Nick: DanDare
E-mail: none
Board: D525MW
Contents: 
Calibrating delay loop... OK.
No DMI table found.
Found chipset "Intel NM10".
Enabling flash write... Warning: Setting Bios Control at 0xdc from 0x0a to 0x09 failed.
New value is 0x0a.
WARNING: SPI Configuration Lockdown activated.
PROBLEMS, continuing anyway
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) mapped at physical address 0x00000000fff00000.
No operations were specified.