System Automount Point. [ OK ] Reached target Loca[[ 5.916970] sy stemd[1]: Reace d target Local Encrypted Volums5. .916970] systemd[1]: Reached target Local Encrypted Volumes. l Encrypted Volumes. [ OK ] Reached target Loca[[ 5.944920] ystemd[1]: Reach e5d target Local .Integrity Prote9t4ed Volumes. 4920] systemd[1]: Reached target Local Integrity Protected Volumes. l Integrity Protected Volumes. [ OK ] Reached target Path[[ 5.976938] ystemd[1]: Reach 5ed target Path U.97nits. 6938] systemd[1]: Reached target Path Units. Units. [ OK ] Reached target Remo[[ 6.000926] ystemd[1]: Reach 6ed target Remote. 0File Systems. 00926] systemd[1]: Reached target Remote File Systems. te File Systems. [ OK ] Reached target Slic[[ 6.028900] y stemd[1]: Reac ed target Slice U6nits. .028900] systemd[1]: Reached target Slice Units. e Units. OK ] Reached target Swap[[ 6.052936] sy stemd[1]: Reace d target Swaps 6.052936] systemd[1]: Reached target Swaps. s. [ OK ] Reached target Loca[[ 6.076935] ystemd[1]: Reach e6d target Local .V0erity Protected7 Volumes. 6935] systemd[1]: Reached target Local Verity Protected Volumes. l Verity Protected Volumes. [ OK ] Listening on fsck t[ [ 6.109278] s y stemd[1]: Liste6ning on fsck to.fsckd communica1ion Socket. 09278] systemd[1]: Listening on fsck to fsckd communication Socket. o fsckd communication Socket. [ OK ] Listening on initct[[ 6.141099] s ystemd[1]: List ning on initctl Compatibility Nm6ed Pipe. .141099] systemd[1]: Listening on initctl Compatibility Named Pipe. l Compatibility Named Pipe. [ OK ] Listening on Journa[[ 6.173293] s y stemd[1]: Liste6.n1ing on Journal 73Audit Socket. 293] systemd[1]: Listening on Journal Audit Socket. l Audit Socket. [ OK ] Listening on Journa[[ 6.201277] ystemd[1]: Listn ing on Journal S ocket (/dev/log6).. 201277] sysl Socket (/dev/ltemd[1]: Listening on Journal Socket (/dev/log). og). [ OK ] Listening on Journa[ [ 6.229287] s ystemd[1]: List n6ing on Journal .S2ocket. 29287] systemd[1]: Listening on Journal Socket. l Socket. [ OK ] Listening on Networ[[ 6.253274] y stemd[1]: Liste n ing on Network 6.2Service Netlink 532Socket. 74] systemd[1]: Listening on Network Service Netlink Socket. k Service Netlink Socket. [ OK ] Listening on udev C[[ 6.281771] y stemd[1]: List ning on udev Co t rol Socket. 6.281771] systemd[1]: Listening on udev Control Socket. ontrol Socket. [ OK ] Listening on udev K[[ 6.309200] y stemd[1]: List ning on udev Ker 6nel Socket. .309200] systemd[1]: Listening on udev Kernel Socket. ernel Socket. Mountin[[ 6.339443] systemd[1]: Mounting Huge Pages File System... g Huge 6.339443] systemd[1]: Mounting Huge Pages File System... Pages File System... Mounting POSIX[ 6.367258] systemd[1]: Mounting POSIX Message Queue File System... Message Queue F[ 6.367258] systemd[1]: Mounting POSIX Message Queue File System... ile System... Mounting Kerne[ 6.399258l Debug File Sys] [ 6.399258] systemd[1]: Mounting Kernel Debug File System... tem... systemd[1]: Mounting Kernel Debug File System... Mounting Kerne[ 6.423247] systemd[1]: Mounting Kernel Trace File System... [ 6.423247] systemd[1]: Mounting Kernel Trace File System... l Trace File System... Startin[ 6.451454] systemd[1]: Starting Create List o[f Static Devic Nodes... 6.451454] systemd[1]: Starting Create List of Static Device Nodes... g Create List of Static Device Nodes... Startin[ 6.483337] systemd[1]: Start[ ing Load Kernel Module configfs. . 6.483337] systemd[1]: Starting Load Kernel Module configfs... g Load Kernel Module configfs... Startin[ 6.511330] systemd[1]: Starti[ng Load Kernel M odule drm... 6.511330] systemd[1]: Starting Load Kernel Module drm... g Load Kernel Module drm... Kernel Module fu Module fuse...systemd[1]: Starting Load Kerng Load [ 6.539321] seystemd[1]: Staring Load Kernel lModule fuse... se... [ [ 6.556944] f use: init (API v6.5ersion 7.36) 56944] fuse: init (API version 7.36) Starting File [ 6.571105] systemd[1]: Startin[ 6.571105] sygstemd[1]: Star Fing File System Check on Root Device... System Check on ile System Check on Root Device... Root Device... Starting Journal Service... Starting Lo[ 6.605953] systemd[1]: Starting Journal ad/Save Random S[ 6.605953] systemd[1]: Starting Journal Service... eed... Service... [ 6.606 Starting Apply Ker182] systemd[1]: Platform Persistent Stora[ 6.606182] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). nel Variablese Archim... val was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). Starting Coldplug All udev Devices... [ 6.609311] systemd[1]: Starting Load/Save Random Seed... 0;32m OK ] Mounted 6.609311] systemd[1]: St9mHuge Pages Filarting Load/Save Random Seed..e System. [. OK 6.6095m] Mounted systemd[1]: Repartition Ro;39mPOSIX Messagot Disk was skipped because all trigger condition checks failed. e Queue File Sys[ 6.tem. [ systemd[1]2m OK ] Mo: Starting Apply Kernel Variables... unted Kernel Debug File System. [ systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. [0;32m OK [ 6.614232] systemd[1]: Create System Users was ] Mounted kipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ [ 6.612649] systemd[1]: Starting Apply Kernel Variables... 