Nick: anonymous
E-mail: none
Board: ASUS PRIME H310M-C R2.0
Contents: 


coreboot-4.12-2114-g7628c42914-dirty Sun Sep 27 13:27:06 UTC 2020 bootblock starting (log level: 5)...


coreboot-4.12-2114-g7628c42914-dirty Sun Sep 27 13:27:06 UTC 2020 romstage starting (log level: 5)...
MRC: no data in 'RW_MRC_CACHE'


coreboot-4.12-2114-g7628c42914-dirty Sun Sep 27 13:27:06 UTC 2020 postcar starting (log level: 5)...


coreboot-4.12-2114-g7628c42914-dirty Sun Sep 27 13:27:06 UTC 2020 ramstage starting (log level: 5)...
Unable to locate Global NVS
Unable to locate Global NVS
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
gpio_pad_reset_config_override: Logical to Chipset mapping not found
ERROR: Unknown MCH (0x3e0f) in get_sku_icc_max
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_icc_max
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_icc_max
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_icc_max
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
ERROR: Unknown MCH (0x3e0f) in get_sku_ac_dc_loadline
pcie_rp_update_dev: Couldn't find PCIe Root Port #17 (originally PCI: 00:1b.0) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #18 (originally PCI: 00:1b.1) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #19 (originally PCI: 00:1b.2) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #20 (originally PCI: 00:1b.3) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #21 (originally PCI: 00:1b.4) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #22 (originally PCI: 00:1b.5) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #23 (originally PCI: 00:1b.6) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #24 (originally PCI: 00:1b.7) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #1 (originally PCI: 00:1c.0) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #2 (originally PCI: 00:1c.1) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #3 (originally PCI: 00:1c.2) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #4 (originally PCI: 00:1c.3) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #5 (originally PCI: 00:1c.4) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #6 (originally PCI: 00:1c.5) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #7 (originally PCI: 00:1c.6) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #8 (originally PCI: 00:1c.7) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #9 (originally PCI: 00:1d.0) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #10 (originally PCI: 00:1d.1) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #11 (originally PCI: 00:1d.2) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #12 (originally PCI: 00:1d.3) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #13 (originally PCI: 00:1d.4) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #14 (originally PCI: 00:1d.5) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #15 (originally PCI: 00:1d.6) which was enabled in devicetree, removing.
pcie_rp_update_dev: Couldn't find PCIe Root Port #16 (originally PCI: 00:1d.7) which was enabled in devicetree, removing.
PCI: Leftover static devices:
PCI: 00:12.0
PCI: 00:15.0
PCI: 00:15.1
PCI: 00:15.2
PCI: 00:15.3
PCI: 00:1f.6
PCI: Check your devicetree.cb.
MRC: no data in 'RW_MRC_CACHE'
SPI Transaction Error at Flash Offset e00000 HSFSTS = 0x01046003
REGF metadata allocation failed: 392 data blocks 4096 total blocks
MRC: Could not find region 'UNIFIED_MRC_CACHE'
PNP: 002e.2 missing read_resources
PCI: 00:02.0: Missing PCI Option ROM
SeaBIOS (version rel-1.14.0-2-g41289b8)
BUILD: gcc: (coreboot toolchain vf2741aa632 2020-07-06) 8.3.0 binutils: (GNU Binutils) 2.33.1
Attempting to find coreboot table
Found coreboot table forwarder.
