Nick: jmpy
E-mail: jorge@jmtech.com.py
Board: jmpy
Contents: 
root@odroid:/home/odroid/flashrom-0.9.7# ./flashrom -p linux_spi:dev=/dev/spidev1.0 
flashrom v0.9.7-r1711 on Linux 3.8.13.28 (armv7l)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on linux_spi.
No operations were specified.





root@odroid:/home/odroid/flashrom-0.9.7# ./flashrom -p linux_spi:dev=/dev/spidev1.0 -E
flashrom v0.9.7-r1711 on Linux 3.8.13.28 (armv7l)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on linux_spi.
Erasing and writing flash chip... linux_spi_send_command: ioctl: Input/output error
Verification impossible because read failed at 0x0 (len 0x1000)
ERASE FAILED!
Reading current flash chip contents... linux_spi_send_command: ioctl: Input/output error
Can't read anymore! Aborting.
FAILED!
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!