Nick: hell__ E-mail: NULL Board: Toshiba Satellite Pro L70-A Contents: $ sudo flashrom -p internal -r wontwork.rom flashrom v1.2-70-g2493cee on Linux 5.7.8-arch1-1 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Cannot open file stream for /dev/mtd0 No DMI table found. Found chipset "Intel HM86". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... SPI Configuration is locked down. FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. FREG2: Management Engine region (0x00001000-0x0017ffff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see https://flashrom.org/ME for details. PR0: Warning: 0x00700000-0x007fffff is read-only. PR1: Warning: 0x001a2000-0x006a1fff is read-only. At least some flash regions are read protected. You have to use a flash layout and include only accessible regions. For write operations, you'll additionally need the --noverify-all switch. See manpage for more details. OK. Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) mapped at physical address 0x00000000ff800000. Reading flash... Transaction error! Read operation failed! FAILED.