Now attempting to find coreboot memory map
SeaBIOS (version rel-1.14.0-2-g41289b8)
BUILD: gcc: (coreboot toolchain vf2741aa632 2020-07-06) 8.3.0 binutils: (GNU Binutils) 2.33.1
Found coreboot cbmem console @ 7abde000
Found mainboard ASUS PRIME H310M-C R2.0
malloc preinit
Relocating init from 0x000de920 to 0x7aa653e0 (size 56192)
malloc init
Found CBFS header at 0xffe10238
Add romfile: cbfs master header (size=32)
Add romfile: fallback/romstage (size=40028)
Add romfile: cpu_microcode_blob.bin (size=102400)
Add romfile: fallback/ramstage (size=93473)
Add romfile: config (size=215)
Add romfile: revision (size=681)
Add romfile: fallback/dsdt.aml (size=10555)
Add romfile: payload_revision (size=237)
Add romfile:  (size=792)
Add romfile: fspm.bin (size=405504)
Add romfile: payload_config (size=1621)
Add romfile:  (size=2264)
Add romfile: fsps.bin (size=188416)
Add romfile: fallback/postcar (size=15740)
Add romfile: fallback/payload (size=74410)
Add romfile:  (size=1044184)
Add romfile: bootblock (size=49152)
multiboot: eax=7ab3ed80, ebx=7ab3ed44
init ivt
init bda
init bios32
init PMM
init PNPBIOS table
init keyboard
init mouse
init pic
math cp init
PCI probe
PCI device 00:00.0 (vd=8086:3e0f c=0600)
PCI device 00:01.0 (vd=8086:1901 c=0604)
PCI device 00:02.0 (vd=8086:3e90 c=0300)
PCI device 00:08.0 (vd=8086:1911 c=0880)
PCI device 00:14.0 (vd=8086:a2af c=0c03)
PCI device 00:14.2 (vd=8086:a2b1 c=1180)
PCI device 00:16.0 (vd=8086:a2ba c=0780)
PCI device 00:17.0 (vd=8086:a282 c=0106)
PCI device 00:1f.0 (vd=8086:a2ca c=0601)
PCI device 00:1f.2 (vd=8086:a2a1 c=0580)
PCI device 00:1f.3 (vd=8086:a2f0 c=0403)
PCI device 00:1f.4 (vd=8086:a2a3 c=0c05)
PCI device 00:1f.5 (vd=8086:a2a4 c=0000)
Found 13 PCI devices (max PCI bus is 01)
Relocating coreboot bios tables
Copying SMBIOS entry point from 0x7aab3000 to 0x000f55a0
Copying ACPI RSDP from 0x7aab4000 to 0x000f5570
rsdp=0x000f5570
rsdt=0x7aab4030
xsdt=0x7aab40e0
table(50434146)=0x7aab6bc0 (via xsdt)
pm_tmr_blk=1808
Using pmtimer, ioport 0x1808
init timer
rsdp=0x000f5570
rsdt=0x7aab4030
xsdt=0x7aab40e0
no table 324d5054 found
rsdp=0x000f5570
rsdt=0x7aab4030
xsdt=0x7aab40e0
no table 41504354 found
Scan for VGA option rom
Attempting to init PCI bdf 00:02.0 (vd 8086:3e90)
Turning on vga text mode console
SeaBIOS (version rel-1.14.0-2-g41289b8)
init usb
XHCI init on dev 00:14.0: regs @ 0x91000000, 20 ports, 64 slots, 32 byte contexts
XHCI    protocol USB  2.00, 10 ports (offset 1), def 3011
XHCI    protocol USB  3.00, 4 ports (offset 17), def 3000
XHCI    extcap 0xc0 @ 0x91008070
XHCI    extcap 0x1 @ 0x9100846c
XHCI    extcap 0xc6 @ 0x910084f4
XHCI    extcap 0xc7 @ 0x91008500
XHCI    extcap 0xc2 @ 0x91008600
XHCI    extcap 0xa @ 0x91008700
XHCI    extcap 0xc3 @ 0x91008740
XHCI    extcap 0xc4 @ 0x91008800
XHCI    extcap 0xc5 @ 0x91008900
/7aa63000\ Start thread
|7aa63000| configure_xhci: resetting
init ps2port
/7aa61000\ Start thread
|7aa61000| WARNING - Timeout at i8042_flush:71!
\7aa61000/ End thread
|7aa63000| configure_xhci: setup 34 scratch pad buffers
init floppy drives
init hard drives
init ahci
AHCI controller at 00:17.0, iobase 0x9102a000, irq 0
AHCI: cap 0xe334ff43, ports_impl 0xf
/7aa61000\ Start thread
|7aa61000| AHCI/0: probing
|7aa61000| AHCI/0: link up
/7aa60000\ Start thread
/7aa5f000\ Start thread
|7aa5f000| AHCI/1: probing
|7aa61000| AHCI/0: ... finished, status 0x51, ERROR 0x4
/7aa5d000\ Start thread
/7aa5c000\ Start thread
|7aa5c000| AHCI/2: probing
|7aa5f000| AHCI/1: link down
|7aa61000| Searching bootorder for: /pci@i0cf8/*@17/drive@0/disk@0
|7aa61000| AHCI/0: supported modes: udma 6, multi-dma 2, pio 4
|7aa61000| AHCI/0: Set transfer mode to UDMA-6
/7aa5b000\ Start thread
|7aa5b000| xhci_hub_reset port #3: 0x00020ae1, powered, pls 7, speed 2 [Low]
/7aa5a000\ Start thread
|7aa5a000| AHCI/3: probing
|7aa5c000| AHCI/2: link down
\7aa5f000/ End thread
