Nick: monisteren E-mail: monisteren@gmail.com Board: ASUS Z270K Contents: Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x3b, id2 0xf2, id1 is normal flash content, id2 is $ Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x3b, id2 0xf2, id1 is normal flash content, id2 is$ Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). Reading ich descriptor... Reading 4096 bytes starting at 0x000000. done. Assuming chipset '100 series Sunrise Point'. Using region: "bios". Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... Reading 14155776 bytes starting at 0x280000. done. Erasing and writing flash chip... Trying erase function 0... 0x280000-0x280fff:EErasing 4096 bytes starting at 0x2$ HSFC used for block erasing: HSFC: FGO=1, HSFC=3, WET=0, FDBC=63, SME=0 Transaction error between offset 0x00280000 and 0x00280fff (= 0x00280000 + 4095)! HSFS: FDONE=1, FCERR=1, AEL=0, SCIP=0, PRR34_LOCKDN=0, WRSDIS=0, FDOPSS=1, FDV=1, FLOCKDN=1 HSFC: FGO=0, HSFC=3, WET=0, FDBC=63, SME=0 Reading current flash chip contents... Reading 14155776 bytes starting at 0x280000. done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed.