Nick: Hellsenberg E-mail: none Board: Sony VPCEH Contents: [ 0.000000] Linux version 4.20.10-arch1-1-ARCH (builduser@heftig-26504) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Fri Feb 15 17:49:06 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6979da9a-27e7-4d28-ae2e-7162c5630004 rw quiet iomem=relaxed audit=0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff3f000-0x00000000829fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027cdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Sony Corporation VPCEH2K1E/VPCEH2K1E, BIOS 4.9-744-g72cda6e3f8-dirty 02/19/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2195.003 MHz processor [ 0.002592] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002594] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002599] last_pfn = 0x27ce00 max_arch_pfn = 0x400000000 [ 0.002604] MTRR default type: uncachable [ 0.002605] MTRR fixed ranges enabled: [ 0.002606] 00000-9FFFF write-back [ 0.002607] A0000-BFFFF uncachable [ 0.002608] C0000-FFFFF write-back [ 0.002609] MTRR variable ranges enabled: [ 0.002611] 0 base 000000000 mask F80000000 write-back [ 0.002612] 1 base 0D0000000 mask FF0000000 write-combining [ 0.002613] 2 base 0E0000000 mask FFE000000 write-combining [ 0.002615] 3 base 100000000 mask F00000000 write-back [ 0.002616] 4 base 200000000 mask F80000000 write-back [ 0.002616] 5 disabled [ 0.002617] 6 disabled [ 0.002618] 7 disabled [ 0.002618] 8 disabled [ 0.002619] 9 disabled [ 0.003652] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003852] last_pfn = 0x7ff3f max_arch_pfn = 0x400000000 [ 0.016262] check: Scanning 1 areas for low memory corruption [ 0.016265] Base memory trampoline at [(____ptrval____)] 99000 size 24576 [ 0.016271] BRK [0x19b001000, 0x19b001fff] PGTABLE [ 0.016274] BRK [0x19b002000, 0x19b002fff] PGTABLE [ 0.016275] BRK [0x19b003000, 0x19b003fff] PGTABLE [ 0.016304] BRK [0x19b004000, 0x19b004fff] PGTABLE [ 0.016307] BRK [0x19b005000, 0x19b005fff] PGTABLE [ 0.016440] BRK [0x19b006000, 0x19b006fff] PGTABLE [ 0.016470] BRK [0x19b007000, 0x19b007fff] PGTABLE [ 0.016602] RAMDISK: [mem 0x3649b000-0x37244fff] [ 0.016610] ACPI: Early table checksum verification disabled [ 0.016691] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) [ 0.016694] ACPI: XSDT 0x000000007FF520E0 00004C (v01 COREv4 COREBOOT 00000000 CORE 00000000) [ 0.016700] ACPI: FACP 0x000000007FF54830 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000) [ 0.016706] ACPI: DSDT 0x000000007FF52280 0025AF (v02 COREv4 COREBOOT 20141018 INTL 20190108) [ 0.016710] ACPI: FACS 0x000000007FF52240 000040 [ 0.016713] ACPI: FACS 0x000000007FF52240 000040 [ 0.016716] ACPI: SSDT 0x000000007FF54930 002F65 (v02 COREv4 COREBOOT 0000002A CORE 0000002A) [ 0.016719] ACPI: MCFG 0x000000007FF578A0 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000) [ 0.016723] ACPI: APIC 0x000000007FF578E0 00008C (v02 COREv4 COREBOOT 00000000 CORE 00000000) [ 0.016726] ACPI: HPET 0x000000007FF57970 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000) [ 0.016736] ACPI: Local APIC address 0xfee00000 [ 0.016824] No NUMA configuration found [ 0.016825] Faking a node at [mem 0x0000000000000000-0x000000027cdfffff] [ 0.016829] NODE_DATA(0) allocated [mem 0x27cdf7000-0x27cdfafff] [ 0.016856] Zone ranges: [ 0.016857] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.016859] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.016860] Normal [mem 0x0000000100000000-0x000000027cdfffff] [ 0.016861] Device empty [ 0.016862] Movable zone start for each node [ 0.016863] Early memory node ranges [ 0.016864] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.016864] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.016865] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.016866] node 0: [mem 0x0000000040200000-0x000000007ff3efff] [ 0.016867] node 0: [mem 0x0000000100000000-0x000000027cdfffff] [ 0.016898] Zeroed struct page in unavailable ranges: 1315 pages [ 0.016899] Initmem setup node 0 [mem 0x0000000000001000-0x000000027cdfffff] [ 0.016901] On node 0 totalpages: 2083037 [ 0.016902] DMA zone: 64 pages used for memmap [ 0.016903] DMA zone: 21 pages reserved [ 0.016904] DMA zone: 3998 pages, LIFO batch:0 [ 0.017036] DMA32 zone: 8109 pages used for memmap [ 0.017037] DMA32 zone: 518975 pages, LIFO batch:63 [ 0.035152] Normal zone: 24376 pages used for memmap [ 0.035154] Normal zone: 1560064 pages, LIFO batch:63 [ 0.084486] ACPI: PM-Timer IO Port: 0x508 [ 0.084489] ACPI: Local APIC address 0xfee00000 [ 0.084508] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.084511] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.084513] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.084514] ACPI: IRQ0 used by override. [ 0.084516] ACPI: IRQ9 used by override. [ 0.084518] Using ACPI (MADT) for SMP configuration information [ 0.084520] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.084525] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.084539] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.084540] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.084541] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.084542] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.084543] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.084545] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.084546] PM: Registered nosave memory: [mem 0x7ff3f000-0x829fffff] [ 0.084547] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] [ 0.084548] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.084548] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] [ 0.084551] [mem 0x82a00000-0xefffffff] available for PCI devices [ 0.084552] Booting paravirtualized kernel on bare hardware [ 0.084555] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.229186] random: get_random_bytes called from start_kernel+0x95/0x548 with crng_init=0 [ 0.229193] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.229431] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144 [ 0.229439] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.229440] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229461] Built 1 zonelists, mobility grouping on. Total pages: 2050467 [ 0.229461] Policy zone: Normal [ 0.229463] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6979da9a-27e7-4d28-ae2e-7162c5630004 rw quiet iomem=relaxed audit=0 [ 0.229533] audit: disabled (until reboot) [ 0.233669] Calgary: detecting Calgary via BIOS EBDA area [ 0.233675] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.257039] Memory: 8090768K/8332148K available (12293K kernel code, 1268K rwdata, 3692K rodata, 1536K init, 3936K bss, 241380K reserved, 0K cma-reserved) [ 0.257225] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.257231] Kernel/User page tables isolation: enabled [ 0.257248] ftrace: allocating 35811 entries in 140 pages [ 0.273937] rcu: Preemptible hierarchical RCU implementation. [ 0.273939] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.273940] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.273941] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.273941] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.273942] Tasks RCU enabled. [ 0.273943] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.273944] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.275780] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 [ 0.275946] rcu: Offload RCU callbacks from CPUs: (none). [ 0.275997] Console: colour dummy device 80x25 [ 0.276001] printk: console [tty0] enabled [ 0.276022] ACPI: Core revision 20181003 [ 0.276197] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.276210] hpet clockevent registered [ 0.276215] APIC: Switch to symmetric I/O mode setup [ 0.276286] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.276742] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.292882] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3c269bc1, max_idle_ns: 440795258167 ns [ 0.292898] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.92 BogoMIPS (lpj=7316676) [ 0.292901] pid_max: default: 32768 minimum: 301 [ 0.292937] LSM: Security Framework initializing [ 0.292938] Yama: becoming mindful. [ 0.292943] AppArmor: AppArmor disabled by boot time parameter [ 0.294157] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.294769] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.294803] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.294824] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.295084] mce: CPU supports 9 MCE banks [ 0.295094] CPU0: Thermal monitoring enabled (TM1) [ 0.295104] process: using mwait in idle threads [ 0.295108] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.295109] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.295111] Spectre V2 : Mitigation: Full generic retpoline [ 0.295112] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.295112] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.295122] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.295122] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.295124] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.295288] Freeing SMP alternatives memory: 28K [ 0.296398] TSC deadline timer enabled [ 0.296402] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.316241] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.316305] ... version: 3 [ 0.316307] ... bit width: 48 [ 0.316309] ... generic registers: 4 [ 0.316312] ... value mask: 0000ffffffffffff [ 0.316314] ... max period: 00007fffffffffff [ 0.316316] ... fixed-purpose events: 3 [ 0.316318] ... event mask: 000000070000000f [ 0.322895] rcu: Hierarchical SRCU implementation. [ 0.346458] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.352913] smp: Bringing up secondary CPUs ... [ 0.392925] x86: Booting SMP configuration: [ 0.392928] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.656285] smp: Brought up 1 node, 8 CPUs [ 0.656285] smpboot: Max logical packages: 1 [ 0.656285] smpboot: Total of 8 processors activated (35134.38 BogoMIPS) [ 0.659936] devtmpfs: initialized [ 0.659936] x86/mm: Memory block size: 128MB [ 0.660393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.660393] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.660393] pinctrl core: initialized pinctrl subsystem [ 0.660393] RTC time: 15:50:33, date: 02/19/19 [ 0.660393] NET: Registered protocol family 16 [ 0.660393] cpuidle: using governor ladder [ 0.662910] cpuidle: using governor menu [ 0.662989] ACPI: bus type PCI registered [ 