Nick: anonymous E-mail: none Board: unknown Contents: Loading Linux linux54 ... Loading initial ramdisk ... Linux version 5.4.72 (user@) (gcc version 10.1.0 (GCC)) #1 SMP Sun Oct 25 08:03:46 MSK 2020 Command line: BOOT_IMAGE=/boot/vmlinuz-linux54 root=UUID=81be9732-503b-4c1e-81d6-1ddded7d3047 rw loglevel=8 initcall_debug console=tty0 console=ttyS0,115200 x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format. BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000007aa73fff] usable BIOS-e820: [mem 0x000000007aa74000-0x000000007fffffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed80000-0x00000000fed84fff] reserved BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable NX (Execute Disable) protection: active SMBIOS 3.0 present. DMI: ASUS PRIME H310M-C R2.0/PRIME H310M-C R2.0, BIOS 4.12-2121-gd87b6acc54-dirty 10/25/2020 tsc: Detected 3700.000 MHz processor tsc: Detected 3699.850 MHz TSC e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x27f000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0000000000 mask 7F80000000 write-back 1 base 007B000000 mask 7FFF000000 uncachable 2 base 007C000000 mask 7FFC000000 uncachable 3 base 0080000000 mask 7FF0000000 write-combining 4 base 0100000000 mask 7F00000000 write-back 5 base 0200000000 mask 7F80000000 write-back 6 disabled 7 disabled 8 disabled 9 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT last_pfn = 0x7aa74 max_arch_pfn = 0x400000000 check: Scanning 1 areas for low memory corruption Using GB pages for direct mapping RAMDISK: [mem 0x36fd1000-0x377dffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4) ACPI: XSDT 0x000000007AA9A0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20200528) ACPI: FACP 0x000000007AA9CEE0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200528) ACPI: DSDT 0x000000007AA9A280 002C56 (v02 COREv4 COREBOOT 20110725 INTL 20200528) ACPI: FACS 0x000000007AA9A240 000040 ACPI: FACS 0x000000007AA9A240 000040 ACPI: SSDT 0x000000007AA9D000 000D30 (v02 COREv4 COREBOOT 0000002A CORE 20200528) ACPI: MCFG 0x000000007AA9DD30 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200528) ACPI: APIC 0x000000007AA9DD70 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200528) ACPI: DMAR 0x000000007AA9DDE0 000088 (v01 COREv4 COREBOOT 00000000 CORE 20200528) ACPI: HPET 0x000000007AA9DE70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200528) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000027effffff] NODE_DATA(0) allocated [mem 0x27effc000-0x27effffff] Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000027effffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000007aa73fff] node 0: [mem 0x0000000100000000-0x000000027effffff] Zeroed struct page in unavailable ranges: 26094 pages Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff] On node 0 totalpages: 2071058 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 7786 pages used for memmap DMA32 zone: 498292 pages, LIFO batch:63 Normal zone: 24512 pages used for memmap Normal zone: 1568768 pages, LIFO batch:63 Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] ACPI: PM-Timer IO Port: 0x1808 ACPI: Local APIC address 0xfee00000 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 TSC deadline timer available smpboot: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] PM: Registered nosave memory: [mem 0x7aa74000-0x7fffffff] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] PM: Registered nosave memory: [mem 0xfe000000-0xfe00ffff] PM: Registered nosave memory: [mem 0xfe010000-0xfed0ffff] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] PM: Registered nosave memory: [mem 0xfed1a000-0xfed7ffff] PM: Registered nosave memory: [mem 0xfed80000-0xfed84fff] PM: Registered nosave memory: [mem 0xfed85000-0xfed8ffff] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] [mem 0x80000000-0xdfffffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 50 pages/cpu s167064 r8192 d29544 u524288 pcpu-alloc: s167064 r8192 d29544 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists, mobility grouping on. Total pages: 2038675 Policy zone: Normal Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux54 root=UUID=81be9732-503b-4c1e-81d6-1ddded7d3047 rw loglevel=8 initcall_debug console=tty0 console=ttyS0,115200 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 8037024K/8284232K available (14340K kernel code, 1336K rwdata, 3216K rodata, 1316K init, 1076K bss, 247208K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Kernel/User page tables isolation: enabled rcu: Hierarchical RCU implementation. rcu: RCU event tracing is enabled. rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16 random: get_random_bytes called from start_kernel+0x304/0x4cf with crng_init=0 calling con_init+0x0/0x21d @ 0 Console: colour dummy device 80x25 printk: console [tty0] enabled initcall con_init+0x0/0x21d returned 0 after 0 usecs calling univ8250_console_init+0x0/0x22 @ 0 printk: console [ttyS0] enabled initcall univ8250_console_init+0x0/0x22 returned 0 after 0 usecs ACPI: Core revision 20190816 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns APIC: Switch to symmetric I/O mode setup ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing SELinux: Initializing. Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) mce: CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Mitigation: Full generic retpoline Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Spectre V2 : Enabling Restricted Speculation for firmware calls Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp SRBDS: Mitigation: Microcode MDS: Mitigation: Clear CPU buffers Freeing SMP alternatives memory: 40K smpboot: CPU0: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa) calling trace_init_flags_sys_enter+0x0/0xa @ 1 initcall trace_init_flags_sys_enter+0x0/0xa returned 0 after 0 usecs calling trace_init_flags_sys_exit+0x0/0xa @ 1 initcall trace_init_flags_sys_exit+0x0/0xa returned 0 after 0 usecs calling init_hw_perf_events+0x0/0x4f9 @ 1 Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f initcall init_hw_perf_events+0x0/0x4f9 returned 0 after 7812 usecs calling init_real_mode+0x0/0x1cc @ 1 initcall init_real_mode+0x0/0x1cc returned 0 after 0 usecs calling trace_init_perf_perm_irq_work_exit+0x0/0xe @ 1 initcall trace_init_perf_perm_irq_work_exit+0x0/0xe returned 0 after 0 usecs calling validate_x2apic+0x0/0x46 @ 1 initcall validate_x2apic+0x0/0x46 returned 0 after 0 usecs calling register_nmi_cpu_backtrace_handler+0x0/0x11 @ 1 initcall register_nmi_cpu_backtrace_handler+0x0/0x11 returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x34 @ 1 initcall spawn_ksoftirqd+0x0/0x34 returned 0 after 0 usecs calling migration_init+0x0/0x2f @ 1 initcall migration_init+0x0/0x2f returned 0 after 0 usecs calling srcu_bootup_announce+0x0/0x2b @ 1 rcu: Hierarchical SRCU implementation. initcall srcu_bootup_announce+0x0/0x2b returned 0 after 976 usecs calling rcu_spawn_core_kthreads+0x0/0x74 @ 1 initcall rcu_spawn_core_kthreads+0x0/0x74 returned 0 after 0 usecs calling rcu_spawn_gp_kthread+0x0/0x112 @ 1 initcall rcu_spawn_gp_kthread+0x0/0x112 returned 0 after 0 usecs calling check_cpu_stall_init+0x0/0x16 @ 1 initcall check_cpu_stall_init+0x0/0x16 returned 0 after 0 usecs calling rcu_sysrq_init+0x0/0x1d @ 1 initcall rcu_sysrq_init+0x0/0x1d returned 0 after 0 usecs calling cpu_stop_init+0x0/0x6c @ 1 initcall cpu_stop_init+0x0/0x6c returned 0 after 0 usecs calling init_events+0x0/0x39 @ 1 initcall init_events+0x0/0x39 returned 0 after 0 usecs calling init_trace_printk+0x0/0xc @ 1 initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs calling event_trace_enable_again+0x0/0x1f @ 1 initcall event_trace_enable_again+0x0/0x1f returned 0 after 0 usecs calling jump_label_init_module+0x0/0xc @ 1 initcall jump_label_init_module+0x0/0xc returned 0 after 0 usecs calling mce_amd_init+0x0/0x1c9 @ 1 initcall mce_amd_init+0x0/0x1c9 returned -19 after 0 usecs calling efi_memreserve_root_init+0x0/0x21 @ 1 initcall efi_memreserve_root_init+0x0/0x21 returned 0 after 0 usecs calling efi_earlycon_remap_fb+0x0/0x49 @ 1 initcall efi_earlycon_remap_fb+0x0/0x49 returned 0 after 0 usecs calling initialize_ptr_random+0x0/0x49 @ 1 initcall initialize_ptr_random+0x0/0x49 returned 0 after 0 usecs smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. #2 #3 smp: Brought up 1 node, 4 CPUs smpboot: Max logical packages: 1 smpboot: Total of 4 processors activated (29598.80 BogoMIPS) devtmpfs: initialized calling ipc_ns_init+0x0/0x3b @ 1 initcall ipc_ns_init+0x0/0x3b returned 0 after 0 usecs calling init_mmap_min_addr+0x0/0x22 @ 1 initcall init_mmap_min_addr+0x0/0x22 returned 0 after 0 usecs calling pci_realloc_setup_params+0x0/0x37 @ 1 initcall pci_realloc_setup_params+0x0/0x37 returned 0 after 0 usecs calling net_ns_init+0x0/0x10c @ 1 initcall net_ns_init+0x0/0x10c returned 0 after 0 usecs calling e820__register_nvs_regions+0x0/0x33 @ 1 initcall e820__register_nvs_regions+0x0/0x33 returned 0 after 0 usecs calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1 initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs calling reboot_init+0x0/0x38 @ 1 initcall reboot_init+0x0/0x38 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x1c @ 1 initcall init_lapic_sysfs+0x0/0x1c returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0x3 @ 1 initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs calling cpu_hotplug_pm_sync_init+0x0/0xf @ 1 initcall cpu_hotplug_pm_sync_init+0x0/0xf returned 0 after 0 usecs calling wq_sysfs_init+0x0/0x26 @ 1 initcall wq_sysfs_init+0x0/0x26 returned 0 after 0 usecs calling ksysfs_init+0x0/0x94 @ 1 initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs calling pm_init+0x0/0x6e @ 1 initcall pm_init+0x0/0x6e returned 0 after 0 usecs calling pm_disk_init+0x0/0x13 @ 1 initcall pm_disk_init+0x0/0x13 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x20 @ 1 initcall swsusp_header_init+0x0/0x20 returned 0 after 0 usecs calling rcu_set_runtime_mode+0x0/0xd @ 1 initcall rcu_set_runtime_mode+0x0/0xd returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x13 @ 1 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns initcall init_jiffies_clocksource+0x0/0x13 returned 0 after 976 usecs calling futex_init+0x0/0xed @ 1 futex hash table entries: 1024 (order: 4, 65536 bytes, linear) initcall futex_init+0x0/0xed returned 0 after 976 usecs calling cgroup_wq_init+0x0/0x24 @ 1 initcall cgroup_wq_init+0x0/0x24 returned 0 after 0 usecs calling cgroup1_wq_init+0x0/0x24 @ 1 initcall cgroup1_wq_init+0x0/0x24 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x33 @ 1 initcall init_zero_pfn+0x0/0x33 returned 0 after 0 usecs calling fsnotify_init+0x0/0x44 @ 1 initcall fsnotify_init+0x0/0x44 returned 0 after 0 usecs calling filelock_init+0x0/0x93 @ 1 initcall filelock_init+0x0/0x93 returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x2c @ 1 initcall init_misc_binfmt+0x0/0x2c returned 0 after 0 usecs calling init_script_binfmt+0x0/0x11 @ 1 initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x11 @ 1 initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x11 @ 1 initcall init_compat_elf_binfmt+0x0/0x11 returned 0 after 0 usecs calling debugfs_init+0x0/0x51 @ 1 initcall debugfs_init+0x0/0x51 returned 0 after 0 usecs calling tracefs_init+0x0/0x38 @ 1 initcall tracefs_init+0x0/0x38 returned 0 after 0 usecs calling prandom_init+0x0/0xc5 @ 1 initcall prandom_init+0x0/0xc5 returned 0 after 0 usecs calling iommu_init+0x0/0x26 @ 1 initcall iommu_init+0x0/0x26 returned 0 after 0 usecs calling component_debug_init+0x0/0x18 @ 1 initcall component_debug_init+0x0/0x18 returned 0 after 0 usecs calling early_resume_init+0x0/0xb0 @ 1 PM: RTC time: 11:00:34, date: 2020-10-23 initcall early_resume_init+0x0/0xb0 returned 0 after 976 usecs calling cpufreq_core_init+0x0/0x3b @ 1 initcall cpufreq_core_init+0x0/0x3b returned 0 after 0 usecs calling cpuidle_init+0x0/0x3b @ 1 initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs calling capsule_reboot_register+0x0/0xc @ 1 initcall capsule_reboot_register+0x0/0xc returned 0 after 0 usecs calling bsp_pm_check_init+0x0/0xf @ 1 initcall bsp_pm_check_init+0x0/0xf returned 0 after 0 usecs calling sock_init+0x0/0x9a @ 1 initcall sock_init+0x0/0x9a returned 0 after 0 usecs calling net_inuse_init+0x0/0x1f @ 1 initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs calling net_defaults_init+0x0/0x1f @ 1 initcall net_defaults_init+0x0/0x1f returned 0 after 0 usecs calling init_default_flow_dissectors+0x0/0x54 @ 1 initcall init_default_flow_dissectors+0x0/0x54 returned 0 after 0 usecs calling netpoll_init+0x0/0x24 @ 1 initcall netpoll_init+0x0/0x24 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x154 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x154 returned 0 after 976 usecs calling irq_sysfs_init+0x0/0xb3 @ 1 initcall irq_sysfs_init+0x0/0xb3 returned 0 after 0 usecs calling audit_init+0x0/0x16a @ 1 audit: initializing netlink subsys (disabled) initcall audit_init+0x0/0x16a returned 0 after 976 usecs audit: type=2000 audit(1603450832.188:1): state=initialized audit_enabled=0 res=1 calling release_early_probes+0x0/0x2e @ 1 initcall release_early_probes+0x0/0x2e returned 0 after 0 usecs calling bdi_class_init+0x0/0x44 @ 1 initcall bdi_class_init+0x0/0x44 returned 0 after 0 usecs calling mm_sysfs_init+0x0/0x24 @ 1 initcall mm_sysfs_init+0x0/0x24 returned 0 after 0 usecs calling init_per_zone_wmark_min+0x0/0x71 @ 1 initcall init_per_zone_wmark_min+0x0/0x71 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x13 @ 1 initcall pcibus_class_init+0x0/0x13 returned 0 after 0 usecs calling pci_driver_init+0x0/0x1d @ 1 initcall pci_driver_init+0x0/0x1d returned 0 after 0 usecs calling backlight_class_init+0x0/0xa2 @ 1 initcall backlight_class_init+0x0/0xa2 returned 0 after 0 usecs calling tty_class_init+0x0/0x2f @ 1 initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xb6 @ 1 initcall vtconsole_class_init+0x0/0xb6 returned 0 after 0 usecs calling iommu_dev_init+0x0/0x13 @ 1 initcall iommu_dev_init+0x0/0x13 returned 0 after 0 usecs calling mipi_dsi_bus_init+0x0/0xc @ 1 initcall mipi_dsi_bus_init+0x0/0xc returned 0 after 0 usecs calling software_node_init+0x0/0x26 @ 1 initcall software_node_init+0x0/0x26 returned 0 after 0 usecs calling wakeup_sources_debugfs_init+0x0/0x1f @ 1 initcall wakeup_sources_debugfs_init+0x0/0x1f returned 0 after 0 usecs calling wakeup_sources_sysfs_init+0x0/0x2b @ 1 initcall wakeup_sources_sysfs_init+0x0/0x2b returned 0 after 0 usecs calling register_node_type+0x0/0x13 @ 1 initcall register_node_type+0x0/0x13 returned 0 after 0 usecs calling regmap_initcall+0x0/0x8 @ 1 initcall regmap_initcall+0x0/0x8 returned 0 after 0 usecs calling i2c_init+0x0/0xaf @ 1 initcall i2c_init+0x0/0xaf returned 0 after 0 usecs calling init_menu+0x0/0xc @ 1 cpuidle: using governor menu initcall init_menu+0x0/0xc returned 0 after 2929 usecs calling pcc_init+0x0/0x4f @ 1 initcall pcc_init+0x0/0x4f returned -19 after 0 usecs calling amd_postcore_init+0x0/0x116 @ 1 initcall amd_postcore_init+0x0/0x116 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0xc @ 1 initcall kobject_uevent_init+0x0/0xc returned 0 after 0 usecs calling bts_init+0x0/0xb6 @ 1 initcall bts_init+0x0/0xb6 returned -19 after 0 usecs calling pt_init+0x0/0x338 @ 1 initcall pt_init+0x0/0x338 returned 0 after 0 usecs calling boot_params_ksysfs_init+0x0/0x27c @ 1 initcall boot_params_ksysfs_init+0x0/0x27c returned 0 after 0 usecs calling sbf_init+0x0/0xca @ 1 initcall sbf_init+0x0/0xca returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x1a5 @ 1 initcall arch_kdebugfs_init+0x0/0x1a5 returned 0 after 0 usecs calling intel_pconfig_init+0x0/0x7d @ 1 initcall intel_pconfig_init+0x0/0x7d returned 0 after 0 usecs calling mtrr_if_init+0x0/0x59 @ 1 initcall mtrr_if_init+0x0/0x59 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x25 @ 1 initcall ffh_cstate_init+0x0/0x25 returned 0 after 0 usecs calling cryptomgr_init+0x0/0xc @ 1 initcall cryptomgr_init+0x0/0xc returned 0 after 0 usecs calling acpi_pci_init+0x0/0x53 @ 1 ACPI: bus type PCI registered initcall acpi_pci_init+0x0/0x53 returned 0 after 3906 usecs calling dma_channel_table_init+0x0/0xc8 @ 1 initcall dma_channel_table_init+0x0/0xc8 returned 0 after 0 usecs calling dma_bus_init+0x0/0x9f @ 1 initcall dma_bus_init+0x0/0x9f returned 0 after 0 usecs calling dmi_id_init+0x0/0x341 @ 1 initcall dmi_id_init+0x0/0x341 returned 0 after 0 usecs calling pci_arch_init+0x0/0x61 @ 1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x61 returned 0 after 21484 usecs calling init_vdso+0x0/0xf @ 1 initcall init_vdso+0x0/0xf returned 0 after 0 usecs calling sysenter_setup+0x0/0xf @ 1 initcall sysenter_setup+0x0/0xf returned 0 after 0 usecs calling fixup_ht_bug+0x0/0xeb @ 1 initcall fixup_ht_bug+0x0/0xeb returned 0 after 0 usecs calling topology_init+0x0/0x86 @ 1 initcall topology_init+0x0/0x86 returned 0 after 0 usecs calling intel_epb_init+0x0/0x6a @ 1 initcall intel_epb_init+0x0/0x6a returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x3a @ 1 initcall mtrr_init_finialize+0x0/0x3a returned 0 after 0 usecs calling uid_cache_init+0x0/0x7d @ 1 initcall uid_cache_init+0x0/0x7d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x1aa @ 1 initcall param_sysfs_init+0x0/0x1aa returned 0 after 976 usecs calling user_namespace_sysctl_init+0x0/0x2f @ 1 initcall user_namespace_sysctl_init+0x0/0x2f returned 0 after 0 usecs calling proc_schedstat_init+0x0/0x20 @ 1 initcall proc_schedstat_init+0x0/0x20 returned 0 after 0 usecs calling pm_sysrq_init+0x0/0x14 @ 1 initcall pm_sysrq_init+0x0/0x14 returned 0 after 0 usecs calling create_proc_profile+0x0/0xe0 @ 1 initcall create_proc_profile+0x0/0xe0 returned 0 after 0 usecs calling crash_save_vmcoreinfo_init+0x0/0x5d8 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x5d8 returned 0 after 0 usecs calling crash_notes_memory_init+0x0/0x34 @ 1 initcall crash_notes_memory_init+0x0/0x34 returned 0 after 0 usecs calling cgroup_sysfs_init+0x0/0x13 @ 1 initcall cgroup_sysfs_init+0x0/0x13 returned 0 after 0 usecs calling cgroup_namespaces_init+0x0/0x3 @ 1 initcall cgroup_namespaces_init+0x0/0x3 returned 0 after 0 usecs calling init_kprobes+0x0/0x156 @ 1 initcall init_kprobes+0x0/0x156 returned 0 after 0 usecs calling oom_init+0x0/0x2b @ 1 initcall oom_init+0x0/0x2b returned 0 after 0 usecs calling default_bdi_init+0x0/0xaa @ 1 initcall default_bdi_init+0x0/0xaa returned 0 after 0 usecs calling percpu_enable_async+0x0/0xa @ 1 initcall percpu_enable_async+0x0/0xa returned 0 after 0 usecs calling kcompactd_init+0x0/0x92 @ 1 initcall kcompactd_init+0x0/0x92 returned 0 after 0 usecs calling init_user_reserve+0x0/0x40 @ 1 initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs calling init_admin_reserve+0x0/0x40 @ 1 initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs calling init_reserve_notifier+0x0/0x3 @ 1 initcall init_reserve_notifier+0x0/0x3 returned 0 after 0 usecs calling swap_init_sysfs+0x0/0x63 @ 1 initcall swap_init_sysfs+0x0/0x63 returned 0 after 0 usecs calling swapfile_init+0x0/0x91 @ 1 initcall swapfile_init+0x0/0x91 returned 0 after 0 usecs calling hugetlb_init+0x0/0x4dd @ 1 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x4dd returned 0 after 976 usecs calling sel_ib_pkey_init+0x0/0x2d @ 1 initcall sel_ib_pkey_init+0x0/0x2d returned 0 after 0 usecs calling seqiv_module_init+0x0/0xc @ 1 initcall seqiv_module_init+0x0/0xc returned 0 after 0 usecs calling echainiv_module_init+0x0/0xc @ 1 initcall echainiv_module_init+0x0/0xc returned 0 after 0 usecs calling rsa_init+0x0/0x40 @ 1 initcall rsa_init+0x0/0x40 returned 0 after 0 usecs cryptomgr_test (36) used greatest stack depth: 15520 bytes left calling crypto_cmac_module_init+0x0/0xc @ 1 initcall crypto_cmac_module_init+0x0/0xc returned 0 after 0 usecs calling hmac_module_init+0x0/0xc @ 1 initcall hmac_module_init+0x0/0xc returned 0 after 0 usecs calling crypto_null_mod_init+0x0/0x68 @ 1 cryptomgr_test (38) used greatest stack depth: 15256 bytes left initcall crypto_null_mod_init+0x0/0x68 returned 0 after 0 usecs calling md5_mod_init+0x0/0xc @ 1 initcall md5_mod_init+0x0/0xc returned 0 after 0 usecs calling sha1_generic_mod_init+0x0/0xc @ 1 initcall sha1_generic_mod_init+0x0/0xc returned 0 after 0 usecs calling sha256_generic_mod_init+0x0/0x11 @ 1 initcall sha256_generic_mod_init+0x0/0x11 returned 0 after 0 usecs calling crypto_cbc_module_init+0x0/0xc @ 1 initcall crypto_cbc_module_init+0x0/0xc returned 0 after 0 usecs calling crypto_ctr_module_init+0x0/0x11 @ 1 initcall crypto_ctr_module_init+0x0/0x11 returned 0 after 0 usecs calling crypto_gcm_module_init+0x0/0x65 @ 1 initcall crypto_gcm_module_init+0x0/0x65 returned 0 after 0 usecs calling crypto_ccm_module_init+0x0/0x11 @ 1 initcall crypto_ccm_module_init+0x0/0x11 returned 0 after 0 usecs calling des_generic_mod_init+0x0/0x11 @ 1 initcall des_generic_mod_init+0x0/0x11 returned 0 after 0 usecs calling aes_init+0x0/0xc @ 1 initcall aes_init+0x0/0xc returned 0 after 0 usecs calling crc32c_mod_init+0x0/0xc @ 1 initcall crc32c_mod_init+0x0/0xc returned 0 after 0 usecs calling crypto_authenc_module_init+0x0/0xc @ 1 initcall crypto_authenc_module_init+0x0/0xc returned 0 after 0 usecs calling crypto_authenc_esn_module_init+0x0/0xc @ 1 initcall crypto_authenc_esn_module_init+0x0/0xc returned 0 after 0 usecs calling drbg_init+0x0/0x7c @ 1 initcall drbg_init+0x0/0x7c returned 0 after 0 usecs calling ghash_mod_init+0x0/0xc @ 1 initcall ghash_mod_init+0x0/0xc returned 0 after 0 usecs calling init_bio+0x0/0xa0 @ 1 initcall init_bio+0x0/0xa0 returned 0 after 0 usecs calling blk_settings_init+0x0/0x25 @ 1 initcall blk_settings_init+0x0/0x25 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x25 @ 1 initcall blk_ioc_init+0x0/0x25 returned 0 after 0 usecs calling blk_softirq_init+0x0/0x6c @ 1 initcall blk_softirq_init+0x0/0x6c returned 0 after 0 usecs calling blk_mq_init+0x0/0x25 @ 1 initcall blk_mq_init+0x0/0x25 returned 0 after 0 usecs calling genhd_device_init+0x0/0x75 @ 1 initcall genhd_device_init+0x0/0x75 returned 0 after 0 usecs calling pci_slot_init+0x0/0x40 @ 1 initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs calling fbmem_init+0x0/0xdd @ 1 initcall fbmem_init+0x0/0xdd returned 0 after 0 usecs calling acpi_init+0x0/0x30d @ 1 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) ACPI: 2 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6fff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0x27f000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:3e0f] type 00 class 0x060000 pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1 pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs pci 0000:00:02.0: [8086:3e90] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f] pci 0000:00:02.0: calling efifb_fixup_resources+0x0/0xe0 @ 1 pci 0000:00:02.0: efifb_fixup_resources+0x0/0xe0 took 0 usecs pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 pci 0000:00:14.0: reg 0x10: [mem 0x91000000-0x9100ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000 pci 0000:00:14.2: reg 0x10: [mem 0x91016000-0x91016fff 64bit] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0x91017000-0x91017fff 64bit] pci 0000:00:16.0: PME# supported from D3hot pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 pci 0000:00:17.0: reg 0x10: [mem 0x91014000-0x91015fff] pci 0000:00:17.0: reg 0x14: [mem 0x91019000-0x910190ff] pci 0000:00:17.0: reg 0x18: [io 0x1060-0x1067] pci 0000:00:17.0: reg 0x1c: [io 0x1068-0x106b] pci 0000:00:17.0: reg 0x20: [io 0x1040-0x105f] pci 0000:00:17.0: reg 0x24: [mem 0x91018000-0x910187ff] pci 0000:00:17.0: PME# supported from D3hot pci 0000:00:1f.0: [8086:a2ca] type 00 class 0x060100 pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 pci 0000:00:1f.2: reg 0x10: [mem 0x91010000-0x91013fff] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 pci 0000:00:1f.4: reg 0x10: [mem 0x9101a000-0x9101a0ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) initcall acpi_init+0x0/0x30d returned 0 after 487304 usecs calling pnp_init+0x0/0xc @ 1 initcall pnp_init+0x0/0xc returned 0 after 0 usecs calling misc_init+0x0/0xc0 @ 1 initcall misc_init+0x0/0xc0 returned 0 after 0 usecs calling iommu_subsys_init+0x0/0x4a @ 1 iommu: Default domain type: Translated initcall iommu_subsys_init+0x0/0x4a returned 0 after 4882 usecs calling vga_arb_device_init+0x0/0x25f @ 1 pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:00:02.0: vgaarb: bridge control possible vgaarb: loaded initcall vga_arb_device_init+0x0/0x25f returned 0 after 22460 usecs calling cn_init+0x0/0xd0 @ 1 initcall cn_init+0x0/0xd0 returned 0 after 0 usecs calling dma_buf_init+0x0/0xab @ 1 initcall dma_buf_init+0x0/0xab returned 0 after 0 usecs calling init_scsi+0x0/0x8a @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x8a returned 0 after 3906 usecs calling ata_init+0x0/0x317 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x317 returned 0 after 3906 usecs calling phy_init+0x0/0x246 @ 1 initcall phy_init+0x0/0x246 returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x37 @ 1 initcall init_pcmcia_cs+0x0/0x37 returned 0 after 0 usecs calling usb_common_init+0x0/0x18 @ 1 initcall usb_common_init+0x0/0x18 returned 0 after 0 usecs calling usb_init+0x0/0x133 @ 1 ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x133 returned 0 after 19531 usecs calling serio_init+0x0/0x29 @ 1 initcall serio_init+0x0/0x29 returned 0 after 0 usecs calling input_init+0x0/0xff @ 1 initcall input_init+0x0/0xff returned 0 after 0 usecs calling rtc_init+0x0/0x47 @ 1 initcall rtc_init+0x0/0x47 returned 0 after 0 usecs calling pps_init+0x0/0xab @ 1 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti initcall pps_init+0x0/0xab returned 0 after 13671 usecs calling ptp_init+0x0/0x9a @ 1 PTP clock support registered initcall ptp_init+0x0/0x9a returned 0 after 3906 usecs calling power_supply_class_init+0x0/0x3b @ 1 initcall power_supply_class_init+0x0/0x3b returned 0 after 0 usecs calling hwmon_init+0x0/0xfa @ 1 initcall hwmon_init+0x0/0xfa returned 0 after 0 usecs calling md_init+0x0/0x13c @ 1 initcall md_init+0x0/0x13c returned 0 after 0 usecs calling edac_init+0x0/0x71 @ 1 EDAC MC: Ver: 3.0.0 initcall edac_init+0x0/0x71 returned 0 after 2929 usecs calling leds_init+0x0/0x37 @ 1 initcall leds_init+0x0/0x37 returned 0 after 0 usecs calling dmi_init+0x0/0x117 @ 1 initcall dmi_init+0x0/0x117 returned 0 after 0 usecs calling efisubsys_init+0x0/0x324 @ 1 initcall efisubsys_init+0x0/0x324 returned 0 after 0 usecs calling ras_init+0x0/0xa @ 1 initcall ras_init+0x0/0xa returned 0 after 0 usecs calling nvmem_init+0x0/0xc @ 1 initcall nvmem_init+0x0/0xc returned 0 after 0 usecs calling init_soundcore+0x0/0x2f @ 1 initcall init_soundcore+0x0/0x2f returned 0 after 0 usecs calling alsa_sound_init+0x0/0x91 @ 1 Advanced Linux Sound Architecture Driver Initialized. initcall alsa_sound_init+0x0/0x91 returned 0 after 6835 usecs calling alsa_seq_device_init+0x0/0x6f @ 1 initcall alsa_seq_device_init+0x0/0x6f returned 0 after 0 usecs calling hda_bus_init+0x0/0xc @ 1 initcall hda_bus_init+0x0/0xc returned 0 after 0 usecs calling pci_subsys_init+0x0/0x5e @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0x7aa74000-0x7bffffff] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff] initcall pci_subsys_init+0x0/0x5e returned 0 after 54687 usecs calling proto_init+0x0/0xc @ 1 initcall proto_init+0x0/0xc returned 0 after 0 usecs calling net_dev_init+0x0/0x213 @ 1 initcall net_dev_init+0x0/0x213 returned 0 after 0 usecs calling neigh_init+0x0/0x80 @ 1 initcall neigh_init+0x0/0x80 returned 0 after 0 usecs calling fib_notifier_init+0x0/0xc @ 1 initcall fib_notifier_init+0x0/0xc returned 0 after 0 usecs calling init_flow_indr_rhashtable+0x0/0x13 @ 1 initcall init_flow_indr_rhashtable+0x0/0x13 returned 0 after 0 usecs calling fib_rules_init+0x0/0xad @ 1 initcall fib_rules_init+0x0/0xad returned 0 after 0 usecs calling pktsched_init+0x0/0x10e @ 1 initcall pktsched_init+0x0/0x10e returned 0 after 0 usecs calling tc_filter_init+0x0/0x107 @ 1 initcall tc_filter_init+0x0/0x107 returned 0 after 0 usecs calling tc_action_init+0x0/0x50 @ 1 initcall tc_action_init+0x0/0x50 returned 0 after 0 usecs calling genl_init+0x0/0x33 @ 1 initcall genl_init+0x0/0x33 returned 0 after 0 usecs calling nexthop_init+0x0/0xd4 @ 1 initcall nexthop_init+0x0/0xd4 returned 0 after 0 usecs calling cipso_v4_init+0x0/0x62 @ 1 initcall cipso_v4_init+0x0/0x62 returned 0 after 0 usecs calling ieee80211_init+0x0/0x25 @ 1 initcall ieee80211_init+0x0/0x25 returned 0 after 0 usecs calling netlbl_init+0x0/0x74 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x74 returned 0 after 18554 usecs calling rfkill_init+0x0/0x115 @ 1 initcall rfkill_init+0x0/0x115 returned 0 after 0 usecs calling nmi_warning_debugfs+0x0/0x22 @ 1 initcall nmi_warning_debugfs+0x0/0x22 returned 0 after 0 usecs calling save_microcode_in_initrd+0x0/0x4d @ 1 initcall save_microcode_in_initrd+0x0/0x4d returned 0 after 0 usecs calling hpet_late_init+0x0/0x211 @ 1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 