39mKernel Trace [ 6.614232] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). File System. 6.64618 [ OK 5] systemd[1]: Starting Coldpl] Finished g All udev Devices... [ 6[0;1;39mCreate L.664241] systemd[1]: Mounted Huge Pages File Sys[ 6.646185] systemd[1]: Starting Coldplug All udev Devices... ist of Static Detem. [ 6.664570] systemd[1]: Mounte[ 6.664241] systemd[1]: Mounted Huge Pages File System. d POSIX Message Queue File System. [ 6.672809] systemd[1]:[ 6.664570] systemd[1]: Mounted POSIX Message Queue File System. [ OK ounted Kernel [ 6.672809] systemd[1]: Mounted Kernel Debug File System. [0m] Finishedebug File System. [ 6.683632] systemd[1]: Moun[ 6.683632] systemd[1]: Mounted Kernel Trace File System. 0;1;39mLoad Kernted Kernel Trace File System. [ 6.697820] systemd[1]: Fi[ 6.697820] systemd[1]: Finished Create List of Static Device Nodes. el Module confignished Create List of Static Device Nodes. [ fs. [ 6.706278] systemd[1]: modprobe@configfs.service: Deactivated successfully. m OK ] Fin6.706278] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.706617] systemd[1]: Finished Load Kernel Module configfs. ished L[ 6.706617] systemd[1]: Finished Load Kernel Modu[ 6.707379] systemd[1]: modprobe@drm.service: Deactivated successfully. oad Kernel Modulle configfs. [ 6.707379] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.7[ 6.707695] systemd[1]: Finished Load Kernel Module drm. e drm. 07695] systemd[[ 6.708505] systemd[1]: modprobe@fuse.service: Deactivated successfully. 1]: Finished Load Kernel Module drm. [ 6.708505] systemd[1]: modprobe@fuse.service: Deactivated succe[ 6.719384] systemd[1]: Finished Load Kernel Module fuse. ssfully. [ 6.719384] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished File Syste[ 6.929508] systemd[1]: Finishe[ 6.929508] systemd[1]: Finished File System Check on Root Device. m Check on Root d File System Check on Root Device. Device. [ OK ] Finished Load/Save [ 6.957400] systemd[1]: Finished Load/Save Random Seed. Random Seed.[ 6.957400] systemd[1]: Finished Load/Save Random Seed. [ OK ] Finished Apply Kern[ 6.981382] systemd[1]: Finished Apply Kernel Variables. el Variables[ 6.981382] systemd[1]: Finished Apply Kernel Va. riables. [ OK ] Reached target Loca[ 7.009563] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes). l File Systems 7.009563] systemd[1]: First 0m. Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes). [ 7.009597] systemd[1]: Reached target Local File Systems. [ 7.009597] systemd[1]: Reached target Local File Systems. Mountin[ 7.055583] systemd[1]: Mounting FUSE Control[ File System... 7.055583] systemd[g FUSE 1]: Mounting FUSE Control File System... Control File System... Mountin[ 7.083480] systemd[1]: Mounting Kernel Configuration File System... g Kerne[ 7.083480] systemd[1]: Mounting Kernel Conl Configuration figuration File System... File System... [ OK 7.112863] systemd[1]: Load AppArmor profiles was skipped because of a failed condition check (ConditionSecurity=apparmor). 0m] Started 7.112863] systemd[1]: Load AppArmor profiles was skipped beca1;39mFile Systemuse of a failed condition chec Check Daemon tok (ConditionSecurity=apparmor) report status 7.113769] systemd[1]: Set Up Additional Binary Formats was skipped because all trigger condition checks failed. 0m. . [ 7.113769] systemd[1]: Set Up Additional Binary Formats was skipped because all trigger condition checks failed. [ 7.113849] sy[ 7.113849] systemd[1]: Store a System Token in an EFI Variable was skipped because of a failed condition check (ConditionPathExists=/sys/firmware/efi/efivars/LoaderFeatures-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). stemd[1]: Store a System Token in an EFI Variable was skipped because of a failed condition check (ConditionPathExists=/sys/firmware/efi/efivars/LoaderFeatures-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). [ 7.116886] systemd[1]: Started File System Check Daemon to report status. Startin[[ 7.116886] systemd[1]: Started File System Check Daemon to report status. g Creat 7.187904] systee Static Device [ 7.187904] systemd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id). Nodes in /devd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id). [ 7.190664] m... [ 7.190664] systemd[1]: Starting Create Static Device Nodes in /dev... systemd[1]: Starting Create Static Device Nodes in /dev... [ OK ] Started 7.282088] systemd[1]: Started Journal Service. 1;39mJournal Ser[ 7.2vice. 82088] systemd[1]: Started Journal Service. [ OK ] Mounted FUSE Control File System. [ OK ] Finished Coldplug All udev Devices. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Create Static Device Nodes in /dev. Starting Flush Journal to Persistent Storage... [ [ 7.376116] s ystemd-journald1 70]: Received 7l.ient request to 3flush runtime 7o6urnal. 116] systemd-journald[170]: Received client request to flush runtime journal. Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Create Volatile Files and Directories. Starting Network Configuration... Starting Network Name Resolution... [ 7.525697] sd 6:0:0:0: Attached scsi gener[ 7.525697] sidc 6:0:0:0: Attac hed scsi generi sg0 type 0 sg0 type 0 Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. 7 7.614699] a[c pi_cpufreq: ove rriding BIOS pr vided _PSD data .614699] acpi_cpufreq: overriding BIOS provided _PSD data [ OK ] Started Network Configuration. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ [ 7.682422] e 7.hci_hcd: USB 2.06 8'Enhanced' Host242 Controller (EHC2I]) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.697694] ohci_hcd: USB 1.1 'Open' Host Controller (OH[ 7.697694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver CI) Driver [ OK ] Finished Record Sys[ 7.723233] ehci-pci: EHCI PCI platform driver tem Boot/Shutdow[ 7.723233] en in UTMP. hci-pci: EHCI PCI platform dri[ 7.723861] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 ver [ 7.723861] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,[ 7.723865] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection revision 0 [ 7.723865] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ OK 7.723890] [ 7.723890] ehci-pci 0000:00:12.2: EHCI Host Controller 0m] Stopped 7.723914] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 1;39mNetwork Namehci-pci 0000:00:12.2: EHCI He Resolutionost Cont. roller [ 7.723914] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus nu[m 7.723925] ebehci-pci 0000:00:r12.2: applying MD SB700/SB800/H u1dsommy qh workaro [nd 7.723925] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.723932] ehci-pci 0000:00:12.2: debug port 1 [ 7.724133] ehci-pci 0000:00:12.2: irq 17, io mem 0xf01cd000 [ 7.736723] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 7.737149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ [ 7.723932] ehci-pci 0000:00:12.2: debug port 1 7.737154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3 Startin[[ 7.724133] h ci-pci 0000:00: 712.2: irq 17, io. 7mem 0xf01cd000 7158] usg Network Name Resolutib usb1: Proon... duct: EHCI Host Co[ 7.736723] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 7.737149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 7.737154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1n troller [ 7.737161] usb usb1: Manufacturer: Linux 5.19.0-rc1 ehci_hcd [ 7.737164] usb usb1: SerialNumber: 0000:00:12.2 [ 7.737841] hub 1-0:1.0: USB hub found [ 7.737883] hub 1-0:1.0: 5 ports detected [ 7.738938] ehci-pci 0000:00:13.2: EHCI Host Controller [ 7.738968] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 7.738982] ehci-pci 0000:00:13.2: applying AMD SB700[ 7.737158] usb usb1: Product: EHCI Host Controller /SB800/Hudson-2/3 EHCI dummy qh workaround [ OK 7.738998] ehci[- 7.737161] upcsb usb1: Manufacit urer: Linux 5.109.0-rc1 ehci_hc0 00:00:13.2: debug p0m] Stopped Network Tim[ 7.737164] uosrb usb1: SerialNutmber: 0000:00:2 .2 1 [ 7.739171] ehci-pci 0000:00:13.2: irq 17, ie Synchronization. [ 7.737841] hub 1-0:1.0: USB hub found [ 7.737883] hub 1-0:1.0: 5 poo rts detected mem 0xf01ce000 [ 7.745145] piix4_smbus 0000:00:14.0: Au[ 7.738938] ehci-pci 0000:00:13.2: EHCI Host Controller [ 7.738968] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus numbexilr 2 iary SMBus Host Controller at 0xb20 [ 7.752709] ehci-pci 0000:00:13.2: U[ 7.738982] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.738998] eShBci-pci 0000:0013.2: debug port 1 2.0 starte[ 7.739171] ehci-pci 0000:00:13.2: irq 17, io mem 0xf01ce000 [ 7.745145] piix4_smbus 0000:d, 00:14.0: AuxiliaErHy SMBus Host Controller at 0xb20 CI 1.00 Startin[ 7.752940] usb[ 7.752709] ehuci-pci 0000:001s3.2: USB 2.0 sbarted, EHCI 1.02: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 7.752944] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.752946] usb usb2: Product: EHCI Host Controller [ 7.752948] usb usb2: Manufacturer: Linux 5.19.0-rc1 ehci_hcd [ 7.752949] usb usb2: SerialNumber: 0000:00:13.2 [ 7.753440] hub 2-0:1.0: USB hub found [ 7.753469] hub 2-0:1.0: 5 ports detected [ 7.754233] ehci-g Netwo[ 7.752940] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 rk Time Synchronization... [ 7.752944] usb usb2: New USB device strings: pMfr=3, Productci2, SerialNumber= 001 00:00:16.2: EHCI Host Controller [ 7.75425[ 7.752946] usb usb2: Product: EHCI Host Controller 7] ehci-pci 0000:00:16.2: new USB bus regis[ 7.752948] usb usb2: Manufacturer: Linux 5.19.0-rc1 ehci_hcd tered, assigned bus number 3 [FAILED[ 7.752949] usb usb2: SerialNumber: 0000:00:13.2 ] Failed to [ 7.753440] hub 2-0:1.0: USB hub found start N 7.etwork Name Reso[ 7.753469] hub 2-0:1.0: 5 ports detected lution. [ 7.754233] ehci-pci 0000:00:16.2: EHCI Host Controller 754269] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.754278] ehci-p[ 7.754257] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 ci 0000:00:16.2: debug port 1 [ 7.754406] ehci-pci 0000:00:16.2: irq 17, io mem 0xf01cf000 See 'systemctl s[ 7.754879] ohci-[p 7.754269] ecihci-pci 0000:00:: 16.2: applying AOHCMD SB700/SB800/HIu dson-2/3 EHCI dPummy qh workarond tatus systemd-resolved.service' for details. CI platform driver [ [ 7.754278] ehci-pci 0000:00:16.2: debug port 1 7.768708] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 7.769152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 .76ILED] Failed to [ 7.754406] e[h ci-pci 0000:00: 16.2: irq 17, i 7 mem 0xf01cf000 9157] usb usb3: New USB device strings: Mfr=3, Product=2, Sestart Network Time Synchronization.[ 7.754879] ohci-pci: OHCI PCI platform driver [ 7.768708] ehci-pci 0000:00:r1i6.2: USB 2.0 staalrted, EHCI 1.00Num ber=1 [ 7.769159] usb usb3: Product: EHCI Host Controller [ 7.769160] usb usb3: Manuf[ 7.769152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 7.769157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 acturer: Linux 5.19.0-rc1 ehci_hcd See 'systemctl s[ [ 7.769159] u sb usb3: Produc : EHCI Host Cont7r.oller 769161] usb usb3: SerialNumber: 0000:00:16.2 [ 7.830288] hub tatus systemd-timesyncd.service' for details. [ 7.769160] usb usb3: Manufacturer: Linux 5.19.0-rc1 ehci_hcd3 -0:1.0: USB hub found [ 7.830329] hub 3-0:1.0: 4 ports detected [ 7.8311[ 7.769161] usb usb3: SerialNumber: 0000:00:16.2 [ 7.830288] hub 3-0:1.0: USB hub found [ 7.830329] hub 3-0:1.0: 4 ports detected [ 7.831111] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 7.831131] oh ci-pci 0000:00[16.0: new USB b s registered, a signed bus numbr 4 7.831[ 7.831290] ohci-pci 0000:00:16.0: irq 18, io mem 0xf01cb000 ohci-pci 0000:00:16.0:[ 7.832753] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5 [ 7.832871] ohci-pci 0000:00:1 2.0: irq 18, i mem 0xf01c8000 [ 7.832879] onheci-pci 0000:00:13.0: OHCI PCI hwo st controller U[ 7.832900] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus numberS 6 B bus registered, assigned bus number 4 [ 7.8[ 7.832997] oh3ci-pci 0000:001123.0: irq 18, io mem 0xf01c9000 [ 7.833005] ohci-pci 0000:00:14.5: OHCI PCI host controller 90] ohci-pci 0000:00:16.0: irq 18, io mem 0xf01cb000 [ 7.832719] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 7.832753] ohci-pci [ 7.833022] ohci-pci 0000:00:14.5: new USB bus registered, as0signed bus numbr0 7 00:00:12.0: new USB bus registered, assigned bus number 5 [ 7.832871] ohci-p[ 7.833115] ohci-pci 0000:00:14.5: irq 18, io mem 0xf01ca000 ci 0000:00:12.0: irq 18, io mem 0xf01c8000 [ OK 7.8328[ 7.892961] u7sb usb4: New US 9device found, d]Vendor=1d6b, iP roduct=0001, bodDevice= 5.19 hci-pci 0000:00:13.0: OHCI PCI host controller [ 7.832900] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 7.832997] ohci-pci 0000:00:13.0: irq 18, io mem 0xf01c9000 [ 7.833005] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 7.833022] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 7.833115] ohci-pci 0000:00:14.5: irq 18, io mem 0xf01ca000 [ 7.892961] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19 [ 7.892966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.892968] usb usb40m] Found device /dev/t: ProdtyS0. uct: OHCI PCI host controller [ 7.892970] usb usb4: Manufacturer: Linux 5.19.0-rc1 ohci_hcd [ 7.892971] usb usb4: SerialNumber: 0000:00:16.0 [ 7.912273] hub 4-0:1.0: USB hub found [ 7.912307] hub 4-[ 7.892966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.892968] u0:s1b usb4: Product.: OHCI PCI host0controller : 4 ports detected [ 7.915810] us[ 7.892970] usb usb4: Manufacturer: Linux 5.19.0-rc1 ohci_hcd [ 7.892971] usb usb4: SerialNumber: 0000:00:16.0 b usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19 [ 7.915817[ 7.912273] hub 4-0:1.0: USB hub found [ 7.912307] h] uub 4-0:1.0: 4 posrbts detected 7.915810] udevice strings: Mfr=3, Product=2, SerialNumber=1[ sb usb7: New US[ device found, d Vendor=1d6b, iP roduct=0001, bdDevice= 5.19 7.915822] usb usb7: Product: OHCI PCI host controller [ 7.[ 7.915817] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 915825] usb usb7: Manufacturer: Linux 5.19.0-rc1 ohci_hcd [ 7.915827] usb usb7: SerialNumber: 0000:00:14.5 [ 7.916478] hub 7-0:1.0: USB hub found [ 7.916512] hub 7-0:1.0: 2 ports detected [ 7.917446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19 [ OK 7.917[ 7.915822] u4sb usb7: Produc:5 OHCI PCI host1c]ontroller usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.917455] usb usb5: Product: OHCI PCI host controller [ 7.917458] usb usb5: Manufacturer: Linux 5.19.0-rc1 ohci_hcd [ 7.917461] us0m] Stopped Network Name Resolutionb usb5: Seria. lNumber: 0000:00:12.0 [ 7.918007] hub 5-0:1.0: USB h[u 7.915825] ubs b usb7: Manufacfoturer: Linux 5.1u9.0-rc1 ohci_hcn d [ 7.918040] hub 5-0:1.0: 5 ports detected [ 7.919178] usb usb6: New USB device found, idVendor=1d6[ 7.915827] usb usb7: SerialNumber: 0000:00:14.5 b, idProduct=0001, bcdDevice= 5.19 [ 7.919184] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.919188[ 7.916478] hub 7-0:1.0: USB hub found ] usb usb6: Product: OHCI PCI host controller [ 7.919191] usb usb6:[ 7.916512] hub 7-0:1.0: 2 ports detected Manufacturer: Linux 5.19.0-rc1 ohci_hcd [ 7.919193] usb usb6: SerialNumber: 0000:00:13.0 [ 7.919705] hub 6-0:1.0: USB hub found [ 7.919740] hub 6-0:1.0: 5 ports detected [ 8.164617] 1 Startin[ 7.917446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19 g Network Name Resolution... [ 8.164638] 1 [ 8.164683] 2 [ 7.917451] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.164687] 2 [ 8.165715] 3 [ 8.165718] 4 [ 8.165718] 5 [ 8.165719] 7 [ 8.16[ 7.917455] usb usb5: Product: OHCI PCI host controller 5721] 8 [ 8.165722] 9 [ 7.917458] usb usb5: Manufacturer: Linux 5.19.0-rc1 ohci_hcd [ 8.165722] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 8.16[ 7.917461] usb usb5: SerialNumber: 0000:00:12.0 [ OK 7.918007] hub 5-0:1.0: USB hub found 0m] Stopped Network Tim728] 3 [ 8.165728] 4 [ 8.165729e Synchronization. ] 5 [ 8.165729] 7 [ 8.165731] 8 [ [ 7.918040] hub 5-0:1.0: 5 ports detected [ 7.919178] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19 8.165731] 9 [ 8.228716] usb 5-1: new low-speed USB device number 2 using ohci-pci [ 8.248915] input: HDA ATI HDMI HDMI/DP,pcm=3 as /dev[ 7.919184] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ices/pci0000:00/0000:00:01.1/sound/card0/input1 [ 8.258295] input: HDA ATI HDMI HDMI/DP,pcm=7 as [ 7.919188] usb usb6: Product: OHCI PCI host controller /devices/pci0000:00/0000:00:01.1/sound/card0/input2 [ 8.259646] snd_hda_co[ 7.919191] usb usb6: Manufacturer: Linux 5.19.0-rc1 ohci_hcd dec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 [ 8.264868] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line [ 8.264874] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Startin[ 7.919193] usb usb6: SerialNumber: 0000:00:13.0 g Network Time Synchron[ 7.919705] hub 6-0:1.0: USB hub found ization... [ 7.919740] hub 6-0:1.0: 5 ports detected [ 8.264876] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.264879] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x[ 8.164617] 1 [ 8.164638] 1 0 [ 8.264880] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 8.264881] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.264883] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 8.264885] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 8.164683] 2 [ 8.164687] 2 [ 8.165715] 3 [FAILED[ 8.165718] 4 [ Failed to [ 8.165718] 5 _ 8.264886] start Nsnd_hda_codeetwork Name Reso[c 8.165719] realtek hdaudioC1D0: Line=0x1a [ 8.264888] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c [ 8.318275] r8169 0000:04:00.0: enabling device (0000 -> 0003) [ 8.386495] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input3 [ 8.386911] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4 [ 8.387268] input: HD-Audio Generic Line as /devices/pci0000:00/lution. 0000:00:14.2/sound/card1/input[ 8.165721] 8 [ 8.165722] 95 [ 8.387630] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 See 'systemctl s[ 8.165722] snd_hda_intel 0000:00:01.1: Force to non-snoop mode tatus systemd-re[ 8.387994] input: HD-Audio Generic Line Out Susolved.service' [ 8.165728] 3 [ 8.165728] 4 for details. [ 8.165729] 5 [ 8.165729] 7 rround as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [ 8.388346] in[ 8.165731] 8 [ 8.165731] 9 [ 8.228716] usb 5-1: new low-speed USB device number 2 using ohci-pci put: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 8.388684] input[ 8.248915] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1 : HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 8.389046] input: HD-Audio Ge[ 8.258295] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2 neric Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10[ 8.259646] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 [ 8.457766] usb 5-1: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01 [ 8.457776] usb 5-1: New USB device strings: [ 8.264868] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line Mfr=1, Product=2, SerialNumber=0 [ 8.457780] usb 5-1: Product: Dell QuietKey Keyboard [ 8.457783] usb 5-1: Manufacturer: DELL [ 8.465591] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:413C:2106.0001/input/input11 [ 8.498198] r8169 0000:04[ 8.264874] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [FAILED:00.0 eth0: RTL8168f/8111f, 08:60:6e:74:7a:51, XID 480, IRQ 29 [ 8.4] Failed to [ 8.264876] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) start N98204] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, txetwork Time Sync[ 8.264879] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 hronization. checksumming: ko] [ 8.525541 [ 8.264880] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 ] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10[ 8.264881] snd_hda_codec_realtek hdaudioC1D0: inputs: Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:12.0-1/input0 [ [ 8.264883] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 8.945901] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 8.9459[ 8.264885] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 44] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 9.037194] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 9.049195] xhci_hcd 0000:03:00.0: xHCI Host Controller h 9.049215[ 8.264886] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a] x ci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 9.049230] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 9.052872] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 9.052876] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.052878] usb usb8: Product: xHCI Host Controller [ 9.052880] usb usb8: Manufacturer: Linux 5.19.0-rc1 xhci-hcd [ 9.052881] usb usb8: SerialNumber: 0000:03:00.0 [ 9.074611] usb 5-2: new low-speed USB device number 3 using ohci-pci tek hdaudioC1D0hub 8-0:1.0: USB hub See 'systemctl s[ 8.264888] sfonud_hda_codec_reandl [ 9.088806] hub 8-0:1.tatus systemd-ti[ 8.318275] r08:169 0000:04:00. 2 0p: enabling devicoe (0000 -> 000rts) detected [ 9.092782] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.092914] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdmesyncd.service'[ 8.386495] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input3 for details. [ 8.386911] input: HD-Audio Generic Front Mic as /devices/pci0D000:00/0000:00e14.2/sound/cardvi/cinput4 e= 5.19 [ 9.092917] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ OK [ 8.387268] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 0m] Stopped usb usb9:1;39mNetwork Nam P[r 8.387630] iodnuput: HD-Audio Gceneric Line Outt:F ront as /devicexHsC/pci0000:00/0000:00:14.2/sound/card1/input6 I Host Controller [ 9.092920] usb usb9: Manufactue Resolution[ 8.387994] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/r0e000:00:14.2/sour: nd/Lird1/input7 nux 5.19.0-rc1 xhci-hcd [ 9.092922] usb usb9: SerialNumber: 0000:03:00.0 [ 9.093497] [drm] radeon kernel modesetting enabled. [ 9.105658] hub 9-0:1.0: USB hub found [ 9.105694] hub 9-0:1.0: 2 ports detected [ 9.18. 1032] [drm] initializing kernel modese[ 8.388346] input: HD-Audio Gtetneric Line Out ingC LFE as /devices(/Apci0000:00/0000R:00:14.2/sound/caUrd1/input8 BA 0x1002:0x9996 0x1002:0x9996 0x00). [ 9.181038] radeon 0000:00:01.0: vram limit (0) must be a power of [ 8.388684] i2 [nput: HD-Audio G eneric Line Out S ide as /devices9.1/8pci0000:00/000011:000:14.2/sound/c5a]rd1/input9 ATOM BIOS: 113 [ 9.181201] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 9.181205] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF [ 9.181213] [drm] Detected VRAM RAM=512M, BAR=256M [ 9.181214] [drm] RAM width 64bits DDR [ 9.181337] [drm] radeon: 512M of VRAM memory ready [ 9.181342] [drm] radeon: 1024M of GTT memory ready. [ 9.181400] [drm] Loading ARUBA Microcode [ 9.233005] [drm] Internal thermal controller without fan control [ 9.233442] [drm] radeon: dpm initialized [ 9.255803] r8169 0000:04:00.0 enp4s0: renamed from eth0 ce found, idVendor=046d, idProduct=c016, bcdDevice= 3.40o eneric Front Hea dphone as /deviUSBe s/pci0000:00/00de0v0:00:14.2/sound/icard1/input10 [ 9.325920] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.457766] usb 5-2: Product: Optical USB Mouse b 5-1: New USBd[evice found, i V endor=413c, idPr9oduct=2106, bcD.evice= 1.01 e25963] usb 5-2: Manufactu[ 8.457776] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0r r: Logitech [ 9.327921] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 9.327977] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 9.346142] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 [ 9.349343] [drm] GART: Done restoring entries [ [ 8.457780] usb 5-1: Product: Dell QuietKey Keyboard 9.349347] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). Starting Netwo[ 8.457783] usb 5-1: Manufact[ urer: DELL 9.349646] radeon 0000:00:01.0: WB erk Name Resoluti[ 8.465591] input: DELL Dell QuietKey Keyboarnabld as /devices/pcie0000:00/0000:0d:12.0/usb5/5-1/ -[1:1.0/0003:413C :2106.0001/input/input11 on... 9.349651] radeon 0000:00:01.0: fence driv[e 8.498198] rr 8o169 0000:04:00.n r0 eth0: RTL8168fing /8111f, 08:60:6e:074:7a:51, XID 80, IRQ 29 use gpu addr 0x0000000020000c00 [ 9.350157] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 9.45604[ 8.498204] r8169 0000:04:00.0 eth0: jumbo fe8] atures [frames: r9a194 bytes, tx cdheecksumming: ko]on 0000:00:01.0: fence driver on [ OK ] Stopped 8.525541] hid-generic 0003:4r13C:2106.0001:iinput,hidraw0: SnB HID v1.10 Keg 6b oard [DELL Dellus eQuietKey Keyboa rd] on usb-0000g00:12.0-1/inputpu addr 0x0000000020000c18 [ 9.456055] radeon 0000:00:01.0: fence driver on ring 7 use 1;39mNetwork Tim[ 8.945901] xhci_hcd 0000:03:00.0: xHCI Host Controller e Synchronizatio[ 8.945944] xghci_hcd 0000:03p00.0: new USB bu as registered, asddsrigned bus number 8 0n. [ 9.037194] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00000000000x80000 0000000020000c1c [ 9.456060] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 [ 9.456063] radeon 0000:00:01.0: fence driv[ 9.049195] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 9.049215] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 er on ring 2 use gpu addr 0x0000000020000c08 Starting Network Time Synchron[ 9.049230] xhci_hcd 0000:03:00.0: Host supports USB 3.0 Supe[ r Speed 9.456067] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c [ 9.456070] raization... [ 9.052872] usb usb8: New USB device found, idVendor=1d6b, iddeoProduct=0002, bcn 0dDevice= 5.19 [ 9.052876] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 [ 9.588927] radeon 0000:00:01.0: radeon: MSI limited to 32-bit [FAILED[] Failed to [ 9.052878] us9b usb8: Produc: xHCI Host Controller start N.8080etwork Name Resolution. 03] radeon 0000:0[ 9.052880] usb usb8: Manufacturer: Linux 5.109:.0-rc1 xhci-hcd01. : radeon: using MSI. [ 9.808109] [drm] radeon: irq initialized. [ 9.052881] usb usb8: SerialNumber: 0000:03:00.0 [ 9.867660] [drm] ring test on 0 succeeded in 3 usecs See 'systemctl status systemd-re[[ 9.074611] s b 5-2: new low- s9peed USB device.8 6number 3 using 76o7hci-pci solved.service' for details. [ 9.081182] h0ub 8-0:1.0: USB] h[ub found [ 9.088806] hdub 8-0:1.0: 2 prts detected [ 9.092782] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. rm] ring test on 3 succeeded in 4 usecs [ 9.867677] [drm] ring test on 4 succeeded in 3 usecs [ 9.935689] [drm] ring test on 5 succeeded in 1 usecs [ 9.938100] [drm] UV[ 9.092914] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19 D initialized successfully. [FAILED[ 10[ 9.092917] usb usb9: New USB. device strings01 5Mfr=3, Product=23, SerialNumber81 3] input: Logitech Optical USB Mouse as /devices/pc] Failed to start Network Time Synci0000:00/0000:00:12.0/usb5/5-[2 9.092919] u/sb usb9: Produc5-2:: xHCI Host Cont1r.oller hronization. 0 9.092920] u0/s0b usb9: Manufact0urer: Linux 5.039:.0-rc1 xhci-hcd 46D:C016.0002/input/input12 [ 10.016009] hid-generic 0003:046D:C016.[ 9.092922] usb usb9: SerialNumber: 0000:03:00.0 0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0 See 'systemctl s[ 10.074241] r8169 000tatus systemd-ti[ 9.093497] [drm] radeon kerne0l modesetting :04:nabled. 00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed wimesyncd.service' for details. th error [ 9.105658] hu-b 9-0:1.0: USBh2ub found [ 10.074247] r8169 0000:04:00.0: Unable to l[ 9.105694] hoaudb 9-0:1.0: 2 po frts detected irmware rtl_nic/rtl8168f-1.fw (-2) [ 10.080395] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, ir[ 9.181032] [drm] initializing kernel modesetqting (ARUBA 0x1=02:0x9996 0x100MA:C0x9996 0x00). ) [ 10.193586] r8169 0000:04:00.0 enp4s0: Link is Down [ OK 9.181038] radeon 0000:00:01.0: vram limit (0) must be a power of 2 0m] Stopped Network Nam[ 9.181105] ATOM BIOS: 113 e Resolution[ 9.181201] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) . [ OK 9.181205] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF 0m] Stopped 9.181213] [drm] Detected VRAM RAM=512M, BAR=256M 1;39mNetwork Tim[ 9.181214] [drm] RAM width 64bits DDR e Synchronizatio[ 9.181337] [drm] radeon: 512M of VRAM memory ready n. Startin[ 9.181342] [drm] radeon: 1024M of GTT memory ready. g Netwo[ 9.181400] [drm] Loading ARUBA Microcode rk Name Resoluti[ 9.233005] [drm] Internal thermal controller without fan control on... Startin[ 9.233442] [drm] radeon: dpm initialized g Netwo[ 9.255803] r8169 0000:04:00.0 enp4s0: renamed from eth0 rk Time Synchron[ 9.325891] usb 5-2: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 ization... [ 9.325920] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.325943] usb 5-2: Product: Optical USB Mouse [ 10.423991] [drm] ring test on 6 succeeded in 18 usecs [ 10.424002] [drm] ring test on 7 succeeded in 3 usecs initialized successfully..325963] u VsCb 5-2: ManufactuErer: Logitech [ 10.424380] [drm] ib test on ring 0 succeeded in 0 usecs [ 10.424440] [drm] ib test on ring 3 succeeded in 0 usecs [ 10.424494] [drm] ib test on ring 4 succeeded in 0 usecs [ 10.429740[FAILED[] 9.327921] d rm] Found VCE irmware/feedback[d rversion 50.0.1 m/] 17! ib test on ring 5 succeeded [ 10.460737] [drm] ib test on ring 6 succeeded in 1 usecs ] Failed to [ 9.327977] [drm] GART: num cpu pages 262144, num gpu pages 262144 start N[ 9.346142] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 etwork Name Reso[ 9.349343] [drm] GART: Done restoring entrie[s 10.493299] [drm] ib test on ring 7 succeeded in 1 usecs [ 1lution. [ 9.349347] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). [ 9.349646] radeon 0000:00:01.0: WB enabled 0.496411] [drm] Radeon Display Connectors [ 10.496414] [drm] Connector 0: [ [ 9.349651] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 10.496416] [drm] DP-1 [ 10.496418] [drm] HPD1 [ 10.496419[ 9.350157] ra]deon 0000:00:0. 