Nick: idwer
E-mail: none
Board: successful write with -p nicintel_spi
Contents: 
$ sudo ./flashrom -p nicintel_spi -V -w nicintel_spi.rom -c M25P10.RES
flashrom v0.9.3-r1216 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 7 usecs, 2089M loops per second, 10 myus = 12 us, 100 myus = 123 us, 1000 myus = 1067 us, 10000 myus = 10312 us, 28 myus = 60 us, OK.
Initializing nicintel_spi programmer
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:03.0).
Requested BAR is MEM, 32bit, not prefetchable
Probing for ST M25P10.RES, 128 KB: probe_spi_res1: id 0x10
Chip status register is 00
Found chip "ST M25P10.RES" (128 KB, SPI) at physical address 0xfffe0000.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Reading old flash chip contents...
Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x007fff, 0x008000-0x00ffff, 0x010000-0x017fff, 0x018000-0x01ffff,
SUCCESS.
Writing flash chip... COMPLETE.
Verifying flash... VERIFIED.