0.662991] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.663068] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.663072] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.663082] PCI: Using configuration type 1 for base access [ 0.663110] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.664478] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.664478] ACPI: Added _OSI(Module Device) [ 0.664478] ACPI: Added _OSI(Processor Device) [ 0.664478] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.664478] ACPI: Added _OSI(Processor Aggregator Device) [ 0.664478] ACPI: Added _OSI(Linux-Dell-Video) [ 0.664478] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.666112] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.669564] ACPI: Interpreter enabled [ 0.669564] ACPI: (supports S0 S3 S4 S5) [ 0.669564] ACPI: Using IOAPIC for interrupt routing [ 0.669564] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.669564] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.672884] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.672884] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.672884] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.672884] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.673107] PCI host bridge to bus 0000:00 [ 0.673110] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.673112] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.673113] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.673115] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.673117] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.673118] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.673120] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.673121] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.673123] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.673125] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.673126] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.673128] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.673129] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.673131] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.673133] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.673134] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.673136] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] [ 0.673138] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.673140] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.673149] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.673274] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.673317] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.673425] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000 [ 0.673436] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 0.673577] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.673602] pci 0000:00:1a.0: reg 0x10: [mem 0xe4a0e000-0xe4a0e3ff] [ 0.673692] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.673801] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.673826] pci 0000:00:1b.0: reg 0x10: [mem 0xe4a08000-0xe4a0bfff 64bit] [ 0.673907] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.674013] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.674105] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.674218] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400 [ 0.674357] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.674471] pci 0000:00:1c.3: [8086:1c1a] type 01 class 0x060400 [ 0.674563] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.674684] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.674709] pci 0000:00:1d.0: reg 0x10: [mem 0xe4a0f000-0xe4a0f3ff] [ 0.674798] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.674906] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.675113] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.675136] pci 0000:00:1f.2: reg 0x10: [io 0x5020-0x5027] [ 0.675145] pci 0000:00:1f.2: reg 0x14: [io 0x5030-0x5033] [ 0.675155] pci 0000:00:1f.2: reg 0x18: [io 0x5028-0x502f] [ 0.675164] pci 0000:00:1f.2: reg 0x1c: [io 0x5034-0x5037] [ 0.675173] pci 0000:00:1f.2: reg 0x20: [io 0x5000-0x501f] [ 0.675183] pci 0000:00:1f.2: reg 0x24: [mem 0xe4a0d000-0xe4a0d7ff] [ 0.675232] pci 0000:00:1f.2: PME# supported from D3hot [ 0.675333] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.675355] pci 0000:00:1f.3: reg 0x10: [mem 0xe4a10000-0xe4a100ff 64bit] [ 0.675377] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.675494] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000 [ 0.675521] pci 0000:00:1f.6: reg 0x10: [mem 0xe4a0c000-0xe4a0cfff 64bit] [ 0.675721] pci 0000:01:00.0: [10de:1055] type 00 class 0x030000 [ 0.675743] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff] [ 0.675758] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.675772] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref] [ 0.675782] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.675792] pci 0000:01:00.0: reg 0x30: [mem 0xe3000000-0xe307ffff pref] [ 0.675800] pci 0000:01:00.0: enabling Extended Tags [ 0.675879] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link) [ 0.675938] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 [ 0.675959] pci 0000:01:00.1: reg 0x10: [mem 0xe3080000-0xe3083fff] [ 0.676015] pci 0000:01:00.1: enabling Extended Tags [ 0.676128] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring [ 0.682931] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.682939] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.682946] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff] [ 0.682955] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] [ 0.683200] pci 0000:02:00.0: [8086:4232] type 00 class 0x028000 [ 0.683549] pci 0000:02:00.0: reg 0x10: [mem 0xe4800000-0xe4801fff 64bit] [ 0.683867] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.684305] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.684312] pci 0000:00:1c.0: bridge window [mem 0xe4800000-0xe48fffff] [ 0.684415] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.684454] pci 0000:03:00.0: reg 0x10: [mem 0xe3c00000-0xe3c00fff] [ 0.684633] pci 0000:03:00.0: supports D1 D2 [ 0.684635] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.684773] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.684778] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.684783] pci 0000:00:1c.1: bridge window [mem 0xe3400000-0xe3cfffff] [ 0.684790] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe47fffff 64bit pref] [ 0.684905] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.685036] pci 0000:04:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.685159] pci 0000:04:00.0: reg 0x18: [mem 0xe4904000-0xe4904fff 64bit pref] [ 0.685236] pci 0000:04:00.0: reg 0x20: [mem 0xe4900000-0xe4903fff 64bit pref] [ 0.685648] pci 0000:04:00.0: supports D1 D2 [ 0.685650] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.686003] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.686008] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.686016] pci 0000:00:1c.3: bridge window [mem 0xe4900000-0xe49fffff 64bit pref] [ 0.686217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.686217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.689557] ec: probe of PNP0C09:00 failed with error -22 [ 0.689571] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.689571] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.689571] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.689571] vgaarb: loaded [ 0.689721] ACPI: bus type USB registered [ 0.689739] usbcore: registered new interface driver usbfs [ 0.689746] usbcore: registered new interface driver hub [ 0.689777] usbcore: registered new device driver usb [ 0.689803] pps_core: LinuxPPS API ver. 1 registered [ 0.689804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.689806] PTP clock support registered [ 0.689814] EDAC MC: Ver: 3.0.0 [ 0.689936] PCI: Using ACPI for IRQ routing [ 0.691215] PCI: pci_cache_line_size set to 64 bytes [ 0.691333] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.691335] e820: reserve RAM buffer [mem 0x7ff3f000-0x7fffffff] [ 0.691336] e820: reserve RAM buffer [mem 0x27ce00000-0x27fffffff] [ 0.691392] NetLabel: Initializing [ 0.691392] NetLabel: domain hash size = 128 [ 0.691392] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.691392] NetLabel: unlabeled traffic allowed by default [ 0.693475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.693481] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.695516] clocksource: Switched to clocksource tsc-early [ 0.705591] VFS: Disk quotas dquot_6.6.0 [ 0.705615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.705690] pnp: PnP ACPI init [ 0.705918] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.705921] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.705923] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.705925] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.705927] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.705929] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.705931] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.705933] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.705935] system 00:00: [mem 0x20000000-0x201fffff] has been reserved [ 0.705937] system 00:00: [mem 0x40000000-0x401fffff] has been reserved [ 0.705944] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.706293] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.706299] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.706351] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.706353] system 00:02: [io 0x0480-0x04bf] has been reserved [ 0.706358] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.706383] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.706424] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.706458] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.706483] pnp: PnP ACPI: found 6 devices [ 0.712559] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.712596] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.712599] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.712602] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff] [ 0.712605] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] [ 0.712609] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.712615] pci 0000:00:1c.0: bridge window [mem 0xe4800000-0xe48fffff] [ 0.712624] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.712627] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.712633] pci 0000:00:1c.1: bridge window [mem 0xe3400000-0xe3cfffff] [ 0.712637] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe47fffff 64bit pref] [ 0.712644] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.712647] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.712656] pci 0000:00:1c.3: bridge window [mem 0xe4900000-0xe49fffff 64bit pref] [ 0.712664] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.712666] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.712668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.712669] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.712671] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.712673] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.712674] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.712676] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.712678] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.712679] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.712681] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.712683] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.712685] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.712686] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.712688] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.712690] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.712692] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window] [ 0.712693] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] [ 0.712695] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.712697] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe30fffff] [ 0.712699] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref] [ 0.712701] pci_bus 0000:02: resource 1 [mem 0xe4800000-0xe48fffff] [ 0.712702] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.712704] pci_bus 0000:03: resource 1 [mem 0xe3400000-0xe3cfffff] [ 0.712706] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe47fffff 64bit pref] [ 0.712708] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.712709] pci_bus 0000:04: resource 2 [mem 0xe4900000-0xe49fffff 64bit pref] [ 0.712809] NET: Registered protocol family 2 [ 0.713038] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.713079] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.713222] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.713351] TCP: Hash tables configured (established 65536 bind 65536) [ 0.713394] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.713423] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.713498] NET: Registered protocol family 1 [ 0.713504] NET: Registered protocol family 44 [ 0.714023] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.714037] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.714133] PCI: CLS 64 bytes, default 64 [ 0.714180] Unpacking initramfs... [ 0.740532] Freeing initrd memory: 13992K [ 0.740552] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.740554] software IO TLB: mapped [mem 0x7bf3f000-0x7ff3f000] (64MB) [ 0.740798] check: Scanning for low memory corruption every 60 seconds [ 0.741445] Initialise system trusted keyrings [ 0.741456] Key type blacklist registered [ 0.741506] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 0.743022] zbud: loaded [ 0.792814] Key type asymmetric registered [ 0.792816] Asymmetric key parser 'x509' registered [ 0.792832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.792874] io scheduler noop registered [ 0.792875] io scheduler deadline registered [ 0.792925] io scheduler cfq registered (default) [ 0.792926] io scheduler mq-deadline registered [ 0.792927] io scheduler kyber registered [ 0.792971] io scheduler bfq registered [ 0.793386] pcieport 0000:00:01.0: Signaling PME with IRQ 24 [ 0.793610] pcieport 0000:00:1c.0: Signaling PME with IRQ 25 [ 0.793841] pcieport 0000:00:1c.1: Signaling PME with IRQ 26 [ 0.793872] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.794148] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 [ 0.794216] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.794295] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.794296] vesafb: scrolling: redraw [ 0.794298] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.794309] vesafb: framebuffer at 0xe1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 0.794358] fbcon: Deferring console take-over [ 0.794359] fb0: VESA VGA frame buffer device [ 0.794375] intel_idle: MWAIT substates: 0x21120 [ 0.794376] intel_idle: v0.4.1 model 0x2A [ 0.794765] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.794843] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.794922] ACPI: Power Button [PWRF] [ 0.794994] ACPI: Video Device [DEV0] (multi-head: no rom: yes post: no) [ 0.795110] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input1 [ 0.796641] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.798205] usbcore: registered new interface driver usbserial_generic [ 0.798211] usbserial: USB Serial support registered for generic [ 0.798234] rtc_cmos 00:03: RTC can wake from S4 [ 0.798387] rtc_cmos 00:03: registered as rtc0 [ 0.798408] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.798461] intel_pstate: Intel P-state driver initializing [ 0.799192] ledtrig-cpu: registered to indicate activity on CPUs [ 0.799938] NET: Registered protocol family 10 [ 0.819462] Segment Routing with IPv6 [ 0.819536] NET: Registered protocol family 17 [ 0.821455] RAS: Correctable Errors collector initialized. [ 0.821607] microcode: sig=0x206a7, pf=0x10, revision=0x2e [ 0.822159] microcode: Microcode Update Driver: v2.2. [ 0.822186] sched_clock: Marking stable (821893307, 250035)->(831382334, -9238992) [ 0.822815] registered taskstats version 1 [ 0.822827] Loading compiled-in X.509 certificates [ 0.828002] Loaded X.509 cert 'Build time autogenerated kernel key: 9666060381bbf28d52cb83131cf9eba0f1023b45' [ 0.828044] zswap: loaded using pool lzo/zbud [ 0.842361] Key type big_key registered [ 0.843057] Magic number: 7:780:841 [ 0.843179] rtc_cmos 00:03: setting system clock to 2019-02-19 15:50:34 UTC (1550591434) [ 0.846868] Freeing unused decrypted memory: 2040K [ 0.847621] Freeing unused kernel image memory: 1536K [ 0.873076] Write protecting the kernel read-only data: 18432k [ 0.874716] Freeing unused kernel image memory: 2016K [ 0.875189] Freeing unused kernel image memory: 404K [ 0.891022] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.891023] x86/mm: Checking user space page tables [ 0.900588] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.900590] Run /init as init process [ 0.925133] fbcon: Taking over console [ 0.925201] Console: switching to colour frame buffer device 80x30 [ 0.980857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.982320] ehci-pci: EHCI PCI platform driver [ 0.982509] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.982518] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.982532] ehci-pci 0000:00:1a.0: debug port 2 [ 0.986452] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.986470] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe4a0e000 [ 0.989595] SCSI subsystem initialized [ 0.997488] libata version 3.00 loaded. [ 0.999573] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.999628] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 0.999630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.999632] usb usb1: Product: EHCI Host Controller [ 0.999633] usb usb1: Manufacturer: Linux 4.20.10-arch1-1-ARCH ehci_hcd [ 0.999635] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.999767] hub 1-0:1.0: USB hub found [ 0.999775] hub 1-0:1.0: 3 ports detected [ 1.000064] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.000069] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.000083] ehci-pci 0000:00:1d.0: debug port 2 [ 1.001419] ahci 0000:00:1f.2: version 3.0 [ 1.001587] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.003994] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.004009] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe4a0f000 [ 1.013032] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode [ 1.013038] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst [ 1.014234] scsi host0: ahci [ 1.014780] scsi host1: ahci [ 1.015137] scsi host2: ahci [ 1.015390] scsi host3: ahci [ 1.015612] scsi host4: ahci [ 1.015830] scsi host5: ahci [ 1.015961] ata1: SATA max UDMA/133 abar m2048@0xe4a0d000 port 0xe4a0d100 irq 29 [ 1.015963] ata2: DUMMY [ 1.015964] ata3: DUMMY [ 1.015968] ata4: SATA max UDMA/133 abar m2048@0xe4a0d000 port 0xe4a0d280 irq 29 [ 1.015969] ata5: DUMMY [ 1.015970] ata6: DUMMY [ 1.016243] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.016356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 1.016359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.016361] usb usb2: Product: EHCI Host Controller [ 1.016363] usb usb2: Manufacturer: Linux 4.20.10-arch1-1-ARCH ehci_hcd [ 1.016365] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.016541] hub 2-0:1.0: USB hub found [ 1.016560] hub 2-0:1.0: 3 ports detected [ 1.329603] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.329884] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.330187] ata1.00: ATA-11: KINGSTON SA400S37240G, SBFK71E0, max UDMA/133 [ 1.330193] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.330826] ata1.00: configured for UDMA/133 [ 1.341809] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5 [ 1.346282] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.477035] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.477043] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.477735] hub 1-1:1.0: USB hub found [ 1.477970] hub 1-1:1.0: 6 ports detected [ 1.493841] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.493849] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.494514] hub 2-1:1.0: USB hub found [ 1.494759] hub 2-1:1.0: 6 ports detected [ 1.657362] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.661403] ata4.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SN02, max UDMA/100 [ 1.671382] ata4.00: configured for UDMA/100 [ 1.681220] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SN02 PQ: 0 ANSI: 5 [ 1.734303] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.734331] sd 0:0:0:0: [sda] Write Protect is off [ 1.734334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.734367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.738794] sda: sda1 sda2 sda3 [ 1.739453] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.742931] tsc: Refined TSC clocksource calibration: 2195.013 MHz [ 1.742957] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns [ 1.742990] clocksource: Switched to clocksource tsc [ 1.756290] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 1.789655] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.789662] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.790270] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.883732] mmc0: new high speed SDHC card at address 1234 [ 1.892395] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 1.894932] mmcblk0: p1 [ 1.899500] random: fast init done [ 1.905977] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6436, bcdDevice=11.12 [ 1.905985] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.905990] usb 1-1.2: Product: Sony Visual Communication Camera [ 1.905995] usb 1-1.2: Manufacturer: LOEAAI10P2SF01821D05346 [ 2.305400] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.570872] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.586695] systemd[1]: Detected architecture x86-64. [ 2.593306] systemd[1]: Set hostname to . [ 2.774233] random: systemd: uninitialized urandom read (16 bytes read) [ 2.796799] random: systemd: uninitialized urandom read (16 bytes read) [ 2.797236] systemd[1]: Listening on LVM2 poll daemon socket. [ 2.797331] random: systemd: uninitialized urandom read (16 bytes read) [ 2.797402] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.797430] systemd[1]: Reached target Swap. [ 2.797537] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 2.797621] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.797649] systemd[1]: Reached target Paths. [ 2.800263] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.828927] EXT4-fs (sda1): re-mounted. Opts: stripe=32743,data=ordered [ 2.891691] systemd-journald[325]: Received request to flush runtime journal from PID 1 [ 3.038202] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181003/utaddress-213) [ 3.038209] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.038211] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213) [ 3.038215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.038215] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213) [ 3.038218] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.038219] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213) [ 3.038222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.038222] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.083762] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.083891] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.085759] i8042: Detected active multiplexing controller, rev 1.1 [ 3.086112] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.087764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.087824] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.087871] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.087913] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.087960] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.093041] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 3.093044] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 3.093046] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.093047] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 3.126785] media: Linux media interface: v0.10 [ 3.130881] iTCO_vendor_support: vendor-support=0 [ 3.136178] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.136239] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) [ 3.136366] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.154794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.165474] cryptd: max_cpu_qlen set to 1000 [ 3.178316] videodev: Linux video capture interface: v2.00 [ 3.179581] Linux agpgart interface v0.103 [ 3.190992] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.194361] libphy: r8169: probed [ 3.194978] r8169 0000:04:00.0 eth0: RTL8168e/8111e, f0:bf:97:03:5f:ca, XID 2c200000, IRQ 30 [ 3.194982] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.198899] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 3.205945] AVX version of gcm_enc/dec engaged. [ 3.205947] AES CTR mode by8 optimization enabled [ 3.213250] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.239717] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.239720] cfg80211: failed to load regulatory.db [ 3.242792] uvcvideo: Found UVC 1.00 device Sony Visual Communication Camera (0c45:6436) [ 3.248122] Intel(R) Wireless WiFi driver for Linux [ 3.248123] Copyright(c) 2003- 2015 Intel Corporation [ 3.249059] pcieport 0000:00:01.0: can't derive routing for PCI INT B [ 3.249061] snd_hda_intel 0000:01:00.1: PCI INT B: no GSI [ 3.249094] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.249099] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.254000] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm [ 3.267890] uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized! [ 3.267894] uvcvideo 1-1.2:1.0: Entity type for entity Processing 3 was not initialized! [ 3.267897] uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized! [ 3.268083] input: Sony Visual Communication Camer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10 [ 3.268179] usbcore: registered new interface driver uvcvideo [ 3.268180] USB Video Class driver (1.1.1) [ 3.278770] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. [ 