Nick: xvilka
E-mail: xvilka@gmail.com
Board: Gigabyte GA-Z97MX Gaming 5
Contents: 
BUS: 0x00  Function: 0x00  Device: 0x14  VendorID: 0x8086  DeviceID: 0x8CB1
BUS: 0x00  Function: 0x00  Device: 0x03  VendorID: 0x8086  DeviceID: 0x0C0C
BUS: 0x00  Function: 0x00  Device: 0x1A  VendorID: 0x8086  DeviceID: 0x8CAD
BUS: 0x00  Function: 0x00  Device: 0x00  VendorID: 0x8086  DeviceID: 0x0C00
BUS: 0x00  Function: 0x00  Device: 0x1D  VendorID: 0x8086  DeviceID: 0x8CA6
BUS: 0x00  Function: 0x00  Device: 0x02  VendorID: 0x8086  DeviceID: 0x0412
BUS: 0x00  Function: 0x03  Device: 0x1F  VendorID: 0x8086  DeviceID: 0x8CA2
BUS: 0x02  Function: 0x00  Device: 0x00  VendorID: 0x1969  DeviceID: 0xE091
BUS: 0x00  Function: 0x00  Device: 0x1B  VendorID: 0x8086  DeviceID: 0x8CA0
BUS: 0x00  Function: 0x02  Device: 0x1C  VendorID: 0x8086  DeviceID: 0x8C94
BUS: 0x00  Function: 0x00  Device: 0x1F  VendorID: 0x8086  DeviceID: 0x8CC4
BUS: 0x00  Function: 0x00  Device: 0x1C  VendorID: 0x8086  DeviceID: 0x8C90
BUS: 0x00  Function: 0x00  Device: 0x16  VendorID: 0x8086  DeviceID: 0x8CBA
BUS: 0x00  Function: 0x02  Device: 0x1F  VendorID: 0x8086  DeviceID: 0x8C82
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: "Gigabyte Technology Co., Ltd."
DMI string system-product-name: "Z97MX-Gaming 5"
DMI string system-version: "To be filled by O.E.M."
DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd."
DMI string baseboard-product-name: "Z97MX-Gaming 5"
DMI string baseboard-version: "x.x"
W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: 00.
Please send the output of "flashrom -V -p internal" to 
flashrom@flashrom.org with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.
W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: 00.
Please send the output of "flashrom -V -p internal" to 
flashrom@flashrom.org with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.

.....

Found chipset "Intel Z97" with PCI ID 8086:8cc4.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with it,
then please email a report to flashrom@flashrom.org including a verbose (-V) log.
Thank you!
Enabling flash write... PCI: {00:1f.00}[f0] read op: val = 1 (4 bytes)Root Complex Register Block address = 0xfed1c000
PCI: {00:1f.00}[0] read op: val = 86 (1 bytes)IDs = 0x00000086
GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI)
Top Swap: enabled (A16(+) inverted)
PCI: {00:1f.00}[d0] read op: val = 33 (4 bytes)0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
PCI: {00:1f.00}[d4] read op: val = 67 (2 bytes)0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
PCI: {00:1f.00}[d9] read op: val = ff (1 bytes)PCI: {00:1f.00}[d8] read op: val = cf (1 bytes)0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode enabled
0xffe00000/0xffa00000 FWH decode enabled
0xffd80000/0xff980000 FWH decode enabled
0xffd00000/0xff900000 FWH decode enabled
0xffc80000/0xff880000 FWH decode enabled
0xffc00000/0xff800000 FWH decode enabled
0xff700000/0xff300000 FWH decode enabled
0xff600000/0xff200000 FWH decode enabled
0xff500000/0xff100000 FWH decode enabled
0xff400000/0xff000000 FWH decode enabled
Maximum FWH chip size: 0x100000 bytes
PCI: {00:1f.00}[dc] read op: val = 9 (1 bytes)SPI Read Configuration: prefetching enabled, caching enabled, PCI: {00:1f.00}[dc] read op: val = 9 (1 bytes)
BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
SPIBAR = 0x00000000006b0000 + 0x3800
0x04: 0xf008 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1
Warning: SPI Configuration Lockdown activated.
Reading OPCODES... done
        OP        Type      Pre-OP
op[0]: 0x02, write w/  addr, none
op[1]: 0x3b, read  w/  addr, none
op[2]: 0x20, write w/  addr, none
op[3]: 0x05, read  w/o addr, none
op[4]: 0x9f, read  w/o addr, none
op[5]: 0x01, write w/o addr, none
op[6]: 0x00, read  w/o addr, none
op[7]: 0x00, read  w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x00
0x06: 0x0000 (HSFC)
HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0
0x08: 0x00000000 (FADDR)
0x50: 0x0000ffff (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff
0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write.
0x58: 0x07ff0000 FREG1: BIOS region (0x00000000-0x007fffff) is read-write.
0x5C: 0x01ff0001 FREG2: Management Engine region (0x00001000-0x001fffff) is read-write.
0x60: 0x00007fff FREG3: Gigabit Ethernet region is unused.
0x64: 0x00007fff FREG4: Platform Data region is unused.
0x74: 0x00000000 (PR0 is unused)
0x78: 0x00000000 (PR1 is unused)
0x7C: 0x00000000 (PR2 is unused)
0x80: 0x00000000 (PR3 is unused)
0x84: 0x00000000 (PR4 is unused)
0x90: 0xc0 (SSFS)
SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0
0x91: 0xfc4010 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=4
0x94: 0x0006     (PREOP)
0x96: 0x043b     (OPTYPE)
0x98: 0x05203b02 (OPMENU)
0x9C: 0x0000019f (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xC4: 0x80802045 (LVSCC)
LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1
0xC8: 0x00002045 (UVSCC)
UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20
0xD0: 0x50444653 (FPB)
Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
=== Content Section ===
FLVALSIG 0x0ff0a55a
FLMAP0   0x02040003
FLMAP1   0x15100206
FLMAP2   0x00210120

--- Details ---
NR          (Number of Regions):                     3
FRBA        (Flash Region Base Address):         0x040
NC          (Number of Components):                  1
FCBA        (Flash Component Base Address):      0x030
ISL         (ICH/PCH Strap Length):                 21
FISBA/FPSBA (Flash ICH/PCH Strap Base Address):  0x100
NM          (Number of Masters):                     3
FMBA        (Flash Master Base Address):         0x060
MSL/PSL     (MCH/PROC Strap Length):                 1
FMSBA       (Flash MCH/PROC Strap Base Address): 0x200

=== Component Section ===
FLCOMP   0x64900044
FLILL    0xad604221

--- Details ---
Component 1 density:            8 MB
Component 2 is not used.
Read Clock Frequency:           20 MHz
Read ID and Status Clock Freq.: 50 MHz
Write and Erase Clock Freq.:    50 MHz
Fast Read is supported.
Fast Read Clock Frequency:      50 MHz
Dual Output Fast Read Support:  disabled
Invalid instruction 0:          0x21
Invalid instruction 1:          0x42
Invalid instruction 2:          0x60
Invalid instruction 3:          0xad

=== Region Section ===
FLREG0   0x00000000
FLREG1   0x07ff0000
FLREG2   0x01ff0001
FLREG3   0x00007fff
FLREG4   0x00007fff

--- Details ---
Region 0 (Descr.) 0x00000000 - 0x00000fff
Region 1 (BIOS  ) 0x00000000 - 0x007fffff
Region 2 (ME    ) 0x00001000 - 0x001fffff
Region 3 (GbE   ) is unused.
Region 4 (Platf.) is unused.

=== Master Section ===
FLMSTR1  0xffff0000
FLMSTR2  0xffff0000
FLMSTR3  0xffff0118

--- Details ---
      Descr. BIOS ME GbE Platf.
BIOS    rw    rw  rw  rw   rw
ME      rw    rw  rw  rw   rw
GbE     rw    rw  rw  rw   rw

checking for opcode 0x03
Enabling hardware sequencing because some important opcode is locked.
OK.

....

Probing for Programmer Opaque flash chip, 0 kB: Hardware sequencing reports 1 attached SPI flash chip with a density of 8192 kB.
The flash address space (0x000000 - 0x7fffff) is divided at address 0x653000 in two partitions.
The first partition ranges from 0x000000 to 0x652fff.
In that range are 1619 erase blocks with 4096 B each.
The second partition ranges from 0x653000 to 0x7fffff.
In that range are 429 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) mapped at physical address 0x0000000000000000.

....

Reading the flash chip...
Libflashrom: loading layout...
Parsing layout file "gigabyte_z97mx_g5.layout" according to version 2.
Parsing line 2 of "gigabyte_z97mx_g5.layout".
String to parse: "0x00000000:0x00000fff descr".
unquoting 'descr'
unquote_string: start='descr', end=''
Parsed entry: 0x000000 (bottom-aligned) : 0x000fff (bottom-aligned) named "descr"
Looking for region "descr"... not found.
Parsing line 3 of "gigabyte_z97mx_g5.layout".
String to parse: "0x00000000:0x007fffff BIOS".
unquoting 'BIOS'
unquote_string: start='BIOS', end=''
Parsed entry: 0x000000 (bottom-aligned) : 0x7fffff (bottom-aligned) named "BIOS"
Looking for region "BIOS"... not found.
Parsing line 4 of "gigabyte_z97mx_g5.layout".
String to parse: "0x00001000:0x001fffff ME".
unquoting 'ME'
unquote_string: start='ME', end=''
Parsed entry: 0x001000 (bottom-aligned) : 0x1fffff (bottom-aligned) named "ME"
Looking for region "ME"... not found.
Parsing line 5 of "gigabyte_z97mx_g5.layout".
unquoting 'BIOS'
unquote_string: start='BIOS', end=''
Looking for region "BIOS"... found.
Using regions: "BIOS".