0: fence drive[ on ring 5 use drpmu addr 0x0000000]000075a18 DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 10.496423] [drm] Encoders: [ 10.496424] [drm] DFP1: INTERNAL_UNIPHY2 [ 10.496426] [drm] Connector 1: [ 10.496428] [drm] VGA-1 [ 10.496428] [drm] HPD2 [ 10.496430] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 10.496433] [drm] Encoders: [ 10.496435] [drm] CRT1: INTERNAL_UNIPHY2 [ 10.496436] [drm] CRT1: NUTMEG [ 10.496437] [drm] Connector 2: [ 10.496438] [drm] HDMI-A-1 [ 10.496440] [drm] HPD3 [ 10.496440] [drm] DDC: 0x6550 0x6550 0[ 9.456048] rx6a5deon 0000:00:015.0: fence drive4 on ring 6 use 0xpu addr 0x00000006020000c18 554 0x6558 0x6558 0x655c 0x655c [ 10.496444] [drm] Encoders: [ 10.496445] [drm] DFP2: INTERNAL_UNIPHY See 'systemctl s[ 9.456055] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c tatus systemd-re[ 9.456060] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 solved.service' [ 9.456063] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 for details. [ 9.456067] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c [ 9.456070] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 [ 9.588927] radeon 0000:00:01.0: radeon: MSI limited to 32-bit [ 9.808033] radeon 0000:00:01.0: radeon: using MSI. [ 9.808109] [drm] radeon: irq initialized. [ 9.867660] [drm] ring test on 0 succeeded in 3 usecs [FAILED[ 9.867670] [drm] ring test on 3 succeeded in 4 usecs ] Failed to [ 9.867677] [drm] ring test on 4 succeeded in 3 usecs start N[ 9.935689] [drm] ring test on 5 succeeded in 1 usecs etwork Time Sync[ 9.938100] [drm] UVD initialized successfully. [ 10.015383] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:046D:C016.0002/input/input12 hronization.[ 10.016009] hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0 [ 10.717177] radeon 0000:00:01.0: [drm] Cannot find any crtc or sizes [ 10.074241] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2 [ 10.074247] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8168f-1.fw (-2) [ 10.080395] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC) [ 10.193586] r8169 0000:04:00.0 enp4s0: Link is Down See 'systemctl s[ [ 10.423991] [10.d7rm] ring test o672n 6 succeeded in84 ]18 usecs [drm] tatus systemd-tiInitialized radeon 2.50.0 20080528 for 0[0 10.424002] [d0rm] ring test 0n 7 succeeded i: 3 usecs 00:01.0 on minor 0 mesyncd.service'[ 10.424004] [drm] VCE initialized successfully. for details. [ 10.424380] [drm] ib test on ring 0 succeeded in 0 usecs [ 10.424440] [drm] ib test on ring 3 succeeded in 0 usecs [ 10.424494] [drm] ib test on ring 4 succeeded in 0 usecs [ 10.429740] [drm] ib test on ring 5 succeeded [ 10.460737] [drm] ib test on ring 6 succeeded in 1 usecs [ 10.493299] [drm] ib test on ring 7 succeeded in 1 usecs [ 10.496411] [drm] Radeon Display Connectors [ OK 10.496414] [drm] Connector 0: 0m] Stopped 10.496416] [drm] DP-1 1;39mNetwork Nam[ 10.496418] [drm] HPD1 e Resolution[ 10.496419] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c . [ 10.496423] [drm] Encoders: [ 10.496424] [drm] DFP1: INTERNAL_UNIPHY2 [FAILED] Failed to [ 10.496426] [drm] Connector 1: start N[ 10.496428] [drm] VGA-1 etwork Name Reso[ 10.496428] [drm] HPD2 lution. [ 10.496430] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 10.496433] [drm] Encoders: [ 10.496435] [drm] CRT1: INTERNAL_UNIPHY2 [ 10.496436] [drm] CRT1: NUTMEG [ 10.496437] [drm] Connector 2: [ 10.496438] [drm] HDMI-A-1 [ 10.496440] [drm] HPD3 [ 10.496440] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c See 'systemctl s[ 10.496444] [drm] Encoders: tatus systemd-re[ 10.496445] [drm] DFP2: INTERNAL_UNIPHY solved.service' [ 10.717177] radeon 0000:00:01.0: [drm] Cannot find any crtc or sizes for details. [ 10.767284] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Reached target System Initialization. [ OK ] Started Daily autocommit of changes in /etc directory. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily dpkg database backup timer. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on OpenBSD Secure Shell server socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State... [ OK ] Started Regular background program processing daemon. Starting D-Bus System Message Bus... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting User Login Management... Starting Permit User Sessions... [ OK ] Finished Save/Restore Sound Card State. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Sound Card. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Rotate log files... [FAILED] Failed to start Rotate log files. See 'systemctl status logrotate.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ 11.848295] radeon 0000:00:01.0: [drm] Cannot find any crtc or sizes [ 11.848295] radeon 0000:00:01.0: [drm] Cannot find any crtc or sizes [ 12.167759] [drm] amdgpu kernel modesetting enabled. [ 12.167759] [drm] amdgpu kernel modesetting enabled. [ [ 12.376698] r andom: crng ini done 12.376698] random: crng init done [ OK ] Started D-Bus System Message Bus. [ OK ] Started User Login Management. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. [[ 12.871163] r 8 169 0000:04:00.10 enp4s0: Link 2s. Up - 1Gbps/Ful87l - flow control 1rx/tx [ 12.871179] IP1v6: ADDRCONF(N6TDEV_CHANGE): e3p4s0: link becoe]s ready r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.871179] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready