Nick: sergey
E-mail: sergey2018kalinichev@yandex.ru
Board: GA-8IPE1000-G (rev. 3.x)
Contents: 
http://www.gigabyte.ru/products/page/mb/ga-8ipe1000-g_3x#kf in case you would try to find it I have rev.3.x :: GA-8IPE1000-G (rev. 3.x)

Calibrating delay loop... OK.
Found chipset "Intel ICH5/ICH5R".
Enabling flash write... OK.
Found SST flash chip "SST49LF002A/B" (256 kB, FWH) mapped at physical address 0xfffc0000.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0x23, failed byte count from 0x00000000-0x00000fff: 0xff5
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function.
FAILED at 0x00000000! Expected=0xff, Found=0x23, failed byte count from 0x00000000-0x00003fff: 0x3fb5
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Good, writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or flash
chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!
-----------------------------------------------------------------------------