3.279246] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 3.279249] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.279251] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0) [ 3.279252] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 3.279253] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 3.279255] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 3.279257] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 3.280369] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 3.292569] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec [ 3.292901] hdaudio hdaudioC0D3: Unable to bind the codec [ 3.293329] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 3.293414] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 3.384387] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 3.384391] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 3.384392] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 3.384395] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 3.459621] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.468294] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 3.483349] intel_rapl: Found RAPL domain package [ 3.483351] intel_rapl: Found RAPL domain core [ 3.523781] checking generic (e1000000 130000) vs hw (d0000000 10000000) [ 3.523783] checking generic (e1000000 130000) vs hw (e0000000 2000000) [ 3.523784] fb0: switching to nouveaufb from VESA VGA [ 3.523803] Console: switching to colour dummy device 80x25 [ 3.524109] nouveau 0000:01:00.0: NVIDIA GF119 (0d9150a1) [ 3.567921] nouveau 0000:01:00.0: bios: version 75.19.0c.00.03 [ 3.568658] nouveau 0000:01:00.0: fb: 1024 MiB DDR3 [ 3.639787] [TTM] Zone kernel: Available graphics memory: 4055392 kiB [ 3.639793] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.639795] [TTM] Initializing pool allocator [ 3.639809] [TTM] Initializing DMA pool allocator [ 3.639844] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 3.639846] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.639849] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.639850] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 3.639852] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034 [ 3.639854] nouveau 0000:01:00.0: DRM: DCB outp 01: 02014300 00000000 [ 3.639855] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010 [ 3.639857] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340 [ 3.639858] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002061 [ 3.639859] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147 [ 3.639860] nouveau 0000:01:00.0: DRM: DCB conn 03: 00001231 [ 3.639869] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400 [ 3.639870] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210 [ 3.639871] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211 [ 3.639873] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213 [ 3.640776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.640777] [drm] Driver supports precise vblank timestamp query. [ 3.641768] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 3.719933] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x60000, bo (____ptrval____) [ 3.720075] fbcon: nouveaufb (fb0) is primary device [ 3.927172] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 3.928126] RTL8211DN Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 4.146115] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 4.148866] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 4.158103] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 4.278868] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 4.307476] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 4.329157] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 4.372611] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input9 [ 4.378705] mousedev: PS/2 mouse device common for all mice [ 4.450037] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 4.480698] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 4.624071] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 4.757220] Console: switching to colour frame buffer device 170x48 [ 4.758295] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 4.770627] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 6.272928] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001 [ 6.656873] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 7.960757] random: crng init done [ 7.960765] random: 7 urandom warning(s) missed due to ratelimiting [ 13.310611] memstick0: switching to 4-bit parallel mode [ 13.314684] mspblk0: p1 [ 13.948594] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 14.070312] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 14.101556] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 16.837166] wlp2s0: authenticate with 18:64:72:16:c6:f1 [ 16.841474] wlp2s0: send auth to 18:64:72:16:c6:f1 (try 1/3) [ 16.893028] wlp2s0: authenticated [ 16.896272] wlp2s0: associate with 18:64:72:16:c6:f1 (try 1/3) [ 16.897144] wlp2s0: RX AssocResp from 18:64:72:16:c6:f1 (capab=0x11 status=0 aid=20) [ 16.900031] wlp2s0: associated [ 16.993208] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 18:64:72:16:c6:f1 [ 17.045578] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready