Nick: Bimba
E-mail: none
Board: X230 i7
Contents: 
flashrom v1.2 on Linux 5.4.0-91-generic (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found chipset "Intel QM77".
Enabling flash write... SPI Configuration is locked down.
PR1: Warning: 0x00b40000-0x00bfffff is read-only.
PR2: Warning: 0x00b10000-0x00b10fff is read-only.
PR3: Warning: 0x00ad0000-0x00adefff is read-only.
PR4: Warning: 0x00800000-0x00aaffff is read-only.
At least some flash regions are write protected. For write operations,
you should use a flash layout and include only writable regions. See
manpage for more details.
Enabling hardware sequencing due to multiple flash chips detected.
OK.
Found Programmer flash chip "Opaque flash chip" (12288 kB, Programmer-specific) mapped at physical address 0x0000000000000000.
Reading ich descriptor... done.
Using region: "bios".
Reading old flash chip contents... done.
Erasing and writing flash chip... Transaction error between offset 0x00800000 and 0x00800fff (= 0x00800000 + 4095)!
Reading current flash chip contents... done. Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Apparently at least some data has changed.
Your flash chip is in an unknown state.
Get help on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org with the subject "FAILED: <your board name>"!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!