Nick: ROUGE13
E-mail: none
Board: ch341a_spi
Contents: 
flashrom v1.2 on Linux 5.4.0-89-generic (x86_64)
flashrom was built with libpci 3.5.2, GCC 7.5.0, little endian
Command line (8 args): flashrom --programmer ch341a_spi --read R4CMori_01.bin --chip GD25Q127C/GD25Q128C -o logfile.txt
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing ch341a_spi programmer
Device revision is 3.0.4
The following protocols are supported: SPI.
Probing for GigaDevice GD25Q127C/GD25Q128C, 16384 kB: 
cb_out: error: LIBUSB_TRANSFER_TIMED_OUT

cb_in: error: LIBUSB_TRANSFER_TIMED_OUT
ch341a_spi_spi_send_command: Failed to write 37 bytes
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.

cb_out: error: LIBUSB_TRANSFER_TIMED_OUT
enable_pins: Failed to write 4 bytes
Could not disable output pins.