24.000000 MHz counter initcall hpet_late_init+0x0/0x211 returned 0 after 13671 usecs calling init_amd_nbs+0x0/0x114 @ 1 initcall init_amd_nbs+0x0/0x114 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x3d @ 1 clocksource: Switched to clocksource tsc-early initcall clocksource_done_booting+0x0/0x3d returned 0 after 5362 usecs calling tracer_init_tracefs+0x0/0x1a9 @ 1 initcall tracer_init_tracefs+0x0/0x1a9 returned 0 after 56497 usecs calling init_trace_printk_function_export+0x0/0x2d @ 1 initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 0 usecs calling init_kprobe_trace+0x0/0x1c1 @ 1 initcall init_kprobe_trace+0x0/0x1c1 returned 0 after 1 usecs calling init_dynamic_event+0x0/0x3e @ 1 initcall init_dynamic_event+0x0/0x3e returned 0 after 0 usecs calling init_uprobe_trace+0x0/0x69 @ 1 initcall init_uprobe_trace+0x0/0x69 returned 0 after 0 usecs calling init_pipe_fs+0x0/0x45 @ 1 initcall init_pipe_fs+0x0/0x45 returned 0 after 5 usecs calling inotify_user_setup+0x0/0x43 @ 1 initcall inotify_user_setup+0x0/0x43 returned 0 after 1 usecs calling eventpoll_init+0x0/0xc5 @ 1 initcall eventpoll_init+0x0/0xc5 returned 0 after 1 usecs calling anon_inode_init+0x0/0x54 @ 1 initcall anon_inode_init+0x0/0x54 returned 0 after 2 usecs calling proc_locks_init+0x0/0x23 @ 1 initcall proc_locks_init+0x0/0x23 returned 0 after 0 usecs calling dquot_init+0x0/0x10c @ 1 VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0x10c returned 0 after 10555 usecs calling quota_init+0x0/0x1f @ 1 initcall quota_init+0x0/0x1f returned 0 after 3 usecs calling proc_cmdline_init+0x0/0x1d @ 1 initcall proc_cmdline_init+0x0/0x1d returned 0 after 0 usecs calling proc_consoles_init+0x0/0x20 @ 1 initcall proc_consoles_init+0x0/0x20 returned 0 after 0 usecs calling proc_cpuinfo_init+0x0/0x1a @ 1 initcall proc_cpuinfo_init+0x0/0x1a returned 0 after 0 usecs calling proc_devices_init+0x0/0x20 @ 1 initcall proc_devices_init+0x0/0x20 returned 0 after 0 usecs calling proc_interrupts_init+0x0/0x20 @ 1 initcall proc_interrupts_init+0x0/0x20 returned 0 after 0 usecs calling proc_loadavg_init+0x0/0x1d @ 1 initcall proc_loadavg_init+0x0/0x1d returned 0 after 0 usecs calling proc_meminfo_init+0x0/0x1d @ 1 initcall proc_meminfo_init+0x0/0x1d returned 0 after 0 usecs calling proc_stat_init+0x0/0x1a @ 1 initcall proc_stat_init+0x0/0x1a returned 0 after 0 usecs calling proc_uptime_init+0x0/0x1d @ 1 initcall proc_uptime_init+0x0/0x1d returned 0 after 0 usecs calling proc_version_init+0x0/0x1d @ 1 initcall proc_version_init+0x0/0x1d returned 0 after 0 usecs calling proc_softirqs_init+0x0/0x1d @ 1 initcall proc_softirqs_init+0x0/0x1d returned 0 after 0 usecs calling proc_kcore_init+0x0/0xba @ 1 initcall proc_kcore_init+0x0/0xba returned 0 after 2 usecs calling vmcore_init+0x0/0x545 @ 1 initcall vmcore_init+0x0/0x545 returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x1d @ 1 initcall proc_kmsg_init+0x0/0x1d returned 0 after 0 usecs calling proc_page_init+0x0/0x37 @ 1 initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs calling init_ramfs_fs+0x0/0xc @ 1 initcall init_ramfs_fs+0x0/0xc returned 0 after 0 usecs calling init_hugetlbfs_fs+0x0/0xf3 @ 1 initcall init_hugetlbfs_fs+0x0/0xf3 returned 0 after 5 usecs calling blk_scsi_ioctl_init+0x0/0x394 @ 1 initcall blk_scsi_ioctl_init+0x0/0x394 returned 0 after 0 usecs calling acpi_event_init+0x0/0x28 @ 1 initcall acpi_event_init+0x0/0x28 returned 0 after 1 usecs calling pnp_system_init+0x0/0xc @ 1 initcall pnp_system_init+0x0/0xc returned 0 after 4 usecs calling pnpacpi_init+0x0/0x65 @ 1 pnp: PnP ACPI init system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved system 00:00: [mem 0xe0000000-0xefffffff] has been reserved system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved system 00:00: [mem 0xff000000-0xffffffff] has been reserved system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved probe of 00:00 returned 1 after 53239 usecs system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved probe of 00:01 returned 1 after 6614 usecs system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) system 00:02: [io 0x1800-0x18fe] has been reserved probe of 00:02 returned 1 after 5929 usecs system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp: PnP ACPI: found 4 devices initcall pnpacpi_init+0x0/0x65 returned 0 after 113537 usecs calling chr_dev_init+0x0/0x141 @ 1 initcall chr_dev_init+0x0/0x141 returned 0 after 652 usecs calling firmware_class_init+0x0/0xec @ 1 initcall firmware_class_init+0x0/0xec returned 0 after 0 usecs calling init_pcmcia_bus+0x0/0x5d @ 1 initcall init_pcmcia_bus+0x0/0x5d returned 0 after 3 usecs calling thermal_init+0x0/0x128 @ 1 thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' initcall thermal_init+0x0/0x128 returned 0 after 5874 usecs calling cpufreq_gov_performance_init+0x0/0xc @ 1 initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 0 usecs calling cpufreq_gov_userspace_init+0x0/0xc @ 1 initcall cpufreq_gov_userspace_init+0x0/0xc returned 0 after 0 usecs calling init_acpi_pm_clocksource+0x0/0xd3 @ 1 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns initcall init_acpi_pm_clocksource+0x0/0xd3 returned 0 after 13073 usecs calling pcibios_assign_resources+0x0/0xbe @ 1 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] pci_bus 0000:00: resource 19 [mem 0x80000000-0xdfffffff window] pci_bus 0000:00: resource 20 [mem 0x27f000000-0x7fffffffff window] pci_bus 0000:00: resource 21 [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:00: resource 22 [mem 0xfed40000-0xfed44fff window] initcall pcibios_assign_resources+0x0/0xbe returned 0 after 127499 usecs calling sysctl_core_init+0x0/0x26 @ 1 initcall sysctl_core_init+0x0/0x26 returned 0 after 7 usecs calling eth_offload_init+0x0/0xf @ 1 initcall eth_offload_init+0x0/0xf returned 0 after 0 usecs calling ipv4_offload_init+0x0/0x6f @ 1 initcall ipv4_offload_init+0x0/0x6f returned 0 after 0 usecs calling inet_init+0x0/0x279 @ 1 NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) TCP: Hash tables configured (established 65536 bind 65536) UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) initcall inet_init+0x0/0x279 returned 0 after 47928 usecs calling af_unix_init+0x0/0x4d @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x4d returned 0 after 4257 usecs calling ipv6_offload_init+0x0/0x7a @ 1 initcall ipv6_offload_init+0x0/0x7a returned 0 after 0 usecs calling init_sunrpc+0x0/0x68 @ 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x68 returned 0 after 21317 usecs calling cfg80211_init+0x0/0xca @ 1 initcall cfg80211_init+0x0/0xca returned 0 after 55 usecs calling pci_apply_final_quirks+0x0/0x11c @ 1 pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0 @ 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: pci_fixup_video+0x0/0xd0 took 8155 usecs pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x686 @ 1 pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x686 took 115 usecs PCI: CLS 64 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x11c returned 0 after 38647 usecs calling acpi_reserve_resources+0x0/0xe6 @ 1 initcall acpi_reserve_resources+0x0/0xe6 returned 0 after 0 usecs calling populate_rootfs+0x0/0x104 @ 1 Unpacking initramfs... Freeing initrd memory: 8252K initcall populate_rootfs+0x0/0x104 returned 0 after 92026 usecs calling pci_iommu_init+0x0/0x3a @ 1 DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x76a74000-0x7aa74000] (64MB) initcall pci_iommu_init+0x0/0x3a returned 0 after 48913 usecs calling calgary_fixup_tce_spaces+0x0/0xe9 @ 1 initcall calgary_fixup_tce_spaces+0x0/0xe9 returned -19 after 0 usecs calling ia32_binfmt_init+0x0/0xf @ 1 initcall ia32_binfmt_init+0x0/0xf returned 0 after 2 usecs calling rapl_pmu_init+0x0/0x24d @ 1 RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules initcall rapl_pmu_init+0x0/0x24d returned 0 after 29688 usecs calling amd_uncore_init+0x0/0x2c9 @ 1 initcall amd_uncore_init+0x0/0x2c9 returned -19 after 0 usecs calling amd_ibs_init+0x0/0x1a2 @ 1 initcall amd_ibs_init+0x0/0x1a2 returned -19 after 0 usecs calling amd_iommu_pc_init+0x0/0x21e @ 1 initcall amd_iommu_pc_init+0x0/0x21e returned -19 after 0 usecs calling msr_init+0x0/0x51 @ 1 initcall msr_init+0x0/0x51 returned 0 after 1 usecs calling intel_uncore_init+0x0/0x21b @ 1 probe of 0000:00:00.0 returned 1 after 13 usecs initcall intel_uncore_init+0x0/0x21b returned 0 after 5499 usecs calling cstate_pmu_init+0x0/0x1a9 @ 1 initcall cstate_pmu_init+0x0/0x1a9 returned 0 after 16 usecs calling register_kernel_offset_dumper+0x0/0x16 @ 1 initcall register_kernel_offset_dumper+0x0/0x16 returned 0 after 0 usecs calling i8259A_init_ops+0x0/0x1c @ 1 initcall i8259A_init_ops+0x0/0x1c returned 0 after 0 usecs calling init_tsc_clocksource+0x0/0xb6 @ 1 initcall init_tsc_clocksource+0x0/0xb6 returned 0 after 0 usecs calling add_rtc_cmos+0x0/0xac @ 1 initcall add_rtc_cmos+0x0/0xac returned 0 after 1 usecs calling i8237A_init_ops+0x0/0x32 @ 1 initcall i8237A_init_ops+0x0/0x32 returned -19 after 5 usecs calling umwait_init+0x0/0x8c @ 1 initcall umwait_init+0x0/0x8c returned -19 after 0 usecs calling thermal_throttle_init_device+0x0/0x42 @ 1 initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 24 usecs calling msr_init+0x0/0xd9 @ 1 initcall msr_init+0x0/0xd9 returned 0 after 92 usecs calling cpuid_init+0x0/0xd9 @ 1 initcall cpuid_init+0x0/0xd9 returned 0 after 56 usecs calling ioapic_init_ops+0x0/0xf @ 1 initcall ioapic_init_ops+0x0/0xf returned 0 after 0 usecs calling add_pcspkr+0x0/0x6a @ 1 initcall add_pcspkr+0x0/0x6a returned 0 after 8 usecs calling start_periodic_check_for_corruption+0x0/0x30 @ 1 check: Scanning for low memory corruption every 60 seconds initcall start_periodic_check_for_corruption+0x0/0x30 returned 0 after 6372 usecs calling sysfb_init+0x0/0x9a @ 1 initcall sysfb_init+0x0/0x9a returned 0 after 16 usecs calling audit_classes_init+0x0/0xaa @ 1 initcall audit_classes_init+0x0/0xaa returned 0 after 1 usecs calling iosf_mbi_init+0x0/0x29 @ 1 initcall iosf_mbi_init+0x0/0x29 returned 0 after 4 usecs calling proc_execdomains_init+0x0/0x1d @ 1 initcall proc_execdomains_init+0x0/0x1d returned 0 after 2 usecs calling register_warn_debugfs+0x0/0x1f @ 1 initcall register_warn_debugfs+0x0/0x1f returned 0 after 2 usecs calling cpuhp_sysfs_init+0x0/0x7b @ 1 initcall cpuhp_sysfs_init+0x0/0x7b returned 0 after 6 usecs calling ioresources_init+0x0/0x45 @ 1 initcall ioresources_init+0x0/0x45 returned 0 after 1 usecs calling snapshot_device_init+0x0/0xc @ 1 initcall snapshot_device_init+0x0/0xc returned 0 after 10 usecs calling irq_pm_init_ops+0x0/0xf @ 1 initcall irq_pm_init_ops+0x0/0xf returned 0 after 0 usecs calling timekeeping_init_ops+0x0/0xf @ 1 initcall timekeeping_init_ops+0x0/0xf returned 0 after 0 usecs calling init_clocksource_sysfs+0x0/0x1f @ 1 initcall init_clocksource_sysfs+0x0/0x1f returned 0 after 15 usecs calling init_timer_list_procfs+0x0/0x2d @ 1 initcall init_timer_list_procfs+0x0/0x2d returned 0 after 0 usecs calling alarmtimer_init+0x0/0xc4 @ 1 initcall alarmtimer_init+0x0/0xc4 returned 0 after 4 usecs calling init_posix_timers+0x0/0x25 @ 1 initcall init_posix_timers+0x0/0x25 returned 0 after 0 usecs calling clockevents_init_sysfs+0x0/0xbb @ 1 initcall clockevents_init_sysfs+0x0/0xbb returned 0 after 21 usecs calling proc_dma_init+0x0/0x1d @ 1 initcall proc_dma_init+0x0/0x1d returned 0 after 0 usecs calling modules_wq_init+0x0/0x3f @ 1 initcall modules_wq_init+0x0/0x3f returned 0 after 0 usecs calling proc_modules_init+0x0/0x1a @ 1 initcall proc_modules_init+0x0/0x1a returned 0 after 0 usecs calling kallsyms_init+0x0/0x1d @ 1 initcall kallsyms_init+0x0/0x1d returned 0 after 0 usecs calling pid_namespaces_init+0x0/0x28 @ 1 initcall pid_namespaces_init+0x0/0x28 returned 0 after 3 usecs calling audit_watch_init+0x0/0x35 @ 1 initcall audit_watch_init+0x0/0x35 returned 0 after 0 usecs calling audit_fsnotify_init+0x0/0x35 @ 1 initcall audit_fsnotify_init+0x0/0x35 returned 0 after 0 usecs calling audit_tree_init+0x0/0x69 @ 1 initcall audit_tree_init+0x0/0x69 returned 0 after 0 usecs calling seccomp_sysctl_init+0x0/0x27 @ 1 initcall seccomp_sysctl_init+0x0/0x27 returned 0 after 2 usecs calling utsname_sysctl_init+0x0/0xf @ 1 initcall utsname_sysctl_init+0x0/0xf returned 0 after 2 usecs calling init_tracepoints+0x0/0x27 @ 1 initcall init_tracepoints+0x0/0x27 returned 0 after 0 usecs calling init_blk_tracer+0x0/0x50 @ 1 initcall init_blk_tracer+0x0/0x50 returned 0 after 3 usecs calling perf_event_sysfs_init+0x0/0x81 @ 1 initcall perf_event_sysfs_init+0x0/0x81 returned 0 after 97 usecs calling system_trusted_keyring_init+0x0/0x5c @ 1 Initialise system trusted keyrings initcall system_trusted_keyring_init+0x0/0x5c returned 0 after 4353 usecs calling kswapd_init+0x0/0x80 @ 1 initcall kswapd_init+0x0/0x80 returned 0 after 18 usecs calling extfrag_debug_init+0x0/0x52 @ 1 initcall extfrag_debug_init+0x0/0x52 returned 0 after 2 usecs calling mm_compute_batch_init+0x0/0x4d @ 1 initcall mm_compute_batch_init+0x0/0x4d returned 0 after 0 usecs calling slab_proc_init+0x0/0x1d @ 1 initcall slab_proc_init+0x0/0x1d returned 0 after 0 usecs calling workingset_init+0x0/0x8d @ 1 workingset: timestamp_bits=56 max_order=21 bucket_order=0 initcall workingset_init+0x0/0x8d returned 0 after 6287 usecs calling proc_vmalloc_init+0x0/0x2b @ 1 initcall proc_vmalloc_init+0x0/0x2b returned 0 after 0 usecs calling procswaps_init+0x0/0x1a @ 1 initcall procswaps_init+0x0/0x1a returned 0 after 0 usecs calling slab_sysfs_init+0x0/0xee @ 1 initcall slab_sysfs_init+0x0/0xee returned 0 after 654 usecs calling fcntl_init+0x0/0x25 @ 1 initcall fcntl_init+0x0/0x25 returned 0 after 1 usecs calling proc_filesystems_init+0x0/0x1d @ 1 initcall proc_filesystems_init+0x0/0x1d returned 0 after 0 usecs calling start_dirtytime_writeback+0x0/0x25 @ 1 initcall start_dirtytime_writeback+0x0/0x25 returned 0 after 0 usecs calling blkdev_init+0x0/0x1b @ 1 initcall blkdev_init+0x0/0x1b returned 0 after 2 usecs calling dio_init+0x0/0x28 @ 1 initcall dio_init+0x0/0x28 returned 0 after 9 usecs calling dnotify_init+0x0/0x74 @ 1 initcall dnotify_init+0x0/0x74 returned 0 after 1 usecs calling aio_setup+0x0/0x74 @ 1 initcall aio_setup+0x0/0x74 returned 0 after 8 usecs calling io_uring_init+0x0/0x28 @ 1 initcall io_uring_init+0x0/0x28 returned 0 after 1 usecs calling init_sys32_ioctl+0x0/0x23 @ 1 initcall init_sys32_ioctl+0x0/0x23 returned 0 after 53 usecs calling mbcache_init+0x0/0x2c @ 1 initcall mbcache_init+0x0/0x2c returned 0 after 9 usecs calling init_grace+0x0/0xc @ 1 initcall init_grace+0x0/0xc returned 0 after 0 usecs calling init_v2_quota_format+0x0/0x1d @ 1 initcall init_v2_quota_format+0x0/0x1d returned 0 after 0 usecs calling init_devpts_fs+0x0/0x27 @ 1 initcall init_devpts_fs+0x0/0x27 returned 0 after 3 usecs calling ext4_init_fs+0x0/0x1c6 @ 1 initcall ext4_init_fs+0x0/0x1c6 returned 0 after 50 usecs calling journal_init+0x0/0x129 @ 1 initcall journal_init+0x0/0x129 returned 0 after 26 usecs calling init_fat_fs+0x0/0x4a @ 1 initcall init_fat_fs+0x0/0x4a returned 0 after 14 usecs calling init_vfat_fs+0x0/0xc @ 1 initcall init_vfat_fs+0x0/0xc returned 0 after 0 usecs calling init_msdos_fs+0x0/0xc @ 1 initcall init_msdos_fs+0x0/0xc returned 0 after 0 usecs calling init_iso9660_fs+0x0/0x6e @ 1 initcall init_iso9660_fs+0x0/0x6e returned 0 after 9 usecs calling init_nfs_fs+0x0/0x143 @ 1 initcall init_nfs_fs+0x0/0x143 returned 0 after 54 usecs calling init_nfs_v2+0x0/0xf @ 1 initcall init_nfs_v2+0x0/0xf returned 0 after 0 usecs calling init_nfs_v3+0x0/0xf @ 1 initcall init_nfs_v3+0x0/0xf returned 0 after 0 usecs calling init_nfs_v4+0x0/0x33 @ 1 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered initcall init_nfs_v4+0x0/0x33 returned 0 after 12945 usecs calling init_nlm+0x0/0x5d @ 1 initcall init_nlm+0x0/0x5d returned 0 after 2 usecs calling init_nls_cp437+0x0/0xe @ 1 initcall init_nls_cp437+0x0/0xe returned 0 after 0 usecs calling init_nls_ascii+0x0/0xe @ 1 initcall init_nls_ascii+0x0/0xe returned 0 after 0 usecs calling init_nls_iso8859_1+0x0/0xe @ 1 initcall init_nls_iso8859_1+0x0/0xe returned 0 after 0 usecs calling init_nls_utf8+0x0/0x21 @ 1 initcall init_nls_utf8+0x0/0x21 returned 0 after 0 usecs calling init_autofs_fs+0x0/0x25 @ 1 initcall init_autofs_fs+0x0/0x25 returned 0 after 12 usecs calling ipc_init+0x0/0x20 @ 1 initcall ipc_init+0x0/0x20 returned 0 after 4 usecs calling ipc_sysctl_init+0x0/0xf @ 1 initcall ipc_sysctl_init+0x0/0xf returned 0 after 3 usecs calling init_mqueue_fs+0x0/0x9e @ 1 initcall init_mqueue_fs+0x0/0x9e returned 0 after 15 usecs calling key_proc_init+0x0/0x5f @ 1 initcall key_proc_init+0x0/0x5f returned 0 after 0 usecs calling selinux_nf_ip_init+0x0/0x2a @ 1 initcall selinux_nf_ip_init+0x0/0x2a returned 0 after 46 usecs calling init_sel_fs+0x0/0x11f @ 1 initcall init_sel_fs+0x0/0x11f returned 0 after 24 usecs calling selnl_init+0x0/0x78 @ 1 initcall selnl_init+0x0/0x78 returned 0 after 5 usecs calling sel_netif_init+0x0/0x32 @ 1 initcall sel_netif_init+0x0/0x32 returned 0 after 1 usecs calling sel_netnode_init+0x0/0x2d @ 1 initcall sel_netnode_init+0x0/0x2d returned 0 after 0 usecs calling sel_netport_init+0x0/0x2d @ 1 initcall sel_netport_init+0x0/0x2d returned 0 after 0 usecs calling aurule_init+0x0/0x26 @ 1 initcall aurule_init+0x0/0x26 returned 0 after 0 usecs calling crypto_algapi_init+0x0/0x8 @ 1 initcall crypto_algapi_init+0x0/0x8 returned 0 after 0 usecs calling jent_mod_init+0x0/0x29 @ 1 initcall jent_mod_init+0x0/0x29 returned 0 after 2090 usecs calling asymmetric_key_init+0x0/0xc @ 1 Key type asymmetric registered initcall asymmetric_key_init+0x0/0xc returned 0 after 4002 usecs calling x509_key_init+0x0/0xc @ 1 Asymmetric key parser 'x509' registered initcall x509_key_init+0x0/0xc returned 0 after 4762 usecs tsc: Refined TSC clocksource calibration: 3695.978 MHz calling proc_genhd_init+0x0/0x3d @ 1 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8cfbb6bb0, max_idle_ns: 881590789570 ns initcall proc_genhd_init+0x0/0x3d returned 0 after 0 usecs calling bsg_init+0x0/0x10e @ 1 clocksource: Switched to clocksource tsc Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) initcall bsg_init+0x0/0x10e returned 0 after 12097 usecs calling deadline_init+0x0/0xc @ 1 io scheduler mq-deadline registered initcall deadline_init+0x0/0xc returned 0 after 4429 usecs calling kyber_init+0x0/0xc @ 1 io scheduler kyber registered initcall kyber_init+0x0/0xc returned 0 after 3920 usecs calling percpu_counter_startup+0x0/0x51 @ 1 initcall percpu_counter_startup+0x0/0x51 returned 0 after 11 usecs calling sg_pool_init+0x0/0xb0 @ 1 initcall sg_pool_init+0x0/0xb0 returned 0 after 6 usecs calling pci_proc_init+0x0/0x67 @ 1 initcall pci_proc_init+0x0/0x67 returned 0 after 5 usecs calling pcie_portdrv_init+0x0/0x3a @ 1 initcall pcie_portdrv_init+0x0/0x3a returned 0 after 8 usecs calling pci_hotplug_init+0x0/0x3 @ 1 initcall pci_hotplug_init+0x0/0x3 returned 0 after 0 usecs calling genericbl_driver_init+0x0/0xe @ 1 initcall genericbl_driver_init+0x0/0xe returned 0 after 7 usecs calling efifb_driver_init+0x0/0xe @ 1 initcall efifb_driver_init+0x0/0xe returned 0 after 4 usecs calling ged_driver_init+0x0/0xe @ 1 initcall ged_driver_init+0x0/0xe returned 0 after 3 usecs calling acpi_ac_init+0x0/0x9e @ 1 initcall acpi_ac_init+0x0/0x9e returned 0 after 27 usecs calling acpi_button_driver_init+0x0/0x18 @ 1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] probe of LNXPWRBN:00 returned 1 after 11125 usecs initcall acpi_button_driver_init+0x0/0x18 returned 0 after 16490 usecs calling acpi_fan_driver_init+0x0/0xe @ 1 initcall acpi_fan_driver_init+0x0/0xe returned 0 after 2 usecs calling acpi_video_init+0x0/0xc9 @ 1 initcall acpi_video_init+0x0/0xc9 returned 0 after 11 usecs calling acpi_processor_driver_init+0x0/0xb2 @ 1 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state probe of cpu0 returned 1 after 16311 usecs probe of cpu1 returned 1 after 66 usecs probe of cpu2 returned 1 after 57 usecs probe of cpu3 returned 1 after 65 usecs initcall acpi_processor_driver_init+0x0/0xb2 returned 0 after 35483 usecs calling acpi_thermal_init+0x0/0x7d @ 1 initcall acpi_thermal_init+0x0/0x7d returned 0 after 25 usecs calling acpi_battery_init+0x0/0x34 @ 1 initcall acpi_battery_init+0x0/0x34 returned 0 after 1 usecs calling bgrt_init+0x0/0xb9 @ 1 initcall bgrt_init+0x0/0xb9 returned -19 after 0 usecs calling gpio_clk_driver_init+0x0/0xe @ 1 initcall gpio_clk_driver_init+0x0/0xe returned 0 after 2 usecs calling plt_clk_driver_init+0x0/0xe @ 1 initcall plt_clk_driver_init+0x0/0xe returned 0 after 2 usecs calling n_null_init+0x0/0x1a @ 1 initcall n_null_init+0x0/0x1a returned 0 after 0 usecs calling pty_init+0x0/0x1e9 @ 1 initcall pty_init+0x0/0x1e9 returned 0 after 47 usecs calling sysrq_init+0x0/0x67 @ 1 initcall sysrq_init+0x0/0x67 returned 0 after 0 usecs calling serial8250_init+0x0/0x158 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A probe of serial8250 returned 1 after 3 usecs initcall serial8250_init+0x0/0x158 returned 0 after 288110 usecs calling serial_pci_driver_init+0x0/0x15 @ 1 initcall serial_pci_driver_init+0x0/0x15 returned 0 after 12 usecs calling exar_pci_driver_init+0x0/0x15 @ 1 initcall exar_pci_driver_init+0x0/0x15 returned 0 after 3 usecs calling lpss8250_pci_driver_init+0x0/0x15 @ 1 initcall lpss8250_pci_driver_init+0x0/0x15 returned 0 after 3 usecs calling mid8250_pci_driver_init+0x0/0x15 @ 1 initcall mid8250_pci_driver_init+0x0/0x15 returned 0 after 2 usecs calling hpet_init+0x0/0x66 @ 1 probe of PNP0103:00 returned 0 after 15 usecs initcall hpet_init+0x0/0x66 returned 0 after 5392 usecs calling nvram_module_init+0x0/0x84 @ 1 Non-volatile memory driver v1.3 initcall nvram_module_init+0x0/0x84 returned 0 after 4176 usecs calling hwrng_modinit+0x0/0x7d @ 1 initcall hwrng_modinit+0x0/0x7d returned 0 after 44 usecs calling mod_init+0x0/0x49 @ 1 initcall mod_init+0x0/0x49 returned -19 after 0 usecs calling agp_init+0x0/0x1f @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x1f returned 0 after 4005 usecs calling agp_amd64_mod_init+0x0/0x5 @ 1 initcall agp_amd64_mod_init+0x0/0x5 returned -19 after 13 usecs calling agp_intel_init+0x0/0x24 @ 1 initcall agp_intel_init+0x0/0x24 returned 0 after 4 usecs calling drm_kms_helper_init+0x0/0x10 @ 1 initcall drm_kms_helper_init+0x0/0x10 returned 0 after 0 usecs calling drm_core_init+0x0/0xac @ 1 initcall drm_core_init+0x0/0xac returned 0 after 6 usecs calling i915_init+0x0/0x5d @ 1 i915 0000:00:02.0: vgaarb: deactivate vga console [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] caller pci_map_rom+0x77/0x1b3 mapping multiple BARs i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe938aa55 [drm] Failed to find VBIOS tables (VBT) i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2 i915 0000:00:02.0: Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management. i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 probe of 0000:00:02.0 returned 1 after 120040 usecs initcall i915_init+0x0/0x5d returned 0 after 123090 usecs calling cn_proc_init+0x0/0x35 @ 1 initcall cn_proc_init+0x0/0x35 returned 0 after 0 usecs calling topology_sysfs_init+0x0/0x30 @ 1 initcall topology_sysfs_init+0x0/0x30 returned 0 after 13 usecs calling cacheinfo_sysfs_init+0x0/0x27 @ 1 fbcon: i915drmfb (fb0) is primary device initcall cacheinfo_sysfs_init+0x0/0x27 returned 0 after 84 usecs calling loop_init+0x0/0x15e @ 1 loop: module loaded initcall loop_init+0x0/0x15e returned 0 after 804 usecs calling mac_hid_init+0x0/0x1d @ 1 initcall mac_hid_init+0x0/0x1d returned 0 after 1 usecs calling spi_transport_init+0x0/0x70 @ 1 initcall spi_transport_init+0x0/0x70 returned 0 after 4 usecs calling init_sd+0x0/0x194 @ 1 initcall init_sd+0x0/0x194 returned 0 after 8 usecs calling init_sr+0x0/0x44 @ 1 initcall init_sr+0x0/0x44 returned 0 after 1 usecs calling init_sg+0x0/0x1c3 @ 1 initcall init_sg+0x0/0x1c3 returned 0 after 3 usecs calling ahci_pci_driver_init+0x0/0x15 @ 1 ahci 0000:00:17.0: version 3.0 ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst scsi host0: ahci scsi host1: ahci scsi host2: ahci scsi host3: ahci ata1: SATA max UDMA/133 abar m2048@0x91018000 port 0x91018100 irq 121 ata2: SATA max UDMA/133 abar m2048@0x91018000 port 0x91018180 irq 121 ata3: SATA max UDMA/133 abar m2048@0x91018000 port 0x91018200 irq 121 ata4: SATA max UDMA/133 abar m2048@0x91018000 port 0x91018280 irq 121 probe of 0000:00:17.0 returned 1 after 9629 usecs initcall ahci_pci_driver_init+0x0/0x15 returned 0 after 9420 usecs calling piix_init+0x0/0x24 @ 1 initcall piix_init+0x0/0x24 returned 0 after 6 usecs calling amd_pci_driver_init+0x0/0x15 @ 1 initcall amd_pci_driver_init+0x0/0x15 returned 0 after 3 usecs calling oldpiix_pci_driver_init+0x0/0x15 @ 1 initcall oldpiix_pci_driver_init+0x0/0x15 returned 0 after 3 usecs calling sch_pci_driver_init+0x0/0x15 @ 1 initcall sch_pci_driver_init+0x0/0x15 returned 0 after 3 usecs calling net_olddevs_init+0x0/0x56 @ 1 initcall net_olddevs_init+0x0/0x56 returned 0 after 1 usecs calling blackhole_netdev_init+0x0/0x77 @ 1 initcall blackhole_netdev_init+0x0/0x77 returned 0 after 3 usecs calling phy_module_init+0x0/0x13 @ 1 initcall phy_module_init+0x0/0x13 returned 0 after 22 usecs calling tg3_driver_init+0x0/0x15 @ 1 initcall tg3_driver_init+0x0/0x15 returned 0 after 7 usecs calling e100_init_module+0x0/0x53 @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x53 returned 0 after 4 usecs calling e1000_init_module+0x0/0x79 @ 1 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. initcall e1000_init_module+0x0/0x79 returned 0 after 4 usecs calling e1000_init_module+0x0/0x34 @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. initcall e1000_init_module+0x0/0x34 returned 0 after 6 usecs calling sky2_init_module+0x0/0x21 @ 1 sky2: driver version 1.30 initcall sky2_init_module+0x0/0x21 returned 0 after 4 usecs calling forcedeth_pci_driver_init+0x0/0x15 @ 1 initcall forcedeth_pci_driver_init+0x0/0x15 returned 0 after 4 usecs calling rtl8139_init_module+0x0/0x15 @ 1 initcall rtl8139_init_module+0x0/0x15 returned 0 after 3 usecs calling rtl8169_pci_driver_init+0x0/0x15 @ 1 initcall rtl8169_pci_driver_init+0x0/0x15 returned 0 after 3 usecs calling cdrom_init+0x0/0x8 @ 1 initcall cdrom_init+0x0/0x8 returned 0 after 2 usecs calling nonstatic_sysfs_init+0x0/0xc @ 1 initcall nonstatic_sysfs_init+0x0/0xc returned 0 after 0 usecs calling yenta_cardbus_driver_init+0x0/0x15 @ 1 initcall yenta_cardbus_driver_init+0x0/0x15 returned 0 after 4 usecs calling mon_init+0x0/0x12a @ 1 initcall mon_init+0x0/0x12a returned 0 after 22 usecs calling ehci_hcd_init+0x0/0x57 @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver initcall ehci_hcd_init+0x0/0x57 returned 0 after 0 usecs calling ehci_pci_init+0x0/0x60 @ 1 ehci-pci: EHCI PCI platform driver initcall ehci_pci_init+0x0/0x60 returned 0 after 4 usecs calling ohci_hcd_mod_init+0x0/0x4f @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x4f returned 0 after 1 usecs calling ohci_pci_init+0x0/0x60 @ 1 ohci-pci: OHCI PCI platform driver initcall ohci_pci_init+0x0/0x60 returned 0 after 4 usecs calling uhci_hcd_init+0x0/0xaa @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xaa returned 0 after 5 usecs calling xhci_hcd_init+0x0/0x1f @ 1 initcall xhci_hcd_init+0x0/0x1f returned 0 after 0 usecs calling xhci_pci_init+0x0/0x49 @ 1 xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 xhci_hcd 0000:00:14.0: cache line size of 64 is not supported usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 5.4.72 xhci-hcd usb usb1: SerialNumber: 0000:00:14.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected probe of 1-0:1.0 returned 1 after 131 usecs probe of usb1 returned 1 after 151 usecs xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 5.4.72 xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected probe of 2-0:1.0 returned 1 after 95 usecs probe of usb2 returned 1 after 112 usecs probe of 0000:00:14.0 returned 1 after 1821 usecs initcall xhci_pci_init+0x0/0x49 returned 0 after 1784 usecs calling usblp_driver_init+0x0/0x15 @ 1 usbcore: registered new interface driver usblp initcall usblp_driver_init+0x0/0x15 returned 0 after 4 usecs calling usb_storage_driver_init+0x0/0x2a @ 1 usbcore: registered new interface driver usb-storage initcall usb_storage_driver_init+0x0/0x2a returned 0 after 6 usecs calling i8042_init+0x0/0x48d @ 1 i8042: PNP: No PS/2 controller found. i8042: Probing ports directly. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) ata1.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133 ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 32) ata1.00: configured for UDMA/133 ata3: SATA link down (SStatus 4 SControl 300) i8042: No controller found initcall i8042_init+0x0/0x48d returned -19 after 1196468 usecs calling serport_init+0x0/0x2c @ 1 initcall serport_init+0x0/0x2c returned 0 after 0 usecs calling input_leds_init+0x0/0xc @ 1 initcall input_leds_init+0x0/0xc returned 0 after 27 usecs calling evdev_init+0x0/0xc @ 1 initcall evdev_init+0x0/0xc returned 0 after 27 usecs calling atkbd_init+0x0/0x21 @ 1 initcall atkbd_init+0x0/0x21 returned 0 after 7 usecs calling psmouse_init+0x0/0x81 @ 1 initcall psmouse_init+0x0/0x81 returned 0 after 10 usecs calling cmos_init+0x0/0x6b @ 1 rtc_cmos 00:03: RTC can wake from S4 probe of alarmtimer.0.auto returned 1 after 1 usecs rtc_cmos 00:03: registered as rtc0 rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs probe of 00:03 returned 1 after 456 usecs initcall cmos_init+0x0/0x6b returned 0 after 450 usecs calling smbalert_driver_init+0x0/0xe @ 1 initcall smbalert_driver_init+0x0/0xe returned 0 after 4 usecs calling i2c_i801_init+0x0/0xc6 @ 1 i801_smbus 0000:00:1f.4: SPD Write Disable is set i801_smbus 0000:00:1f.4: SMBus using PCI interrupt probe of 0000:00:1f.4 returned 1 after 278 usecs initcall i2c_i801_init+0x0/0xc6 returned 0 after 279 usecs calling dm_init+0x0/0x40 @ 1 device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x40 returned 0 after 34 usecs calling dm_mirror_init+0x0/0x2a @ 1 initcall dm_mirror_init+0x0/0x2a returned 0 after 0 usecs calling dm_dirty_log_init+0x0/0x4f @ 1 initcall dm_dirty_log_init+0x0/0x4f returned 0 after 0 usecs calling dm_zero_init+0x0/0x29 @ 1 initcall dm_zero_init+0x0/0x29 returned 0 after 0 usecs calling cpufreq_gov_dbs_init+0x0/0xc @ 1 initcall cpufreq_gov_dbs_init+0x0/0xc returned 0 after 0 usecs calling intel_pstate_init+0x0/0x3ca @ 1 intel_pstate: Intel P-state driver initializing intel_pstate: Disabling energy efficiency optimization intel_pstate: HWP enabled initcall intel_pstate_init+0x0/0x3ca returned 0 after 182 usecs calling efivars_sysfs_init+0x0/0x30 @ 1 initcall efivars_sysfs_init+0x0/0x30 returned -19 after 0 usecs calling esrt_sysfs_init+0x0/0x2a0 @ 1 initcall esrt_sysfs_init+0x0/0x2a0 returned -38 after 0 usecs calling hid_init+0x0/0x5d @ 1 hidraw: raw HID events driver (C) Jiri Kosina initcall hid_init+0x0/0x5d returned 0 after 7 usecs calling hid_generic_init+0x0/0x15 @ 1 initcall hid_generic_init+0x0/0x15 returned 0 after 3 usecs calling a4_driver_init+0x0/0x15 @ 1 initcall a4_driver_init+0x0/0x15 returned 0 after 2 usecs calling apple_driver_init+0x0/0x15 @ 1 initcall apple_driver_init+0x0/0x15 returned 0 after 4 usecs calling belkin_driver_init+0x0/0x15 @ 1 initcall belkin_driver_init+0x0/0x15 returned 0 after 2 usecs calling ch_driver_init+0x0/0x15 @ 1 initcall ch_driver_init+0x0/0x15 returned 0 after 2 usecs calling ch_driver_init+0x0/0x15 @ 1 initcall ch_driver_init+0x0/0x15 returned 0 after 2 usecs calling cp_driver_init+0x0/0x15 @ 1 initcall cp_driver_init+0x0/0x15 returned 0 after 2 usecs calling ez_driver_init+0x0/0x15 @ 1 initcall ez_driver_init+0x0/0x15 returned 0 after 2 usecs calling gyration_driver_init+0x0/0x15 @ 1 initcall gyration_driver_init+0x0/0x15 returned 0 after 2 usecs calling ite_driver_init+0x0/0x15 @ 1 initcall ite_driver_init+0x0/0x15 returned 0 after 2 usecs calling ks_driver_init+0x0/0x15 @ 1 initcall ks_driver_init+0x0/0x15 returned 0 after 2 usecs calling lg_driver_init+0x0/0x15 @ 1 initcall lg_driver_init+0x0/0x15 returned 0 after 3 usecs calling ms_driver_init+0x0/0x15 @ 1 initcall ms_driver_init+0x0/0x15 returned 0 after 2 usecs calling mr_driver_init+0x0/0x15 @ 1 initcall mr_driver_init+0x0/0x15 returned 0 after 3 usecs calling ntrig_driver_init+0x0/0x15 @ 1 initcall ntrig_driver_init+0x0/0x15 returned 0 after 3 usecs calling pl_driver_init+0x0/0x15 @ 1 initcall pl_driver_init+0x0/0x15 returned 0 after 2 usecs calling pl_driver_init+0x0/0x15 @ 1 initcall pl_driver_init+0x0/0x15 returned 0 after 2 usecs calling redragon_driver_init+0x0/0x15 @ 1 initcall redragon_driver_init+0x0/0x15 returned 0 after 2 usecs calling samsung_driver_init+0x0/0x15 @ 1 initcall samsung_driver_init+0x0/0x15 returned 0 after 4 usecs calling sony_init+0x0/0x38 @ 1 initcall sony_init+0x0/0x38 returned 0 after 3 usecs calling sp_driver_init+0x0/0x15 @ 1 initcall sp_driver_init+0x0/0x15 returned 0 after 2 usecs calling ts_driver_init+0x0/0x15 @ 1 initcall ts_driver_init+0x0/0x15 returned 0 after 2 usecs calling hid_init+0x0/0x59 @ 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0x59 returned 0 after 4 usecs calling eeepc_laptop_init+0x0/0x5a @ 1 initcall eeepc_laptop_init+0x0/0x5a returned -19 after 20 usecs calling pmc_atom_init+0x0/0x27a @ 1 initcall pmc_atom_init+0x0/0x27a returned -19 after 1 usecs calling alsa_hwdep_init+0x0/0x5a @ 1 initcall alsa_hwdep_init+0x0/0x5a returned 0 after 1 usecs calling alsa_timer_init+0x0/0x1ab @ 1 initcall alsa_timer_init+0x0/0x1ab returned 0 after 15 usecs calling snd_hrtimer_init+0x0/0x115 @ 1 initcall snd_hrtimer_init+0x0/0x115 returned 0 after 0 usecs calling alsa_pcm_init+0x0/0x62 @ 1 initcall alsa_pcm_init+0x0/0x62 returned 0 after 0 usecs calling alsa_seq_init+0x0/0x4e @ 1 initcall alsa_seq_init+0x0/0x4e returned 0 after 11 usecs calling alsa_seq_dummy_init+0x0/0x98 @ 1 initcall alsa_seq_dummy_init+0x0/0x98 returned 0 after 1 usecs calling azx_driver_init+0x0/0x15 @ 1 initcall azx_driver_init+0x0/0x15 returned 0 after 7 usecs calling pm_check_save_msr+0x0/0x30 @ 1 initcall pm_check_save_msr+0x0/0x30 returned 0 after 0 usecs calling sock_diag_init+0x0/0x2a @ 1 initcall sock_diag_init+0x0/0x2a returned 0 after 7 usecs calling blackhole_init+0x0/0xc @ 1 initcall blackhole_init+0x0/0xc returned 0 after 0 usecs calling nfnetlink_init+0x0/0x58 @ 1 initcall nfnetlink_init+0x0/0x58 returned 0 after 1 usecs calling nfnetlink_log_init+0x0/0x9b @ 1 initcall nfnetlink_log_init+0x0/0x9b returned 0 after 1 usecs calling nf_conntrack_standalone_init+0x0/0x8a @ 1 initcall nf_conntrack_standalone_init+0x0/0x8a returned 0 after 77 usecs calling ctnetlink_init+0x0/0x86 @ 1 initcall ctnetlink_init+0x0/0x86 returned 0 after 0 usecs calling nf_conntrack_ftp_init+0x0/0x130 @ 1 initcall nf_conntrack_ftp_init+0x0/0x130 returned 0 after 1 usecs calling nf_conntrack_irc_init+0x0/0x130 @ 1 initcall nf_conntrack_irc_init+0x0/0x130 returned 0 after 1 usecs calling nf_conntrack_sip_init+0x0/0x175 @ 1 initcall nf_conntrack_sip_init+0x0/0x175 returned 0 after 2 usecs calling nf_nat_init+0x0/0xcc @ 1 initcall nf_nat_init+0x0/0xcc returned 0 after 23 usecs calling nf_nat_ftp_init+0x0/0x26 @ 1 initcall nf_nat_ftp_init+0x0/0x26 returned 0 after 0 usecs calling nf_nat_irc_init+0x0/0x26 @ 1 initcall nf_nat_irc_init+0x0/0x26 returned 0 after 0 usecs calling nf_nat_sip_init+0x0/0x32 @ 1 initcall nf_nat_sip_init+0x0/0x32 returned 0 after 0 usecs calling xt_init+0x0/0xff @ 1 initcall xt_init+0x0/0xff returned 0 after 0 usecs calling tcpudp_mt_init+0x0/0x11 @ 1 initcall tcpudp_mt_init+0x0/0x11 returned 0 after 0 usecs calling connsecmark_tg_init+0x0/0xc @ 1 initcall connsecmark_tg_init+0x0/0xc returned 0 after 0 usecs calling nflog_tg_init+0x0/0xc @ 1 initcall nflog_tg_init+0x0/0xc returned 0 after 0 usecs calling secmark_tg_init+0x0/0xc @ 1 initcall secmark_tg_init+0x0/0xc returned 0 after 0 usecs calling tcpmss_tg_init+0x0/0x11 @ 1 initcall tcpmss_tg_init+0x0/0x11 returned 0 after 0 usecs calling conntrack_mt_init+0x0/0x11 @ 1 initcall conntrack_mt_init+0x0/0x11 returned 0 after 0 usecs calling policy_mt_init+0x0/0x11 @ 1 initcall policy_mt_init+0x0/0x11 returned 0 after 0 usecs calling state_mt_init+0x0/0xc @ 1 initcall state_mt_init+0x0/0xc returned 0 after 0 usecs calling gre_offload_init+0x0/0x49 @ 1 initcall gre_offload_init+0x0/0x49 returned 0 after 0 usecs calling sysctl_ipv4_init+0x0/0x47 @ 1 initcall sysctl_ipv4_init+0x0/0x47 returned 0 after 24 usecs calling tunnel4_init+0x0/0x54 @ 1 initcall tunnel4_init+0x0/0x54 returned 0 after 0 usecs calling nf_defrag_init+0x0/0xc @ 1 initcall nf_defrag_init+0x0/0xc returned 0 after 0 usecs calling ip_tables_init+0x0/0x91 @ 1 initcall ip_tables_init+0x0/0x91 returned 0 after 1 usecs calling iptable_filter_init+0x0/0x4c @ 1 initcall iptable_filter_init+0x0/0x4c returned 0 after 16 usecs calling iptable_mangle_init+0x0/0xbd @ 1 initcall iptable_mangle_init+0x0/0xbd returned 0 after 12 usecs calling reject_tg_init+0x0/0xc @ 1 initcall reject_tg_init+0x0/0xc returned 0 after 0 usecs calling cubictcp_register+0x0/0x53 @ 1 initcall cubictcp_register+0x0/0x53 returned 0 after 0 usecs calling xfrm_user_init+0x0/0x46 @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x46 returned 0 after 1 usecs calling inet6_init+0x0/0x37b @ 1 NET: Registered protocol family 10 Segment Routing with IPv6 initcall inet6_init+0x0/0x37b returned 0 after 155 usecs calling ah6_init+0x0/0x73 @ 1 initcall ah6_init+0x0/0x73 returned 0 after 0 usecs calling esp6_init+0x0/0x73 @ 1 initcall esp6_init+0x0/0x73 returned 0 after 0 usecs calling ip6_tables_init+0x0/0x91 @ 1 initcall ip6_tables_init+0x0/0x91 returned 0 after 1 usecs calling ip6table_filter_init+0x0/0x4c @ 1 initcall ip6table_filter_init+0x0/0x4c returned 0 after 11 usecs calling ip6table_mangle_init+0x0/0xbd @ 1 initcall ip6table_mangle_init+0x0/0xbd returned 0 after 11 usecs calling nf_defrag_init+0x0/0x46 @ 1 initcall nf_defrag_init+0x0/0x46 returned 0 after 3 usecs calling ipv6header_mt6_init+0x0/0xc @ 1 initcall ipv6header_mt6_init+0x0/0xc returned 0 after 0 usecs calling reject_tg6_init+0x0/0xc @ 1 initcall reject_tg6_init+0x0/0xc returned 0 after 0 usecs calling sit_init+0x0/0xc6 @ 1 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver initcall sit_init+0x0/0xc6 returned 0 after 59 usecs calling packet_init+0x0/0x78 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x78 returned 0 after 1 usecs calling init_rpcsec_gss+0x0/0x62 @ 1 initcall init_rpcsec_gss+0x0/0x62 returned 0 after 3 usecs calling init_dns_resolver+0x0/0xcf @ 1 Key type dns_resolver registered initcall init_dns_resolver+0x0/0xcf returned 0 after 7 usecs calling mcheck_init_device+0x0/0x11a @ 1 initcall mcheck_init_device+0x0/0x11a returned 0 after 89 usecs calling mcheck_late_init+0x0/0x5b @ 1 initcall mcheck_late_init+0x0/0x5b returned 0 after 2 usecs calling severities_debugfs_init+0x0/0x25 @ 1 initcall severities_debugfs_init+0x0/0x25 returned 0 after 0 usecs calling threshold_init_device+0x0/0x41 @ 1 initcall threshold_init_device+0x0/0x41 returned 0 after 0 usecs calling microcode_init+0x0/0x1e1 @ 1 microcode: sig=0x906ea, pf=0x2, revision=0xd6 microcode: Microcode Update Driver: v2.2. initcall microcode_init+0x0/0x1e1 returned 0 after 24 usecs calling hpet_insert_resource+0x0/0x1e @ 1 initcall hpet_insert_resource+0x0/0x1e returned 0 after 1 usecs calling update_mp_table+0x0/0x508 @ 1 initcall update_mp_table+0x0/0x508 returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x3e @ 1 initcall lapic_insert_resource+0x0/0x3e returned 0 after 0 usecs calling print_ipi_mode+0x0/0x28 @ 1 IPI shorthand broadcast: enabled initcall print_ipi_mode+0x0/0x28 returned 0 after 0 usecs calling print_ICs+0x0/0xc6 @ 1 initcall print_ICs+0x0/0xc6 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x2d @ 1 initcall pat_memtype_list_init+0x0/0x2d returned 0 after 1 usecs calling create_tlb_single_page_flush_ceiling+0x0/0x24 @ 1 initcall create_tlb_single_page_flush_ceiling+0x0/0x24 returned 0 after 0 usecs calling create_init_pkru_value+0x0/0x24 @ 1 initcall create_init_pkru_value+0x0/0x24 returned 0 after 0 usecs calling init_oops_id+0x0/0x30 @ 1 initcall init_oops_id+0x0/0x30 returned 0 after 1 usecs calling sched_clock_init_late+0x0/0x71 @ 1 sched_clock: Marking stable (6929785822, 906590631)->(9120346935, -1283970482) initcall sched_clock_init_late+0x0/0x71 returned 0 after 14 usecs calling pm_qos_power_init+0x0/0x81 @ 1 initcall pm_qos_power_init+0x0/0x81 returned 0 after 13 usecs calling pm_debugfs_init+0x0/0x1f @ 1 initcall pm_debugfs_init+0x0/0x1f returned 0 after 0 usecs calling printk_late_init+0x0/0x118 @ 1 initcall printk_late_init+0x0/0x118 returned 0 after 0 usecs calling init_srcu_module_notifier+0x0/0x27 @ 1 initcall init_srcu_module_notifier+0x0/0x27 returned 0 after 0 usecs calling swiotlb_create_debugfs+0x0/0x4e @ 1 initcall swiotlb_create_debugfs+0x0/0x4e returned 0 after 1 usecs calling tk_debug_sleep_time_init+0x0/0x1f @ 1 initcall tk_debug_sleep_time_init+0x0/0x1f returned 0 after 0 usecs calling debugfs_kprobe_init+0x0/0xaa @ 1 initcall debugfs_kprobe_init+0x0/0xaa returned 0 after 4 usecs calling taskstats_init+0x0/0x36 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x36 returned 0 after 2 usecs calling load_system_certificate_list+0x0/0xde @ 1 Loading compiled-in X.509 certificates initcall load_system_certificate_list+0x0/0xde returned 0 after 0 usecs calling fault_around_debugfs+0x0/0x1f @ 1 initcall fault_around_debugfs+0x0/0x1f returned 0 after 0 usecs calling max_swapfiles_check+0x0/0x3 @ 1 initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x34 @ 1 initcall check_early_ioremap_leak+0x0/0x34 returned 0 after 0 usecs calling init_root_keyring+0x0/0x9 @ 1 initcall init_root_keyring+0x0/0x9 returned 0 after 16 usecs calling integrity_fs_init+0x0/0x11 @ 1 initcall integrity_fs_init+0x0/0x11 returned -19 after 0 usecs calling prandom_reseed+0x0/0x2a @ 1 initcall prandom_reseed+0x0/0x2a returned 0 after 7 usecs calling init_error_injection+0x0/0x6a @ 1 initcall init_error_injection+0x0/0x6a returned 0 after 88 usecs calling pci_resource_alignment_sysfs_init+0x0/0x13 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x13 returned 0 after 0 usecs calling pci_sysfs_init+0x0/0x4b @ 1 initcall pci_sysfs_init+0x0/0x4b returned 0 after 25 usecs calling clk_debug_init+0x0/0x111 @ 1 initcall clk_debug_init+0x0/0x111 returned 0 after 2 usecs calling dmar_free_unused_resources+0x0/0xd9 @ 1 initcall dmar_free_unused_resources+0x0/0xd9 returned 0 after 4 usecs calling deferred_probe_initcall+0x0/0x90 @ 1 initcall deferred_probe_initcall+0x0/0x90 returned 0 after 7 usecs calling late_resume_init+0x0/0x10e @ 1 PM: Magic number: 8:879:24 misc cpu_dma_latency: hash matches initcall late_resume_init+0x0/0x10e returned 0 after 34 usecs calling init_netconsole+0x0/0x235 @ 1 usb 1-5: new low-speed USB device number 2 using xhci_hcd Console: switching to colour frame buffer device 240x67 usb 1-5: New USB device found, idVendor=13ba, idProduct=0220, bcdDevice= 0.69 i915 0000:00:02.0: fb0: i915drmfb frame buffer device usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-5: Product: Generic USB K/B usb 1-5: Manufacturer: Generic USB K/B printk: console [netcon0] enabled scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 0362 PQ: 0 ANSI: 5 input: Generic USB K/B Generic USB K/B as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:13BA:0220.0001/input/input1 netconsole: network logging started initcall init_netconsole+0x0/0x235 returned 0 after 3031518 usecs probe of 0:0:0:0 returned 0 after 1 usecs calling acpi_cpufreq_init+0x0/0x1f7 @ 1 initcall acpi_cpufreq_init+0x0/0x1f7 returned -17 after 0 usecs sd 0:0:0:0: Attached scsi generic sg0 type 0 ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA calling firmware_memmap_init+0x0/0x2e @ 1 hid-generic 0003:13BA:0220.0001: input,hidraw0: USB HID v1.10 Keyboard [Generic USB K/B Generic USB K/B] on usb-0000:00:14.0-5/input0 initcall firmware_memmap_init+0x0/0x2e returned 0 after 178 usecs probe of 0003:13BA:0220.0001 returned 1 after 62370 usecs ata1.00: Enabling discard_zeroes_data calling register_update_efi_random_seed+0x0/0x20 @ 1 probe of 1-5:1.0 returned 1 after 76300 usecs initcall register_update_efi_random_seed+0x0/0x20 returned 0 after 0 usecs calling efi_shutdown_init+0x0/0x3a @ 1 input: Generic USB K/B Generic USB K/B Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:13BA:0220.0002/input/input2 initcall efi_shutdown_init+0x0/0x3a returned -19 after 0 usecs calling efi_earlycon_unmap_fb+0x0/0x21 @ 1 input: Generic USB K/B Generic USB K/B System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:13BA:0220.0002/input/input3 initcall efi_earlycon_unmap_fb+0x0/0x21 returned 0 after 0 usecs calling pci_mmcfg_late_insert_resources+0x0/0x47 @ 1 hid-generic 0003:13BA:0220.0002: input,hidraw1: USB HID v1.10 Device [Generic USB K/B Generic USB K/B] on usb-0000:00:14.0-5/input1 initcall pci_mmcfg_late_insert_resources+0x0/0x47 returned 0 after 1 usecs probe of 0003:13BA:0220.0002 returned 1 after 107058 usecs calling tcp_congestion_default+0x0/0x13 @ 1 initcall tcp_congestion_default+0x0/0x13 returned 0 after 0 usecs probe of 1-5:1.1 returned 1 after 129604 usecs calling ip_auto_config+0x0/0xee6 @ 1 initcall ip_auto_config+0x0/0xee6 returned 0 after 13 usecs sda: sda1 ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] Attached SCSI disk probe of 0:0:0:0 returned 1 after 197768 usecs probe of 1-5 returned 1 after 236748 usecs calling regulatory_init_db+0x0/0x1c3 @ 1 cfg80211: Loading compiled-in X.509 certificates for regulatory database modprobe (95) used greatest stack depth: 14376 bytes left cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' initcall regulatory_init_db+0x0/0x1c3 returned 0 after 1999 usecs calling software_resume+0x0/0x220 @ 1 initcall software_resume+0x0/0x220 returned -2 after 0 usecs calling clear_boot_tracer+0x0/0x26 @ 1 initcall clear_boot_tracer+0x0/0x26 returned 0 after 0 usecs calling tracing_set_default_clock+0x0/0x62 @ 1 initcall tracing_set_default_clock+0x0/0x62 returned 0 after 0 usecs calling fb_logo_late_init+0x0/0xa @ 1 initcall fb_logo_late_init+0x0/0xa returned 0 after 0 usecs calling clk_disable_unused+0x0/0x130 @ 1 initcall clk_disable_unused+0x0/0x130 returned 0 after 0 usecs calling alsa_sound_last_init+0x0/0x64 @ 1 ALSA device list: No soundcards found. initcall alsa_sound_last_init+0x0/0x64 returned 0 after 0 usecs platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 cfg80211: failed to load regulatory.db usb 1-6: new low-speed USB device number 3 using xhci_hcd Freeing unused kernel image memory: 1316K Write protecting the kernel read-only data: 20480k Freeing unused kernel image memory: 2004K Freeing unused kernel image memory: 880K Run /init as init process usb 1-6: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.50 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6: Product: USB Keyboard usb 1-6: Manufacturer: SIGMACHIP input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1C4F:0002.0003/input/input4 hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input0 probe of 0003:1C4F:0002.0003 returned 1 after 79516 usecs probe of 1-6:1.0 returned 1 after 90767 usecs input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1C4F:0002.0004/input/input5 input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1C4F:0002.0004/input/input6 hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input1 probe of 0003:1C4F:0002.0004 returned 1 after 96341 usecs probe of 1-6:1.1 returned 1 after 106700 usecs probe of 1-6 returned 1 after 213363 usecs fsck.ext4 (126) used greatest stack depth: 14280 bytes left random: fast init done EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) mount (127) used greatest stack depth: 13832 bytes left systemd[1]: systemd 245.5-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture x86-64. systemd[1]: Set hostname to . 10-arch (137) used greatest stack depth: 13672 bytes left systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. systemd[1]: (This warning is only shown for the first unit using IP firewalling.) systemd[1]: Created slice system-getty.slice. random: crng init done systemd[1]: Created slice system-modprobe.slice.