Nick: cfeedback
E-mail: kaleaaron80@gmail.com
Board: flash
Contents: 
tester@archlinux /boot/efi % sudo flashrom -p internal -w newmod5patched_SLIC.rom 
flashrom v1.1-rc1-96-g9e2dc2f on Linux 5.3.4-arch1-1-ARCH (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found chipset "Intel H61".
Enabling flash write... Warning: BIOS region SMM protection is enabled!
Warning: Setting Bios Control at 0xdc from 0x2a to 0x09 failed.
New value is 0x2a.
SPI Configuration is locked down.
OK.
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) mapped at physical address 0x00000000ff800000.
Reading old flash chip contents... done.
Erasing and writing flash chip... Transaction error!
spi_write_cmd failed during command execution at address 0x430000
Reading current flash chip contents... done. Looking for another erase function.
spi_write_cmd failed during command execution at address 0x430000
Reading current flash chip contents... done. Looking for another erase function.
spi_write_cmd failed during command execution at address 0x430000
Reading current flash chip contents... done. Looking for another erase function.
spi_simple_write_cmd failed during command execution
Reading current flash chip contents... done. Looking for another erase function.
spi_simple_write_cmd failed during command execution
Reading current flash chip contents... done. Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Apparently at least some data has changed.
Your flash chip is in an unknown state.
Get help on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org with the subject "FAILED: <your board name>"!