|7aa61000| Searching bios-geometry for: /pci@i0cf8/*@17/drive@0/disk@0
/7aa5f000\ Start thread
Searching bootorder for: HALT
init megasas
init nvme
init lpt
Found 0 lpt ports
init serial
Found 1 serial ports
|7aa5a000| AHCI/3: link down
\7aa5c000/ End thread
|7aa61000| AHCI/0: registering: "AHCI/0: INTEL SSDSA2CW080G3 ATA-8 Hard-Disk (74 GiBytes)"
|7aa61000| Registering bootable: AHCI/0: INTEL SSDSA2CW080G3 ATA-8 Hard-Disk (74 GiBytes) (type:2 prio:103 data:f5500)
\7aa61000/ End thread
/7aa61000\ Start thread
\7aa61000/ End thread
\7aa5f000/ End thread
|7aa5b000| XHCI port #3: 0x00200a03, powered, enabled, pls 0, speed 2 [Low]
|7aa5b000| set_address 0x7aab2fb0
\7aa5d000/ End thread
\7aa60000/ End thread
\7aa5a000/ End thread
/7aa61000\ Start thread
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa5b000| xhci_alloc_pipe: usbdev 0x7aa5e7b0, ring 0x7aab2000, slotid 0, epid 1
|7aa5b000| xhci_cmd_enable_slot:
|7aa5b000| xhci_trb_queue: ring 0x7aab2c00 [nidx 1, len 0]
|7aa5b000| xhci_doorbell: slotid 0, epid 0
|7aa5b000| xhci_process_events port #3: 0x00200a03, powered, enabled, pls 0, speed 2 [Low]
|7aa5b000| xhci_process_events port #6: 0x00020ae1, powered, pls 7, speed 2 [Low]
|7aa5b000| xhci_process_events port #3: 0x00000a03, powered, enabled, pls 0, speed 2 [Low]
|7aa5b000| xhci_process_events: ring 0x7aab2c00 [trb 0x7aab2c00, evt 0x7aab2d00, type 33, eidx 1, cc 1]
|7aa5b000| xhci_alloc_pipe: enable slot: got slotid 1
|7aa5b000| xhci_cmd_address_device: slotid 1
|7aa5b000| xhci_trb_queue: ring 0x7aab2c00 [nidx 2, len 0]
|7aa5b000| xhci_doorbell: slotid 0, epid 0
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa5b000| xhci_process_events: ring 0x7aab2c00 [trb 0x7aab2c10, evt 0x7aab2d00, type 33, eidx 2, cc 1]
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa5b000| xhci_realloc_pipe: usbdev 0x7aa5e7b0, ring 0x7aab2000, slotid 1, epid 1
|7aa5b000| config_usb: 0x7aab2120
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 1, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 2, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 3, len 0]
|7aa5b000| xhci_doorbell: slotid 1, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_hub_reset port #6: 0x00000ae1, powered, pls 7, speed 2 [Low]
|7aa5b000| xhci_process_events: ring 0x7aab2000 [trb 0x7aab2020, evt 0x7aab2100, type 32, eidx 3, cc 1]
|7aa5b000| device rev=0110 cls=00 sub=00 proto=00 size=8
|7aa5b000| xhci_realloc_pipe: usbdev 0x7aa5e7b0, ring 0x7aab2000, slotid 1, epid 1
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 4, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 5, len 9]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 6, len 0]
|7aa5b000| xhci_doorbell: slotid 1, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa5b000| xhci_process_events: ring 0x7aab2000 [trb 0x7aab2050, evt 0x7aab2100, type 32, eidx 6, cc 1]
|7aa5b000| xhci_process_events port #6: 0x00200a03, powered, enabled, pls 0, speed 2 [Low]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 7, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 8, len 59]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 9, len 0]
|7aa5b000| xhci_doorbell: slotid 1, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| XHCI port #6: 0x00000a03, powered, enabled, pls 0, speed 2 [Low]
|7aa61000| set_address 0x7aab2fb0
|7aa5b000| xhci_process_events: ring 0x7aab2000 [trb 0x7aab2080, evt 0x7aab2100, type 32, eidx 9, cc 1]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 10, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 11, len 0]
|7aa5b000| xhci_doorbell: slotid 1, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_alloc_pipe: usbdev 0x7aa64000, ring 0x7aa8fa00, slotid 0, epid 1
|7aa61000| xhci_cmd_enable_slot:
|7aa61000| xhci_trb_queue: ring 0x7aab2c00 [nidx 3, len 0]
|7aa61000| xhci_doorbell: slotid 0, epid 0
|7aa61000| xhci_process_events: ring 0x7aab2000 [trb 0x7aab20a0, evt 0x7aab2100, type 32, eidx 11, cc 1]
|7aa61000| xhci_process_events: ring 0x7aab2c00 [trb 0x7aab2c20, evt 0x7aab2d00, type 33, eidx 3, cc 1]
|7aa61000| xhci_alloc_pipe: enable slot: got slotid 2
|7aa61000| xhci_cmd_address_device: slotid 2
|7aa61000| xhci_trb_queue: ring 0x7aab2c00 [nidx 4, len 0]
|7aa61000| xhci_doorbell: slotid 0, epid 0
|7aa5b000| usb_hid_setup 0x7aab2120
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 12, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 13, len 0]
|7aa5b000| xhci_doorbell: slotid 1, epid 1
|7aa5b000| xhci_process_events: ring 0x7aab2c00 [trb 0x7aab2c30, evt 0x7aab2d00, type 33, eidx 4, cc 1]
|7aa5b000| xhci_process_events: ring 0x7aab2000 [trb 0x7aab20c0, evt 0x7aab2100, type 32, eidx 13, cc 1]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 14, len 8]
|7aa5b000| xhci_trb_queue: ring 0x7aab2000 [nidx 15, len 0]
|7aa5b000| xhci_doorbell: slotid 1, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_process_events: ring 0x7aab2000 [trb 0x7aab20e0, evt 0x7aab2100, type 32, eidx 15, cc 1]
|7aa5b000| xhci_alloc_pipe: usbdev 0x7aa5e7b0, ring 0x000eb200, slotid 0, epid 3
|7aa5b000| xhci_cmd_configure_endpoint: slotid 1, add 0x9, del 0x0
|7aa5b000| xhci_trb_queue: ring 0x7aab2c00 [nidx 5, len 0]
|7aa5b000| xhci_doorbell: slotid 0, epid 0
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_realloc_pipe: usbdev 0x7aa64000, ring 0x7aa8fa00, slotid 2, epid 1
|7aa61000| config_usb: 0x7aa8fb20
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 1, len 8]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 2, len 8]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 3, len 0]
|7aa61000| xhci_doorbell: slotid 2, epid 1
|7aa61000| xhci_process_events: ring 0x7aab2c00 [trb 0x7aab2c40, evt 0x7aab2d00, type 33, eidx 5, cc 1]
|7aa61000| xhci_process_events: ring 0x7aa8fa00 [trb 0x7aa8fa20, evt 0x7aa8fb00, type 32, eidx 3, cc 1]
|7aa61000| device rev=0200 cls=00 sub=00 proto=00 size=8
|7aa61000| xhci_realloc_pipe: usbdev 0x7aa64000, ring 0x7aa8fa00, slotid 2, epid 1
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 4, len 8]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 5, len 9]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 6, len 0]
|7aa61000| xhci_doorbell: slotid 2, epid 1
|7aa5b000| USB keyboard initialized
\7aa5b000/ End thread
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_process_events: ring 0x7aa8fa00 [trb 0x7aa8fa50, evt 0x7aa8fb00, type 32, eidx 6, cc 1]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 7, len 8]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 8, len 59]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 9, len 0]
|7aa61000| xhci_doorbell: slotid 2, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_process_events: ring 0x7aa8fa00 [trb 0x7aa8fa80, evt 0x7aa8fb00, type 32, eidx 9, cc 1]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 10, len 8]
|7aa61000| xhci_trb_queue: ring 0x7aa8fa00 [nidx 11, len 0]
|7aa61000| xhci_doorbell: slotid 2, epid 1
/7aa60000\ Start thread
\7aa60000/ End thread
|7aa61000| xhci_process_events: ring 0x7aa8fa00 [trb 0x7aa8faa0, evt 0x7aa8fb00, type 32, eidx 11, cc 1]
|7aa61000| usb_hid_setup 0x7aa8fb20
\7aa61000/ End thread
/7aa61000\ Start thread
\7aa61000/ End thread
/7aa61000\ Start thread
\7aa61000/ End thread
\7aa63000/ End thread
All threads complete.
Scan for option roms
Attempting to init PCI bdf 00:00.0 (vd 8086:3e0f)
Attempting to init PCI bdf 00:01.0 (vd 8086:1901)
Attempting to init PCI bdf 00:08.0 (vd 8086:1911)
Attempting to init PCI bdf 00:14.2 (vd 8086:a2b1)
Attempting to init PCI bdf 00:16.0 (vd 8086:a2ba)
Attempting to init PCI bdf 00:1f.0 (vd 8086:a2ca)
Attempting to init PCI bdf 00:1f.2 (vd 8086:a2a1)
Attempting to init PCI bdf 00:1f.3 (vd 8086:a2f0)
Attempting to init PCI bdf 00:1f.4 (vd 8086:a2a3)
Attempting to init PCI bdf 00:1f.5 (vd 8086:a2a4)

Press ESC for boot menu.

Checking for bootsplash